ABCA4 and ROM1: Implications for modification of the PRPH2-associated macular dystrophy phenotype

To identify the causative mutation leading to autosomal dominant macular dystrophy, cone dystrophy, and cone-rod dystrophy in a five-generation family and to explain the high intrafamilial phenotypic variation by identifying possible modifier genes.

Modification of the magnetic properties of a heterometallic wheel by inclusion of a Jahn-Teller distorted Cu(II) ion

An investigation into the physical consequences of including a Jahn-Teller distorted Cu(II) ion within an antiferromagnetically coupled ring, [R(2)NH(2)][Cr(7)CuF(8)((O(2)C(t)Bu)(16))] is reported. Inelastic neutron scattering (INS) and electron paramagnetic resonance (EPR) spectroscopic data are simulated using a microscopic spin Hamiltonian, and show that the two Cr-Cu exchange interactions must be inequivalent. One Cr-Cu exchange is found to be antiferromagnetic and the other ferromagnetic. The geometry of the Jahn-Teller elongation is deduced from these results, and shows that a Jahn-Teller elongation axis must lie in the plane of the Cr(7)Cu wheel; the elongation is not observed by X-ray crystallography, due to positional disorder of the Cu site within the wheel. An electronic structure calculation confirms the structural distortion of the Cu site.

Posttranslational modification of the AU-rich element binding protein HuR by protein kinase Cdelta elicits angiotensin II-induced stabilization and nuclear export of cyclooxygenase 2 mRNA

The mRNA stabilizing factor HuR is involved in the posttranscriptional regulation of many genes, including that coding for cyclooxygenase 2 (COX-2). Employing RNA interference technology and actinomycin D experiments, we demonstrate that in human mesangial cells (hMC) the amplification of cytokine-induced COX-2 by angiotensin II (AngII) occurs via a HuR-mediated increase of mRNA stability. Using COX-2 promoter constructs with different portions of the 3' untranslated region of COX-2, we found that the increase in COX-2 mRNA stability is attributable to a distal class III type of AU-rich element (ARE). Likewise, the RNA immunoprecipitation assay showed AngII-induced binding of HuR to this ARE. Using the RNA pulldown assay, we demonstrate that the AngII-caused HuR assembly with COX-2 mRNA is found in free and cytoskeleton-bound polysomes indicative of an active RNP complex. Mechanistically, the increased HuR binding to COX-2-ARE by AngII is accompanied by increased nucleocytoplasmic HuR shuttling and depends on protein kinase Cdelta (PKCdelta), which physically interacts with nuclear HuR, thereby promoting its phosphorylation. Mapping of phosphorylation sites identified serines 221 and 318 as critical target sites for PKCdelta-triggered HuR phosphorylation and AngII-induced HuR export to the cytoplasm. Posttranslational modification of HuR by PKCdelta represents an important novel mode of HuR activation implied in renal COX-2 regulation.

Synthesis of photo-crosslinking probes and their application for the site-selective chemical modification of the 5-HT3 receptor

The 5-HT3 receptor (5-HT3R) is an important ion channel responsible for the transmission of nerve impulses in the CNS and PNS that is activated by the endogenous agonist serotonin (5-hydroxytryptamine, 5-HT). 5-HT3R is the only serotonin receptor belonging to the Cys-loop superfamily of neurotransmitter receptors. Different structural biology approaches can be applied, such as crystallization and x-ray analysis. Nonetheless, characterizing the exact ligand binding site(s) of these dynamic receptors is still challenging. The use of photo-crosslinking probes is an alternative validated approach allowing identification of regions in the protein that are important for the binding of small molecules. We designed our probes based on the core structure of the 5-HT3R antagonist granisetron, a FDA approved drug used for the treatment of chemotherapy-induced nausea and vomiting. We synthesized a small library of photo-crosslinking probes by conjugating diazirines and benzophenones via various linkers to granisetron. We were able to obtain several compounds with diverse linker lengths and different photo-crosslinking moieties that show nanomolar binding affinity for the orthosteric binding site. Furthermore we established a stable h5-HT3R expressing cell line and a purification protocol to yield the receptor in a high purity. Several experiments showed unambiguously that we are able to photo-crosslink our probes with the receptor site-specifically. The functionalised protein was analysed by Western blot and MS-analysis. This yielded the exact covalent modification site, corroborating current ligand binding models derived from mutagenesis and docking studies.

Pemphigus herpetiformis: analysis of the autoantibody profile during the disease course with changes in the clinical phenotype

Pemphigus herpetiformis (PH) is a rare dapsone-responsive variant of pemphigus, characterized by annular and vesiculopustular cutaneous lesions. Most PH serum samples contain autoantibodies against desmoglein (Dsg)1, but not Dsg3, and the presence of the latter is almost invariably associated with mucosal involvement, as predicted based on the 'Dsg compensation theory'. We describe a patient with features characteristic of PH with histologically eosinophilic spongiosis who repeatedly tested positive for anti-Dsg3 but not anti-Dsg1 autoantibodies by ELISA. To investigate whether the peculiar clinical phenotype was due to a distinct immunological profile, the patient's serum was tested by ELISA and immunoblotting using recombinant forms of Dsg3. Serum samples were found to have low and high reactivity against the EC1 and the EC4 domains of Dsg3, respectively, whereas the autoantibodies belonged predominantly to the IgG1 and IgG4 subclasses. The overall immunological profile was typical of pemphigus vulgaris. The patient finally developed isolated oral erosions 22 months after initial presentation, without significant changes in the autoantibody profile and of the targeted antigenic sites. Our patient presented features characteristic of PH. Although circulating anti-Dsg3 antibodies were present, the patient had only cutaneous involvement for a long period. Our findings indicate that the proposed Dsg compensation theory cannot always explain the clinical phenotype, changes in which may occur without apparent modification of the autoantibody profile and antibody specificity. Hence, additional factors, such as Fcgamma-dependent neutrophil activation, may critically affect the clinical presentation of pemphigus.

Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acid-etched titanium surface

The functional capacity of osseointegrated dental implants to bear load is largely dependent on the quality of the interface between the bone and implant. Sandblasted and acid-etched (SLA) surfaces have been previously shown to enhance bone apposition. In this study, the SLA has been compared with a chemically modified SLA (modSLA) surface. The increased wettability of the modSLA surface in a protein solution was verified by dynamic contact angle analysis. Using a well-established animal model with a split-mouth experimental design, implant removal torque testing was performed to determine the biomechanical properties of the bone-implant interface. All implants had an identical cylindrical shape with a standard thread configuration. Removal torque testing was performed after 2, 4, and 8 weeks of bone healing (n = 9 animals per healing period, three implants per surface type per animal) to evaluate the interfacial shear strength of each surface type. Results showed that the modSLA surface was more effective in enhancing the interfacial shear strength of implants in comparison with the conventional SLA surface during early stages of bone healing. Removal torque values of the modSLA-surfaced implants were 8-21% higher than those of the SLA implants (p = 0.003). The mean removal torque values for the modSLA implants were 1.485 N m at 2 weeks, 1.709 N m at 4 weeks, and 1.345 N m at 8 weeks; and correspondingly, 1.231 N m, 1.585 N m, and 1.143 N m for the SLA implants. The bone-implant interfacial stiffness calculated from the torque-rotation curve was on average 9-14% higher for the modSLA implants when compared with the SLA implants (p = 0.038). It can be concluded that the modSLA surface achieves a better bone anchorage during early stages of bone healing than the SLA surface; chemical modification of the standard SLA surface likely enhances bone apposition and this has a beneficial effect on the interfacial shear strength.

Dysfunctions of the motor system in schizophrenia

Objective: Schizophrenia patients suffer from a variety of motor symptoms, including parkinsonism, catatonia, neurological soft signs, abnormal involuntary movements and psychomotor slowing. Methods: Literature review of prevalence rates and presentation of own results. Results: Parkinsonism and abnormal involuntary movements are intrinsic to schizophrenia, but may also be evoked by antipsychotic treatment. Reduced motor activity is associated with negative symptoms, catatonia and psychomotor slowing. Furthermore, 40 % of schizophrenia patients are impaired in gesture performance, which is related to executive and basic motor function. Mild motor disturbances are found in the majority of patients, while severe dysfunctions are limited to a minority. Our neuroimaging studies suggest that hypokinesia is caused by defective cortico-subcortical motor loops in schizophrenia. Taken together, a dimensional approach to schizophrenia motor symptoms seems promising. A purely descriptive assessment of motor signs is preferred over theoryladen categorization. Using objective motor parameters allows finding neural correlates of abnormal motor behaviour. Conclusion: The motor dimension of schizophrenia is linked to distinct disturbances in the cerebral motor system. Targeted modification of the defective motor system might become a relevant treatment option in patients suffering from schizophrenia with predominant motor features.