Eocene nappe tectonics and late Alpine extension in the Central Anatolide belt, western Turkey

Strukturgeologische Untersuchungen belegen, daß die Anatoliden der Westtürkei im Eozän durch die Plazierung der Kykladischen Blauschiefereinheit entlang einer durchbrechenden Überschiebung auf die Menderes-Decken unter grünschieferfaziellen Metamorphosebedingungen entstanden.Die kykladischen Blauschiefer in der Westtürkei enthalten Relikte eines prograden alpinen Gefüges (DA1), welches hochruckmetamorph von Disthen und Chloritoid poikiloblastisch überwachsen wurde. Dieses Mineralstadium dauerte noch während des Beginns des nachfolgenden Deformationsereignisses (DA2) an, welches durch NE-gerichtete Scherung und Dekompression charakterisiert ist. Die nachfolgende Deformation (DA3) war das erste Ereignis, das beide Einheiten, sowohl die kykladische Blauschifereinheit als auch die Menderes-Decken, gemeinsam erfaßte. Der Überschiebungskontakt zwischen der kykladischen Blauschiefereinheit und den Menderes-Decken ist eine DA3-Scherzone: die ‘Cycladic-Menderes Thrust’ (CMT). Entlang der CMT-Überschiebungsbahn wurden die kykladischen Blauschiefer gegen veschiedene Einheiten der MN plaziert. Die CMT steigt nach S zum strukturell Hangenden hin an und kann daher als eine durchbrechende Überschiebung entlang einer nach S ansteigenden Rampe betrachtet werden. In den kykladischen Blauschiefern überprägen DA3-Strukturen, die im Zusammenhang mit der CMT stehen, hochdruckmentamorphe Gefüge.In den Menderes-Decken, dem Liegenden der CMT, wird DA3 durch regional vebreitete Gefügeelemente dokumentiert, die im Zusammenhang mit S-gerichteten Schersinnindikatoren stehen. DA3-Gefüge haben die Decken intern deformiert und bilden jene Scherzonen, welche die Decken untereinander abgrenzen. In der Çine-Decke können granitische Gesteine in Orthogneise und Metagranite unterteilt werden. Die Deformationsgeschichte dieser Gesteine dokumentiert zwei Ereignisse. Ein frühes amphibolitfazielles Ereignis erfaßte nur die Orthogneise, in denen vorwiegend NE-SW orientierte Lineare und NE-gerichtete Schersinnindikatoren entstanden. Die jüngeren Metagranite wurden sowohl durch vereinzelte DA3-Scherzonen, als auch in einer großmaßstäblichen DA3-Scherzone am Südrand des Çine-Massivs deformiert. In DA3-Scherzonen sind die Lineare N-S orientiert und die zugehörigen Schersinnindikatoren zeigen S-gerichtete Scherung unter grünschieferfaziellen Bedingungen an. Diese grünschieferfaziellen Scherzonen überprägen die amphibolitfaziellen Gefüge in den Orthogneisen. Magmatische Zirkone aus einem Metagranit, der einen Orthogneiss mit Top-NE Gefügen durchschlägt, ergaben ein 207Pb/206Pb-Alter von 547,2±1,0 Ma. Dies deutet darauf hin, daß DPA proterozoischen Alters ist. Dies wird auch durch die Tatsache gestützt, daß triassische Granite in der Çine- und der Bozdag-Decke keine DPA-Gefüge zeigen. Die jüngeren Top-S-Gefüge sind wahrscheinlich zur gleichen Zeit entstanden wie die ältesten Gefüge der Bayindir-Decke.Das Fehlen von Hochdruck-Gefügen im Liegenden der CMT impliziert eine Exhumierung der kykladischen Blauschiefer von mehr ca. 35 km, bevor diese im Eozän auf die Menderes-Decken aufgeschoben wurden. Die substantiellen Unterschiede bezüglich in der tektonometamorphen Geschichte der kykladischen Blauschiefer und der Menderes-Decken widersprechen der Modellvorstellung eines lateral kontinuierlichen Orogengürtels, nach der die Menderes-Decken als östliche Fortsezung der kykladischen Blauschiefer angesehen werden.Die Analyse spröder spätalpiner Deformationsstrukturen und das regionale Muster mit Hilfe von Spaltspurdatierung modellierter Abkühlalter deuten darauf hin, daß die Struktur des Eozänen Deckenstapels durch miozäne bis rezente Kernkomplex-Bildung stark modifiziert wurde. Eine großmaßstäbliche Muldenstruktur im zentralen Teil der Anatoliden hat sich als Folge zweier symmetrisch angeordneter Detachment-Systeme von initial steilen zu heute flachen Orientierungen im Einflußbreich von ’Rolling Hinges’ gebildet. Die Detachment-Störungen begrenzen den ‘Central Menderes metamorphic core complex’ (CMCC). Das Muster der Apatit-Spaltspuralter belegt, daß die Bildung des CMCC im Miozän begann. Durch die Rück-Deformierung von parallel zur Foliation konstruierten Linien gleicher Abkühlalter kann gezeigt werden, daß die Aufwölbung im Liegenden der Detachments zur Entstehung der Muldenstruktur führte. Das hohe topographische Relief im Bereich des CMCC ist eine Folge der Detachment-Störungen, was darauf hindeutet daß der obere Mantel in den Prozeß mit einbezogen gewesen ist.

Charakterisierung der Vinorin-Synthase aus Rauvolfia serpentina durch Reinigung, Expression, Mutation und Kristallisation

ABSTRACTDie vorliegende Arbeit befasste sich mit der Reinigung,heterologen Expression, Charakterisierung, molekularenAnalyse, Mutation und Kristallisation des EnzymsVinorin-Synthase. Das Enzym spielt eine wichtige Rolle inder Ajmalin-Biosynthese, da es in einerAcetyl-CoA-abhängigen Reaktion die Umwandlung desSarpagan-Alkaloids 16-epi-Vellosimin zu Vinorin unterBildung des Ajmalan-Grundgerüstes katalysiert. Nach der Reinigung der Vinorin-Synthase ausHybrid-Zellkulturen von Rauvolfia serpentina/Rhazya strictamit den fünf chromatographischen TrennmethodenAnionenaustauschchromatographie an SOURCE 30Q, HydrophobeInteraktionen Chromatographie an SOURCE 15PHE,Chromatographie an MacroPrep Ceramic Hydroxyapatit,Anionenaustauschchromatographie an Mono Q undGrößenausschlußchromatographie an Superdex 75 konnte dieVinorin-Synthase aus 2 kg Zellkulturgewebe 991fachangereichert werden.Das nach der Reinigung angefertigte SDS-Gel ermöglichte eineklare Zuordnung der Protein-Bande als Vinorin-Synthase.Der Verdau der Enzymbande mit der Endoproteinase LysC unddie darauffolgende Sequenzierung der Spaltpeptide führte zuvier Peptidsequenzen. Der Datenbankvergleich (SwissProt)zeigte keinerlei Homologien zu Sequenzen bekannterPflanzenenzyme. Mit degenerierten Primern, abgeleitet voneinem der erhaltenen Peptidfragmente und einer konserviertenRegion bekannter Acetyltransferasen gelang es, ein erstescDNA-Fragment der Vinorin-Synthase zu amplifizieren. Mit derMethode der RACE-PCR wurde die Nukleoidsequenzvervollständigt, was zu einem cDNA-Vollängenklon mit einerGröße von 1263 bp führte, der für ein Protein mit 421Aminosäuren (46 kDa) codiert.Das Vinorin-Synthase-Gen wurde in den pQE2-Expressionsvektorligiert, der für einen N-terminalen 6-fachen His-tagcodiert. Anschließend wurde sie erstmals erfolgreich in E.coli im mg-Maßstab exprimiert und bis zur Homogenitätgereinigt. Durch die erfolgreiche Überexpression konnte dieVinorin-Synthase eingehend charakterisiert werden. DerKM-Wert für das Substrat Gardneral wurde mit 20 µM, bzw.41.2 µM bestimmt und Vmax betrug 1 pkat, bzw. 1.71 pkat.Nach erfolgreicher Abspaltung des His-tags wurden diekinetischen Parameter erneut bestimmt (KM- Wert 7.5 µM, bzw.27.52 µM, Vmax 0.7 pkat, bzw. 1.21 pkat). Das Co-Substratzeigt einen KM- Wert von 60.5 µM (Vmax 0.6 pkat). DieVinorin-Synthase besitzt ein Temperatur-Optimum von 35 °Cund ein pH-Optimum bei 7.8.Homologievergleiche mit anderen Enzymen zeigten, dass dieVinorin-Synthase zu einer noch kleinen Familie von bisher 10Acetyltransferasen gehört. Alle Enzyme der Familie haben einHxxxD und ein DFGWG-Motiv zu 100 % konserviert. Basierendauf diesen Homologievergleichen und Inhibitorstudien wurden11 in dieser Proteinfamilie konservierte Aminosäuren gegenAlanin ausgetauscht, um so die Aminosäuren einer in derLiteratur postulierten katalytischen Triade(Ser/Cys-His-Asp) zu identifizieren.Die Mutation aller vorhandenen konservierten Serine undCysteine resultierte in keiner Mutante, die zumvollständigen Aktivitätsverlust des Enzyms führte. Nur dieMutationen H160A und D164A resultierten in einemvollständigen Aktivitätsverlust des Enzyms. Dieses Ergebniswiderlegt die Theorie einer katalytischen Triade und zeigte,dass die Aminosäuren H160A und D164A exklusiv an derkatalytischen Reaktion beteiligt sind.Zur Überprüfung dieser Ergebnisse und zur vollständigenAufklärung des Reaktionsmechanismus wurde dieVinorin-Synthase kristallisiert. Die bis jetzt erhaltenenKristalle (Kristallgröße in µm x: 150, y: 200, z: 200)gehören der Raumgruppe P212121 (orthorhombisch primitiv) anund beugen bis 3.3 Å. Da es bis jetzt keine Kristallstruktureines zur Vinorin-Synthase homologen Proteins gibt, konntedie Struktur noch nicht vollständig aufgeklärt werden. ZurLösung des Phasenproblems wird mit der Methode der multiplenanomalen Dispersion (MAD) jetzt versucht, die ersteKristallstruktur in dieser Enzymfamilie aufzuklären.

A structural and metamorphic study of the southern Menderes Massif (Western Turkey)

P-T conditions, paragenetic studies and the relation between mineral growth, deformation and - when possible- isograd minerals have been used to describe the type of metamorphism involved within lower units of the southern Menderes Massif of the Anatolide Belt in western Turkey. The study areas mainly consist of Proterozoic orthogneiss and surrounding schists of presumed Paleozoic age. Both units are seen as nappes in the southern study area, the Çine and the Selimiye nappe, on the whole corresponding to Proterozoic orthogneiss and surrounding schists, respectively. The Çine and Selimiye nappes are part of a complex geological structure within the core series of the Menderes Massif. Their emplacement under lower greenschist facies conditions, would result from closure of the northern Neo-Thethys branch during the Eocene. These two nappes are separated by a major tectonic structure, the Selimiye shear zone, which records top-to-the-S shearing under greenschist facies conditions. Amphibolite to upper amphibolite facies metamorphism is widely developed within the metasedimentary rocks of the Çine nappe whereas no metamorphism exceeding lower amphibolite facies has been observed in the Selimiye nappe. In the southern margin of the Çine Massif, around Selimiye and Millas villages, detailed sampling has been undertaken in order to map mineral isograds within the Selimiye nappe and to specify P-T conditions in this area. The data collected in this area reveals a global prograde normal erosion field gradient from south to north and toward the orthogneiss. The mineralogical parageneses and P-T estimates are correlated with Barrovian-type metamorphism. A jump of P-T conditions across the Selimiye shear zone has been identified and estimated c. 2 kbar and 100 °C which evidences the presence of amphibolite facies metasedimentary rocks near the orthogneiss. Metasedimentary rocks from the overlying Selimiye nappe have maximum P-T conditions of c. 4-5 kbar and c. 525 °C near the base of the nappe. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P-T conditions of about 7 kbar and >550 °C. Kinematic indicators in both nappes consistently show a top-S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet-chlorite zone at the base, the chloritoid-biotite zone and the biotite-chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional SR foliation. 40Ar/39Ar mica ages indicate an Eocene age of metamorphism in the Selimiye nappe and underneath the Çine nappe in this area. Metasedimentary rocks of the Çine nappe 20-30 km north of the Selimiye shear zone record maximum P-T conditions of 8-11 kbar and 600-650 °C. Kinematic indicators show mainly top-N shear sense associated with prograde amphibolite facies metamorphism. An age of about 550 Ma could be indicated for amphibolite facies metamorphism and associated top-N shear in the orthogneiss and metasedimentary rocks of the Çine nappe. However, there is no evidence for polymetamorphism in the 6 metasedimentary rocks of the Çine nappe, making tectonic interpretations about late Neoproterozoic to Cambrian and Tertiary metamorphic events speculative. In the western margin of the Çine Massif metamorphic mineral parageneses and pressure– temperature conditions lead to similar conclusion regarding the erosion field gradient, prograde normal toward the orthogneiss. The contact between orthogneiss and surrounding metasedimentary rocks is mylonitic and syn-metamorphism. P-T estimates are those already observed within the Selimiye nappe and correlated with lower amphibolite facies parageneses. Finally additional data in the eastern part and a general paragenetic study within the Menderes Massif lower units, the Çine and the Selimiye nappes, strongly suggest a single Barrovian-type metamorphism predating Eocene emplacement of the high pressure–low temperature Lycean and Cycladic blueschist nappes. Metamorphic mineral parageneses and pressure–temperature conditions do not support the recently proposed model of high pressure–low temperature metamorphic overprinting, which implies burial of the lower units of the Menderes Massif up to depth of 30 km, as a result of closure of the Neo-Tethys. According to the geochronological problem outlined during this thesis, there are two possible schemes: either Barrovian-type metamorphism is Proterozoic in age and part of the sediments from Selimiye nappe (lower amphibolite facies) has to be proterozoic of age too, or Barrovian-type metamorphism in Eocene of age. In the first case the structure observed now in the core series would correspond to simple exhumation of Proterozoic basement. In the latter case a possible correlation with closure of Neo-Tethys (sensu stricto, southern branch) is envisaged.

Foliation boudinage

In this thesis foliation boudinage and related structures have been studied based on field observations and numerical modeling. Foliation boudinage occurs in foliated rocks independent of lithology contrast. The developing structures are called ‘Foliation boudinage structures (FBSs)’ and show evidence for both ductile and brittle deformation. They are recognized in rocks by perturbations in monotonous foliation adjacent to a central discontinuity, mostly filled with vein material. Foliation boudinage structures have been studied in the Çine Massif in SW-Turkey and the Furka Pass-Urseren Zone in central Switzerland. Four common types have been distinguished in the field, named after vein geometries in their boudin necks in sections normal to the boudin axis: lozenge-, crescent-, X- and double crescent- type FBSs. Lozengetype FBSs are symmetric and characterized by lozenge-shaped veins in their boudin neck with two cusps facing opposite sides. A symmetrical pair of flanking folds occurs on the two sides of the vein. Crescent-type FBSs are asymmetric with a single smoothly curved vein in the boudin neck, with vein contacts facing to one side. X- and double crescent- type FBSs are asymmetric. The geometry of the neck veins resembles that of cuspate-lobate structures. The geometry of flanking structures is related to the shape of the veins. The veins are mostly filled with massive quartz in large single crystals, commonly associated with tourmaline, feldspar and biotite and in some cases with chlorite. The dominance of large facetted single quartz crystals and spherulitic chlorite in the veins suggest that the minerals grew into open fluidfilled space. FLAC experiments show that fracture propagation during ductile deformation strongly influences the geometry of developing veins. The cusps of the veins are better developed in the case of propagating fractures. The shape of the boudin neck veins in foliation boudinage depends on the initial orientation and shape of the fracture, the propagation behaviour of the fracture, the geometry of bulk flow, and the stage at which mineral filling takes place. A two dimensional discrete element model was used to study the progressive development of foliation boudinage structures and the behavior of visco-elastic material deformed under pure shear conditions. Discrete elements are defined by particles that are connected by visco-elastic springs. Springs can break. A number of simulations was Abstract vii performed to investigate the effect of material properties (Young’s modulus, viscosity and breaking strength) and anisotropy on the developing structures. The models show the development of boudinage in single layers, multilayers and in anisotropic materials with random mica distribution. During progressive deformation different types of fractures develop from mode I, mode II to the combination of both. Voids develop along extension fractures, at intersections of conjugate shear fractures and in small pull-apart structures along shear fractures. These patterns look similar to the natural examples. Fractures are more localized in the models where the elastic constants are low and the competence contrast is high between the layers. They propagate through layers where the constants are high and the competence contrast is relatively low. Flow localize around these fractures and voids. The patterns similar to symmetric boudinage structures and extensional neck veins (e.g. lozenge type) more commonly develop in the models with lower elastic constants and anisotropy. The patterns similar to asymmetric foliation boudinage structures (e.g. X-type) develop associated with shear fractures in the models where elastic constants and anisotropy of the materials are relatively high. In these models boudin neck veins form commonly at pull-aparts along the shear fractures and at the intersection of fractures.

The prehistoric inhabitants of the Wadi Howar : an anthropological study of human skeletal remains from the Sudanese part of the Eastern Sahara

All currently available human skeletal remains from the Wadi Howar (Eastern Sahara, Sudan) were employed in an anthropological study. The study’s first aim was to describe this unique 5th to 2nd millennium BCE material, which comprised representatives of all three prehistoric occupation phases of the region. Detecting diachronic differences in robusticity, occupational stress levels and health within the spatially, temporally and culturally heterogeneous sample was its second objective. The study’s third goal was to reveal metric and non-metric affinities between the different parts of the series and between the Wadi Howar material and other relevant prehistoric as well as modern African populations. rnThe reconstruction and comprehensive osteological analysis of 23 as yet unpublished individuals, the bulk of the Wadi Howar series, constituted the first stage of the study. The analyses focused on each individual’s in situ position, state of preservation, sex, age at death, living height, living weight, physique, biological ancestry, epigenetic traits, robusticity, occupational stress markers, health and metric as well as morphological characteristics. Building on the results of these efforts and the re-examination of the rest of the material, the Wadi Howar series as a whole, altogether 32 individuals, could be described. rnA wide variety of robusticity, occupational stress and health variables was evaluated. The pre-Leiterband (hunter-gatherer-fisher/hunter-gatherer-fisher-herder) and the Leiterband (herder-gatherer) data of over a third of these variables differed statistically significantly or in tendency from each other. The Leiterband sub-sample was characterised by higher enamel hypoplasia frequencies, lower mean ages at death and less pronounced expressions of occupational stress traits. This pattern was interpreted as evidence that the adoption and intensification of animal husbandry did probably not constitute reactions to worsening conditions. Apart from that, the relevant observations, noteworthy tendencies and significant differences were explained as results of a broader spectrum of pre-Leiterband subsistence activities and the negative side effects of the increasingly specialised herder-gatherer economy of the Leiterband phase. rnUsing only the data which could actually be collected from it, multiple, separate, individualised discriminant function analyses were carried out for each Wadi Howar skeleton to determine which prehistoric and which modern comparative sample it was most similar to. The results of all individual analyses were then summarised and examined as a whole. Thus it became possible to draw conclusions about the affinities the Wadi Howar material shared with prehistoric as well as modern populations and to answer questions concerning the diachronic links between the Wadi Howar’s prehistoric populations. When the Wadi Howar remains were positioned in the context of the selected prehistoric (Jebel Sahaba/Tushka, A-Group, Malian Sahara) and modern comparative samples (Southern Sudan, Chad, Mandinka, Somalis, Haya) in this fashion three main findings emerged. Firstly, the series as a whole displayed very strong affinities with the prehistoric sample from the Malian Sahara (Hassi el Abiod, Kobadi, Erg Ine Sakane, etc.) and the modern material from Southern Sudan and, to a lesser extent, Chad. Secondly, the pre-Leiterband and the Leiterband sub-sample were closer to the prehistoric Malian as well as the modern Southern Sudanese material than they were to each other. Thirdly, the group of pre-Leiterband individuals approached the Late Pleistocene sample from Jebel Sahaba/Tushka under certain circumstances. A theory offering explanations for these findings was developed. According to this theory, the entire prehistoric population of the Wadi Howar belonged to a Saharo-Nilotic population complex. The Jebel Sahaba/Tushka population constituted an old Nilotic and the early population of the Malian Sahara a younger Saharan part of this complex. The pre-Leiterband groups probably colonised the Wadi Howar from the east, either during or soon after the original Saharo-Nilotic expansion. Unlike the pre-Leiterband groups, the Leiterband people originated somewhere west of the Wadi Howar. They entered the region in the context of a later, secondary Saharo-Nilotic expansion. In the process, the incoming Leiterband groups absorbed many members of the Wadi Howar’s older pre-Leiterband population. The increasing aridification of the Wadi Howar region ultimately forced its prehistoric inhabitants to abandon the wadi. Most of them migrated south and west. They, or groups closely related to them, probably were the ancestors of the majority of the Nilo-Saharan-speaking pastoralists of modern-day Southern Sudan and Eastern Chad.