New design of polyphenylene dendrimers for full-color light-emitting diodes

Dendritic systems, and in particular polyphenylene dendrimers, have recently attracted considerable attention from the synthetic organic chemistry community, as well as from photophysicists, particularly in view of the search for synthetic model analogies to photoelectric materials to fabricate organic light-emitting diodes (OLEDs), and even more advanced areas of research such as light-harvesting system, energy transfer and non-host device. Geometrically, dendrimers are unique systems that consist of a core, one or more dendrons, and surface groups. The different parts of the macromolecule can be selected to give the desired optoelectronic and processing properties. Compared to small molecular or polymeric light-emitting materials, these dendritic materials can combine the benefits of both previous classes. The high molecular weights of these dendritic macromolecules, as well as the surface groups often attached to the distal ends of the dendrons, can improve the solution processability, and thus can be deposited from solution by simple processes such as spin-coating and ink-jet printing. Moreover, even better than the traditional polymeric light-emitting materials, the well-defined monodisperse distributed dendrimers possess a high purity comparable to that of small molecules, and as such can be fabricated into high performance OLEDs. Most importantly, the emissive chromophores can be located at the core of the dendrimer, within the dendrons, and/or at the surface of the dendrimers because of their unique dendritic architectures. The different parts of the macromolecule can be selected to give the desired optoelectronic and processing properties. Therefore, the main goals of this thesis are the design and synthesis, characterization of novel functional dendrimers, e.g. polytriphenylene dendrimers for blue fluorescent, as well as iridium(III) complex cored polyphenylene dendrimers for green and red phosphorescent light emitting diodes. In additional to the above mentioned advantages of dendrimer based OLEDs, the modular molecular architecture and various functionalized units at different locations in polyphenylene dendrimers open up a tremendous scope for tuning a wide range of properties in addition to color, such as intermolecular interactions, charge mobility, quantum yield, and exciton diffusion. In conclusion, research into dendrimer containing OLEDs combines fundamental aspects of organic semiconductor physics, novel and highly sophisticated organic synthetic chemistry and elaborate device technology.rn

Packing a trunk : a physically based approach with full motional freedom

Geometric packing problems may be formulated mathematically as constrained optimization problems. But finding a good solution is a challenging task. The more complicated the geometry of the container or the objects to be packed, the more complex the non-penetration constraints become. In this work we propose the use of a physics engine that simulates a system of colliding rigid bodies. It is a tool to resolve interpenetration conflicts and to optimize configurations locally. We develop an efficient and easy-to-implement physics engine that is specialized for collision detection and contact handling. In succession of the development of this engine a number of novel algorithms for distance calculation and intersection volume were designed and imple- mented, which are presented in this work. They are highly specialized to pro- vide fast responses for cuboids and triangles as input geometry whereas the concepts they are based on can easily be extended to other convex shapes. Especially noteworthy in this context is our ε-distance algorithm - a novel application that is not only very robust and fast but also compact in its im- plementation. Several state-of-the-art third party implementations are being presented and we show that our implementations beat them in runtime and robustness. The packing algorithm that lies on top of the physics engine is a Monte Carlo based approach implemented for packing cuboids into a container described by a triangle soup. We give an implementation for the SAE J1100 variant of the trunk packing problem. We compare this implementation to several established approaches and we show that it gives better results in faster time than these existing implementations.

Measurement of the forward-backward asymmetry of Z boson decays in electron-positron pairs with the ATLAS detector in proton-proton collisions at root out s = 7TeV at the LHC

In this thesis the measurement of the effective weak mixing angle wma in proton-proton collisions is described. The results are extracted from the forward-backward asymmetry (AFB) in electron-positron final states at the ATLAS experiment at the LHC. The AFB is defined upon the distribution of the polar angle between the incoming quark and outgoing lepton. The signal process used in this study is the reaction pp to zgamma + X to ee + X taking a total integrated luminosity of 4.8\,fb^(-1) of data into account. The data was recorded at a proton-proton center-of-mass energy of sqrt(s)=7TeV. The weak mixing angle is a central parameter of the electroweak theory of the Standard Model (SM) and relates the neutral current interactions of electromagnetism and weak force. The higher order corrections on wma are related to other SM parameters like the mass of the Higgs boson.rnrnBecause of the symmetric initial state constellation of colliding protons, there is no favoured forward or backward direction in the experimental setup. The reference axis used in the definition of the polar angle is therefore chosen with respect to the longitudinal boost of the electron-positron final state. This leads to events with low absolute rapidity have a higher chance of being assigned to the opposite direction of the reference axis. This effect called dilution is reduced when events at higher rapidities are used. It can be studied including electrons and positrons in the forward regions of the ATLAS calorimeters. Electrons and positrons are further referred to as electrons. To include the electrons from the forward region, the energy calibration for the forward calorimeters had to be redone. This calibration is performed by inter-calibrating the forward electron energy scale using pairs of a central and a forward electron and the previously derived central electron energy calibration. The uncertainty is shown to be dominated by the systematic variations.rnrnThe extraction of wma is performed using chi^2 tests, comparing the measured distribution of AFB in data to a set of template distributions with varied values of wma. The templates are built in a forward folding technique using modified generator level samples and the official fully simulated signal sample with full detector simulation and particle reconstruction and identification. The analysis is performed in two different channels: pairs of central electrons or one central and one forward electron. The results of the two channels are in good agreement and are the first measurements of wma at the Z resonance using electron final states at proton-proton collisions at sqrt(s)=7TeV. The precision of the measurement is already systematically limited mostly by the uncertainties resulting from the knowledge of the parton distribution functions (PDF) and the systematic uncertainties of the energy calibration.rnrnThe extracted results of wma are combined and yield a value of wma_comb = 0.2288 +- 0.0004 (stat.) +- 0.0009 (syst.) = 0.2288 +- 0.0010 (tot.). The measurements are compared to the results of previous measurements at the Z boson resonance. The deviation with respect to the combined result provided by the LEP and SLC experiments is up to 2.7 standard deviations.

Suche nach dem Higgs-Boson im Zerfallskanal H WW eny e myny my mit dem D0-Detektor

Diese Arbeit beschäftigt sich mit der Suche nach dem Higgs-Boson.rn Dazu wurden die Daten des D0-Experimentes am Fermi National rn Accelerator Laboratory analysiert. Diese stammen ausrn Proton-Antiproton-Kollisionen, welche vom Tevatron-Beschleuniger beirn einer Schwerpunktsenergie von sqrt(s)=1.96 TeV erzeugtrn wurden. Der Datensatz umfasst mit einer integrierten Luminosität vonrn 9.7 fb^-1 den vollen RunII, welcher von April 2002 bisrn September 2011 aufgezeichnet wurde. Die Suche wurde für dreirn unterschiedliche Modelle durchgeführt: Das Standardmodell, einrn fermiophobes Higgs-Modell und ein Modell mit einer viertenrn Fermiongeneration. Zusätzlich wurde der Wirkungsquerschnitt derrn nicht resonanten WW-Produktion gemessen.rnrn Dazu wurden Daten mit einem Elektron, einem Myon und fehlenderrn Transversalenergie im Endzustand untersucht. Dieser Endzustand wirdrn beim Zerfall eines Higgs-Bosons in zwei W-Bosonen mit anschließendemrn Zerfall in ein Elektron, ein Myon und zwei Neutrinos erwartet undrn weist die größte Sensitivität für die Suche am Tevatron auf.rnrn Weder für das Standardmodell noch für die erweiterten Modelle konntern ein Hinweis auf ein Higgs-Signal gefunden werden. Deshalb wurdenrn obere Grenzen auf den Produktionswirkungsquerschnitt für diern einzelnen Modelle bestimmt. Die oberen Grenzen für Higgs-Bosonen imrn Rahmen des Standardmodells reichen von 28*sigma_SM für einrn Higgs-Boson mit einer Masse von 100 GeV bis zu einemrn Ausschluss des Standardmodell-Higgs-Bosons im Bereich zwischen 160rn und 167 GeV mit 95% Vertrauensniveau. Damit ist der inrn dieser Arbeit beschriebene Kanal der einzige Kanal amrn D0-Experiment, welcher eine ausreichend hohe Sensitivität erreicht,rn um allein ein Higgs-Boson im hohen Massenbereich auszuschließen. Fürrn ein Higgs-Boson mit 125 GeV Masse sind die Ergebnisse sowohlrn mit der Signal+Untergrund- als auch mit der Untergrund-Hypothesern kompatibel. rn Im Rahmen des fermiophoben Higgs-Modells wurden oberen Grenzenrn zwischen 2*sigma_FHM und 4*sigma_FHM imrn Massenbereich zwischen 100 und 170 GeV bestimmt. Für diern betrachteten Modelle mit einer vierten Fermiongeneration konnte einrn Higgs-Boson in einem weiten Massenbereich zwischen 135 undrn 220 GeV mit 95% Vertrauensniveau ausgeschlossen werden.rnrn Die Messung des Wirkungsquerschnitts der nicht-resonantenrn WW-Produktion ist die genaueste Messung fürrn sqrt(s)=1.96 TeV. Der gemessene Wirkungsquerschnitt beträgtrn sigma_ppbar->WW^em=11.1 +- 0.6 (stat.) +- 0.6 (syst.) pbrn und bestätigt damit die theoretische NLO-Vorhersage im Rahmen ihrerrn Unsicherheiten.rn