The influence of heat treatment on the phase relations in mineral growth systems

ABSTRACT Corundum is one of the most famous gems materials. Different heat treatment methods for enhancement purposes are commonly applied and accepted in the gem market. With this reason, the identification of the natural, unheated corundum is intensively investigated. In this study, aluminium hydroxide minerals and zircon are focused to observe the crystallization and phase change of these minerals during heat treatment procedures. Aluminium hydroxide minerals can be transformed to alumina with the corundum structure by heating. The reaction history of aluminium hydroxide minerals containing corundum was investigated comparing it with diaspore, boehmite, gibbsite and bayerite by TG and DTA methods. These hydroxide minerals were entirely transformed to corundum after heating at 600°C. Zircon inclusions in corundums from Ilakaka, Madagascar, were investigated for the influence of different heat-treatment temperatures on the recovery of their crystalline structure and on possible reactions within and with the host crystals. The host corundum was heated at 500, 800, 1000, 1200, 1400, 1600 and 1800°C. The crystallinity, the trapped pressure, and the decomposition of the zircon inclusions within the host corundum have been investigated by Raman spectroscopy. Radiation-damaged zircon inclusions may be used as an indicator for unheated Ilakaka corundum crystals. They are fully recrystallized after heating at 1000°C influencing the lowering of the 3 Raman band shift, the decreasing of FWHM of the 3 Raman band and the decreasing of the trapped pressure between the inclusion and the host corundum. Under microscopic observation, surface alterations of the inclusions can be firstly seen from transparent into frosted-like appearance at 1400°C. Then, between 1600°C and 1800 °C, the inclusion becomes partly or even completely molten. The decomposition of the zircon inclusion to m-ZrO2 and SiO2-glass phases begins at the rim of the inclusion after heating from 1200°C to 1600°C which can be detected by the surface change, the increase of the 3 Raman band position and the trapped pressure. At 1800°C, the zircon inclusions entirely melt transforming to solid phases during cooling like m-ZrO2 and SiO2-glass accompanied by an increase of pressure between the transformed inclusion and its host.

Structure formation of amphiphilic molecules at the air,water interface and after film transfer

One of the basic concepts of molecular self-assembly is that the morphology of the aggregate is directly related to the structure and interaction of the aggregating molecules. This is not only true for the aggregation in bulk solution, but also for the formation of Langmuir films at the air/water interface. Thus, molecules at the interface do not necessarily form flat monomolecular films but can also aggregate into multilayers or surface micelles. In this context, various novel synthetic molecules were investigated in terms of their morphology at the air/water interface and in transferred films. rnFirst, the self-assembly of semifluorinated alkanes and their molecular orientation at the air/water interface and in transferred films was studied employing scanning force microscopy (SFM) and Kelvin potential force microscopy. Here it was found, that the investigated semifluorinated alkanes aggregate to form circular surface micelles with a diameter of 30 nm, which are constituted of smaller muffin-shaped subunits with a diameter of 10 nm. A further result is that the introduction of an aromatic core into the molecular structure leads to the formation of elongated surface micelles and thus implements a directionality to the self-assembly. rnSecond, the self-assembly of two different amphiphilic hybrid materials containing a short single stranded desoxyribonucleic acid (DNA) sequence was investigated at the air/water interface. The first molecule was a single stranded DNA (11mer) molecule with two hydrophobically modified 5-(dodec-1-ynyl)uracil nucleobases at the terminal 5'-end of the oligonucleotide sequence. Isotherm measurements revealed the formation of semi-stable films at the air/water interface. SFM imaging of films transferred via Langmuir-Blodgett technique supported this finding and indicated mono-, bi- and multilayer formation, according to the surface pressure applied upon transfer. Within these films, the hydrophilic DNA sequence was oriented towards air covering 95% of the substrate.rnSimilar results were obtained with a second type of amphiphile, a DNA block copolymer. Furthermore, the potential to perform molecular recognition experiments at the air/water interface with these DNA hybrid materials was evaluated.rnThird, polyglycerol ester molecules (PGE), which are known to form very stable foams, were studies. Aim was to elucidate the molecular structure of PGE molecules at the air/water interface in order to comprehend the foam stabilization mechanism. Several model systems mimicking the air/water interface of a PGE foam and methods for a noninvasive transfer were tested and characterized by SFM. It could be shown, that PGE stabilizes the air/water interface of a foam bubble by formation of multiple surfactant layers. Additionally, a new transfer technique, the bubble film transfer was established and characterized by high speed camera imaging.The results demonstrate the diversity of structures, which can be formed by amphiphilic molecules at the air/water interface and after film transfer, as well as the impact of the chemical structure on the aggregate morphology.

Effects of maternal PETN treatment of spontaneously hypertensive rats on blood pressure in the offspring

Pentaerithrityltetranitrat (PETN) ist ein organisches Nitrat und wird in der Klinik zur Behandlung der Angina Pectoris eingesetzt. PETN hat, wenn direkt verabreicht, kaum Wirkung auf den Blutdruck. Diese Arbeit wurde konzipiert, um einen potentiellen „perinatalen Programmierung“-Effekt von PETN in spontan-hypertensiven Ratten (SHR), einem Rattenmodel der genetischen Hypertonie, zu testen. Die F0-Elterntiere wurden mit PETN (50 mg/kg/Tag) während der Schwangerschaft und der Laktation behandelt; die F1-Nachkommen bekamen nach der Ablaktation normales Haltungsfutter. Der Blutdruck wurde an den Nachkommen vom 3. Monat bis zum 8. Monat nach der Geburt gemessen. Maternale PETN-Behandlung hatte kaum Wirkung auf den Blutdruck in den männlichen SHR-Nachkommen. Dagegen zeigten die weiblichen Nachkommen der PETN-Behandlungsgruppe eine persistente Reduktion des Blutdrucks. Der systolische Blutdruck war in den weiblichen Nachkommen in der PETN-Gruppe etwa 13 mmHg niedriger im 4. Monat und etwa 10 mmHg niedriger im 8. Monat als in den Kontrolltieren. Dieser lang-anhaltende Effekt ging mit einer substanziellen Änderung der Genexpression einher, die auch beim 8. Monat noch nachzuweisen war. In den Aorten der weiblichen F1-Nachkommen wurde Veränderungen an Genexpression der α-adrenergen Rezeptoren sowie Endothelin-Rezeptoren festgestellt, die aber funktionell von minimaler Bedeutung für die PETN-Wirkung waren. Hingegen war eine klare Rolle des StickstoffmoNOXid (NO) zu sehen. Maternale PETN-Behandlung führte zur Heraufregulation der endothelialen NO-Synthase (eNOS) und der GTP-Cyclohydrolase I (GCH-1). GCH-1 ist für die Biosynthese des Tetrahydrobiopterins, eines essentiellen eNOS-Kofaktors, entscheidend, und dadurch auch für die eNOS-Funktionalität. Zusätzlich wurden auch anti-oxidative Enzyme wie die mitochondriale Superoxid-Dismutase (SOD2), die Glutathion-Peroxidase 1 (GPx1) und die Hem-Oxygenase 1 (HO-1) heraufreguliert, und die Superoxid-produzierende NADPH-Oxidase NOX1 herunterreguliert. Dies kann zur Verminderung vom oxidativen Stress und Erhöhung der NO-Bioverfügbarkeit führen. Letztlich wurde auch ~ 74 ~ die Sirtuin 1 (SIRT1) durch maternale PETN-Behandlung heraufreguliert, die auch zur Heraufregulation der SOD2, GPx1 und eNOS beitragen kann. Im Organbad-Experiment wurde die Acetylcholin-induzierte, Endothel-abhängige Vasodilatation in der Aorta der weiblichen Nachkommen der PETN-Gruppe verstärkt. Diese verbesserte Endothelfunktion, was vermutlich aus der Genexpressionsänderung resultiert, stellt sehr wahrscheinlich einen Schlüsselmechanismus der Blutdrucksenkung in den Nachkommen der PETN-behandelten F0-Tiere dar.

Novel metallo-porphyrin based colourimetric amine sensors and their processing via plasma enhanced chemical vapour deposition at atmospheric pressure : synthesis, characterisation and mechanistic studies

Volatile amines are prominent indicators of food freshness, as they are produced during many microbiological food degradation processes. Monitoring and indicating the volatile amine concentration within the food package by intelligent packaging solutions might therefore be a simple yet powerful way to control food safety throughout the distribution chain.rnrnIn this context, this work aims to the formation of colourimetric amine sensing surfaces on different substrates, especially transparent PET packaging foil. The colour change of the deposited layers should ideally be discernible by the human eye to facilitate the determination by the end-user. rnrnDifferent tailored zinc(II) and chromium(III) metalloporphyrins have been used as chromophores for the colourimetric detection of volatile amines. A new concept to increase the porphyrins absorbance change upon exposure to amines is introduced. Moreover, the novel porphyrins’ processability during the deposition process is increased by their enhanced solubility in non-polar solvents.rnrnThe porphyrin chromophores have successfully been incorporated into polysiloxane matrices on different substrates via a dielectric barrier discharge enhanced chemical vapour deposition. This process allows the use of nitrogen as a cheap and abundant plasma gas, produces minor amounts of waste and by-products and can be easily introduced into (existing) roll-to-roll production lines. The formed hybrid sensing layers tightly incorporate the porphyrins and moreover form a porous structure to facilitate the amines diffusion to and interaction with the chromophores.rnrnThe work is completed with the thorough analysis of the porphyrins’ amine sensing performance in solution as well as in the hybrid coatings . To reveal the underlying interaction mechanisms, the experimental results are supported by DFT calculations. The deposited layers could be used for the detection of NEt3 concentrations below 10 ppm in the gas phase. Moreover, the coated foils have been tested in preliminary food storage experiments. rnrnThe mechanistic investigations on the interaction of amines with chromium(III) porphyrins revealed a novel pathway to the formation of chromium(IV) oxido porphyrins. This has been used for electrochemical epoxidation reactions with dioxygen as the formal terminal oxidant.rn