Influence of habitat and climate change on European bird communities

Die Fragmentierung von Waldgebieten, der Verlust geeigneter Habitate, die Invasion exotischer Arten und globale Klimaveränderung haben auf Artengemeinschaften erhebliche Auswirkungen. Vögel dienen in vielen Fällen als Indikatorarten für Umweltveränderungen und, besonders, für Veränderungen im Zusammenhang mit globaler Erwärmung. In meiner Arbeit habe ich zuerst einen Literaturüberblick über die Auswirkungen globaler Klimaveränderung auf die Verbreitungsgebiete, den Artenreichtum und die Zusammensetzung von Vogelgemeinschaften dargestellt. Zahlreiche Untersuchungen zeigen, daß die Grenzen der Verbreitungsgebiete der meisten Vogelarten mit klimatischen Faktoren korrelieren. Verschiebungen der Verbreitungsgebiete in nördliche Richtung oder in höhere Regionen im Gebirge konnten bereits für viele temperate Vogelarten beobachtet werden. Weiterhin wurde ein zunehmender Artenreichtum besonders in nördlichen Breiten und in höheren Lagen für viele temperate Vogelgemeinschaften vorhergesagt. In trockenen Gebieten ist dagegen mit einer Abnahme des Artenreichtums zu rechnen. Im zweiten Teil meiner Arbeit habe ich untersucht, ob beobachtete Veränderungen in der Zusammensetzung europäischer Vogelgemeinschaften tatsächlich durch aktuelle Klimaveränderungen beeinflußt werden. Das Zugverhalten der Arten war dabei ein Schwerpunkt der Untersuchung, weil zu erwarten war, daß Vogelarten mit verschiedenem Zugverhalten unterschiedlich auf Klimaveränderungen reagieren. Ich habe ein Regressionsmodell genutzt, welches die räumliche Beziehung zwischen dem Anteil von Langstreckenziehern, Kurzstreckenziehern und Standvögeln in europäischen Vogelgemeinschaften und verschiedenen Klimavariablen beschreibt. Für 21 Gebiete in Europa habe ich Daten über beobachtete Veränderungen in der Struktur der Vogelgemeinschaften und isochrone Klimaveränderungen zusammengetragen. Mit Hilfe dieser Klimaveränderungen und dem räumlichen Regressionsmodell konnte ich berechnen, welche Veränderungen in den Vogelgemeinschaften aufgrund der veränderten Klimabedingungen zu erwarten wären und sie mit beobachteten Veränderungen vergleichen. Beobachtete und berechnete Veränderungen korrelierten signifikant miteinander. Die beobachteten Veränderungen konnten nicht durch räumliche Autokorrelationseffekte oder durch alternative Faktoren, wie z.B. Veränderungen in der Landnutzung, erklärt werden. Im dritten Teil der Arbeit untersuchte ich für eine mitteleuropäische Vogelgemeinschaft welchen Einfluß Habitatveränderungen, die Invasion exotischer Arten und die Klimaveränderung auf Veränderungen der Häufigkeit und Verbreitungsgröße der 159 Vogelarten am Bodensee zwischen 1980-1981 und 2000-2002 hatten. Dabei konnte gezeigt werden, daß Veränderungen in der regionalen Abundanz sowohl durch Habitatveränderungen als auch durch Klimavänderungen hervorgerufen wurden. Exotische Arten schienen in dieser Zeit keinen bedeutenden Einfluß zu haben. Besonders bei Agrarlandarten, Arten mit nördlicheren Verbreitungsgebieten und bei Langstreckenziehern konnten signifikante Abnahmen in der Abundanz beobachtet werden. Vor allem die anhaltenden negativen Bestandsveränderungen bei Langstreckenziehern und die in den letzten zehn Jahren aufgetretenen Abnahmen nördlicher verbreiteter Vogelarten deuten darauf hin, daß die Klimaveränderung aktuell als der größte Einfluß für Vögel in Europa angesehen werden muß. Insgesamt zeigen die Ergebnisse dieser Arbeit, daß sich der anhaltende Druck auf die Umwelt in erster Linie durch Habitat- und Klimaveränderungen manifestiert.

Polymer properties measured by micromechanical cantilever technique

Surface stress changes induced by specific adsorption of molecules were investigated using a micromechanical cantilever sensor (MCS) device. 16 MCS are grouped within four separate wells. Each well can be addressed independently by different liquid enabling functionalization of MCS separately by flowing different solutions through each well and performing sensing and reference experiments simultaneously. In addition, each well contains a fixed reference mirror, which allows measuring the absolute bending of MCS. The effect of the flow rate on the MCS bending change was found to be dependent on the absolute bending value of MCS. In addition, the signal from the reference mirror can be used to follow refractive index changes upon mixing different solutions. Finite element simulation of solution exchange in wells was compared with experiment results. Both revealed that one solution can be exchanged by another one after a total volume of 200 µl has flown through. Using MCS, the adsorption of thiolated deoxyribonucleic acid (DNA) molecules and 6-mercapto-1-hexanol (MCH) on gold surfaces, and the DNA hybridization were performed. The nanomechanical response is in agreement with data reported by Fritz et al.1 Thus, the multiwell device is readily applicable for sensing of multiple chemical and biological recognition events in a single step. In this context controlled release and uptake of drugs are currently widely discussed. As a model system, we have used polystyrene (PS) spheres with diameters in the order of µm. The swelling behavior of individual PS spheres in toluene vapor was studied via mass loading by means of micromechanical cantilever sensors. For 4–8% cross-linked PS a mass increase of 180% in saturated toluene vapor was measured. In addition, the diameter change in saturated toluene vapor was measured and the corresponding volume increase of 200% was calculated. The mass of the swollen PS sphere decreases with increasing exposure time to ultraviolet (UV) light. The swelling response is significantly different between the first and the second exposure to toluene vapor. This is attributed to the formation of a cross-linked shell at the surface of the PS spheres. Shape persistent parts were observed for locally UV irradiated PS spheres. These PS spheres were found to be fluorescent and cracks occur after exposure in toluene liquid. The diffusion time of dye molecules in PS spheres increases with increasing chemical cross-linking density. This concept of locally dissolving non cross-linked PS from the sphere was applied to fabricate donut structures on surfaces. Arrays of PS spheres were fabricated using spin coating. The donut structure was produced simply after liquid solvent rinsing. The complete cross-linking of PS spheres was found after long exposure time to UV. We found that stabilizers play a major role in the formation of the donut nanostructures.

Transport properties of YBa 2 Cu 3 O 7, PrBa 2 Cu 3 O 7-superlattices

The understanding of the coupling between superconducting YBa2Cu3O7 (YBCO) layers decoupled by non superconducting PrBa2Cu3O7 (PBCO) layers in c-axis oriented superlattices was the aim of this thesis. For this purpose two conceptually different kind of transport experiments have been performed. rnrnIn the first type of transport experiments the current is flowing parallel to the layers. Here the coupling is probed indirectly using magnetic vortex lines, which are penetrating the superlattice. Movement of the vortex segments in neighbouring YBCO layers is more or less coherent depending on the thickness of both the superconducting and non superconducting layers. This in-plane transport was measured either by sending an external current through bridges patterned in the superlattice or by an induced internal current. rnThe vortex-creep activation energy U was determined by analysis of the in-plane resistive transition in an external magnetic field B oriented along the c-axis. The activation energies for two series of superlattices were investigated. In one series the thickness of the YBCO layers was constant (nY=4 unit cells) and the number of the PBCO unit cells was varied, while in the other the number of PBCO layers was constant (nP=4) and nY varied. The correlation length of the vortex system was determined to be 80 nm along the c-axis direction. It was found that even a single PBCO unit cell in a superlattice effectively cuts the flux lines into shorter weakly coupled segments, and the coupling of the vortex systems in neighbouring layers is negligible already for a thickness of four unit cells of the PBCO layers. A characteristic variation of the activation energy for the two series of superlattices was found, where U0 is proportional to the YBCO thickness. A change in the variation of U0 with the current I in the specimen was observed, which can be explained in terms of a crossover in the vortex creep process, generated by the transport current. At low I values the dislocations mediated (plastic) vortex creep leads to thermally assisted flux-flow behaviour, whereas at high current the dc transport measurements are dominated by elastic (collective) creep.rnThe analysis of standard dc magnetization relaxation data obtained for a series superlattices revealed the occurrence of a crossover from elastic (collective) vortex creep at low temperature to plastic vortex creep at high T. The crossover is generated by the T dependent macroscopic currents induced in the sample. The existence of this creep crossover suggests that, compared with the well known Maley technique, the use of the normalized vortex creep activation energy is a better solution for the determination of vortex creep parameters.rnrnThe second type of transport experiments was to measure directly a possible Josephson coupling between superconducting CuO2 double planes in the superlattices by investigation of the transport properties perpendicular to the superconducting planes. Here three different experiments have been performed. The first one was to pattern mesa structures photolithographically as in previous works. The second used three-dimensional nanostructures cut by a focused ion beam. For the these two experiments insufficient patterning capabilities prevented an observation of the Josephson effect in the current voltage curves. rnA third experiment used a-axis and (110) oriented YBCO films, where in-plane patterning can in principle be sufficient to measure transport perpendicular to the superconducting planes. Therefore the deposition of films with this unusual growth orientation was optimized and investigated. The structural and microstructural evolution of c-axis to a-axis orientation was monitored using x-ray diffraction, scanning electron microscopy and magnetization measurements. Films with full a-axis alignment parallel to the substrate normal could be achieved on (100)SrTiO3. Due to the symmetry of the substrate the c-axis direction in-plane is twofold. Transferring the deposition conditions to films grown on (110)SrTiO3 allowed the growth of (110) oriented YBCO films with a unique in-plane c-axis orientation. While these films were of high quality by crystallographic and macroscopic visual inspection, electron microscopy revealed a coherent crack pattern on a nanoscale. Therefore the actual current path in the sample was not determined by the macroscopic patterning which prohibited investigations of the in-plane anisotropy in this case.rn