Geochronological and structural evolution of the western and central Kaoko Belt in NW Namibia

This thesis focusses on the tectonic evolution and geochronology of part of the Kaoko orogen, which is part of a network of Pan-African orogenic belts in NW Namibia. By combining geochemical, isotopic and structural analysis, the aim was to gain more information about how and when the Kaoko Belt formed. The first chapter gives a general overview of the studied area and the second one describes the basis of the Electron Probe Microanalysis dating method. The reworking of Palaeo- to Mesoproterozoic basement during the Pan-African orogeny as part of the assembly of West Gondwana is discussed in Chapter 3. In the study area, high-grade rocks occupy a large area, and the belt is marked by several large-scale structural discontinuities. The two major discontinuities, the Sesfontein Thrust (ST) and the Puros Shear Zone (PSZ), subdivide the orogen into three tectonic units: the Eastern Kaoko Zone (EKZ), the Central Kaoko Zone (CKZ) and the Western Kaoko Zone (WKZ). An important lineament, the Village Mylonite Zone (VMZ), has been identified in the WKZ. Since plutonic rocks play an important role in understanding the evolution of a mountain belt, zircons from granitoid gneisses were dated by conventional U-Pb, SHRIMP and Pb-Pb techniques to identify different age provinces. Four different age provinces were recognized within the Central and Western part of the belt, which occur in different structural positions. The VMZ seems to mark the limit between Pan-African granitic rocks east of the lineament and Palaeo- to Mesoproterozoic basement to the west. In Chapter 4 the tectonic processes are discussed that led to the Neoproterozoic architecture of the orogen. The data suggest that the Kaoko Belt experienced three main phases of deformation, D1-D3, during the Pan-African orogeny. Early structures in the central part of the study area indicate that the initial stage of collision was governed by underthrusting of the medium-grade Central Kaoko zone below the high-grade Western Kaoko zone, resulting in the development of an inverted metamorphic gradient. The early structures were overprinted by a second phase D2, which was associated with the development of the PSZ and extensive partial melting and intrusion of ~550 Ma granitic bodies in the high-grade WKZ. Transcurrent deformation continued during cooling of the entire belt, giving rise to the localized low-temperature VMZ that separates a segment of elevated Mesoproterozoic basement from the rest of the Western zone in which only Pan-African ages have so far been observed. The data suggest that the boundary between the Western and Central Kaoko zones represents a modified thrust zone, controlling the tectonic evolution of the Kaoko belt. The geodynamic evolution and the processes that generated this belt system are discussed in Chapter 5. Nd mean crustal residence ages of granitoid rocks permit subdivision of the belt into four provinces. Province I is characterised by mean crustal residence ages <1.7 Ga and is restricted to the Neoproterozoic granitoids. A wide range of initial Sr isotopic values (87Sr/86Sri = 0.7075 to 0.7225) suggests heterogeneous sources for these granitoids. The second province consists of Mesoproterozoic (1516-1448 Ma) and late Palaeo-proterozoic (1776-1701 Ma) rocks and is probably related to the Eburnian cycle with Nd model ages of 1.8-2.2 Ga. The eNd i values of these granitoids are around zero and suggest a predominantly juvenile source. Late Archaean and middle Palaeoproterozoic rocks with model ages of 2.5 to 2.8 Ga make up Province III in the central part of the belt and are distinct from two early Proterozoic samples taken near the PSZ which show even older TDM ages of ~3.3 Ga (Province IV). There is no clear geological evidence for the involvement of oceanic lithosphere in the formation of the Kaoko-Dom Feliciano orogen. Chapter 6 presents the results of isotopic analyses of garnet porphyroblasts from high-grade meta-igneous and metasedimentary rocks of the sillimanite-K-feldspar zone. Minimum P-T conditions for peak metamorphism were calculated at 731±10 °C at 6.7±1.2 kbar, substantially lower than those previously reported. A Sm-Nd garnet-whole rock errorchron obtained on a single meta-igneous rock yielded an unexpectedly old age of 692±13 Ma, which is interpreted as an inherited metamorphic age reflecting an early Pan-African granulite-facies event. The dated garnets survived a younger high-grade metamorphism that occurred between ca. 570 and 520 Ma and apparently maintained their old Sm-Nd isotopic systematics, implying that the closure temperature for garnet in this sample was higher than 730 °C. The metamorphic peak of the younger event was dated by electronmicroprobe on monazite at 567±5 Ma. From a regional viewpoint, it is possible that these granulites of igneous origin may be unrelated to the early Pan-African metamorphic evolution of the Kaoko Belt and may represent a previously unrecognised exotic terrane.

Jaw mechanics of the pterosaur skull construction and the evolution of toothlessness

In the present study, pterosaur skull constructions were analysed using a combined approach of finite element analysis (FEA), static investigations as well as applying classical beam theory and lever mechanics. The study concentrates on the operating regime „bite“, where loads are distributed via the dentition or a keratinous rhamphotheca into the skull during jaw occlusion. As a first step, pterosaur tooth constructions were analysed. The different morphologies of the tooth construction determine specific operational ranges, in which the teeth perform best (= greatest resistance against failure). The incomplete enamel-covering of the pterosaur tooth constructions thereby leads to a reduction of strain and stress and to a greater lateral elasticity than for a complete enamel cover. This permits the development of high and lateral compressed tooth constructions. Further stress-absorption occurs in the periodontal membrane, although its mechanical properties can not be clarified unambiguously. A three-dimensionally preserved skull of Anhanguera was chosen as a case-study for the investigation of the skull constructions. CT-scans were made to get information about the internal architecture, supplemented by thin-sections of a rostrum of a second Anhanguera specimen. These showed that the rostrum can be approximated as a double-walled triangular tube with a large central vacuity and an average wall-thickness of the bony layers of about 1 mm. On base of the CT-scans, a stereolithography of the skull of Anhanguera was made on which the jaw adductor and abductor muscles were modelled, permitting to determine muscular forces. The values were used for the lever mechanics, cantilever and space frame analysis. These studies and the FEA show, that the jaw reaction forces are critical for the stability of the skull construction. The large jugal area ventral to the orbita and the inclined occipital region act as buttresses against these loads. In contrast to the orbitotemporal region which is subject to varying loading conditions, the pattern in the rostrum is less complex. Here, mainly bending in dorsal direction and torsion occur. The hollow rostrum leads to a reduction of weight of the skull and to a high bending and torsional resistance. Similar to the Anhanguera skull construction, the skulls of those pterosaur taxa were analysed, from which enough skull material is know to permit a reliable reconstruction. Furthermore, FEA were made from five selected taxa. The comparison of the biomechanical behaviour of the different skull constructions results in major transformational processes: elongation of rostra, inclination of the occipital region, variation of tooth morphology, reduction of the dentition and replacement of teeth by a keratinous hook or rhamphotheca, fusion of naris and antorbital fenestra, and the development of bony and soft-tissue crests. These processes are discussed for their biomechanical effects during bite. Certain optional operational ranges for feeding are assigned to the different skull constructions and previous hypotheses (e.g. skimming) are verified. Using the principle of economisation, these processes help to establish irreversible transformations and to define possible evolutionary pathways. The resulting constructional levels and the structural variations within these levels are interpreted in light of a greater feeding efficiency and reduction of bony mass combined with an increased stability against the various loads. The biomechanical conclusive pathways are used for comparison and verification of recent hypothesis of the phylogenetic systematics of pterosaurs.

Anaerobic pathways in the Porifera: Strombine dehydrogenase, an opine dehydrogenase, from the sponge Suberites domuncula

The study presented here encompasses identification, analysis and characterization of the strombine dehydrogenase (StDH) from the sponge S. domuncula, on the gene and protein level. StDH is an opine dehydrogenase which is involved in opine production pathways found mainly in marine invertebrates. These anaerobic pathways are regarded as analogues to the classical anaerobic glycolytic pathway (lactate production pathway), which is predominant in vertebrates. The StDH was previously annotated as a tauropine dehydrogenase (TaDH) on the basis of its 68% identity with the TaDH protein from Halichondria japonica. Subsequent enzymatic assays showed that S. domuncula opine dehydrogenase is in fact strombine dehydrogenase which possesses specific characteristics not found in other proteins of the same family. It is described here for the first time the StDH gene in Eukaryotes. Two allelic variants have been identified which are present in the different specimens either as a homozygotic or a heterozygotic. Phylogenetic analyses supported with enzymatic assays indicate that S. domuncula StDH is only distantly related to the opine dehydrogenases from marine invertebrates. StDH showed that the protein is highly specific to glycine and inhibited by the substrate pyruvate. Furthermore, S. domunucla StDH has a dimeric structure (~75 kDa) which is not observed in so far described OpDHs that are monomeric proteins. This enzyme showed similarities to the OCD/mu-cristallyin protein family. Results showed that a sponge StDH is unusual enzyme that belongs to the independent enzyme class. In addition, expression studies revealed that the StDH is down-regulated with aeration. Immunohistology analyses showed high expression of the protein in almost all sponge cells. A strong accumulation of the enzyme was seen around the bacteria indicating that under aerobic conditions the bacteria might metabolize strombine (end product of the reaction). In conclusion, the data documented here shed new light on the anaerobic pathways in marine invertebrates. Potential mutual influences between bacteria and sponge are discussed as well. Hopefully, these results could have a small but important contribution to the better understanding of the evolution in the animal kingdom.

Systematics, phylogeny and biogeography of Cousinia (Asteraceae)

Die Systematik, Phylogenie und Biogeographie der Gattung Cousinia (Asteraceae, Cardueae) als größter Gattung der Tribus Cardueae mit mehr als 600 Arten wurde untersucht. Diese Dissertation umfasst drei Hauptteile: Im ersten Teil wurde die Phylogenie und Evolution des Arctium-Cousinia-Komplexes Untersucht. Dieser Gattungskomplex enthält Arctium, Cousinia, Hypacanthium und Schmalhausenia und zeigt die höchste Diversität in der Irano-Turanischen Region und in den Gebirgen Zentralasiens. Es wurden ITS und rpS4-trnT-trnL-Sequenzen für insgesamt 138 Arten generiert, darunter von 129 (von ca. 600) Arten von Cousinia. Wie in früheren Analysen bereits gefunden, ist Cousinia nicht monophyletisch. Stattdessen sind Cousinia subg. Cynaroides und subg. Hypacanthodes mit insgesamt ca. 30 Arten enger mit Arctium, Hypacanthium und Schmalhausenia (Arctioid Clade) als mit subg. Cousinia (Cousinioid Clade) verwandt. Die Arctioid und Cousiniod clades werden auch durch Pollenmorphologie und Chromosomenzahl unterstützt, wie bereits früher bekannt war. In dem Arctioid Clade entsprechen morphologische Gattungsgrenzen, basierend auf Blattform, Blattbedornung und Morphologie der Involukralblätter, nicht den in der molekularen analyse gefundenen clades. Es kann keine taxonomische Lösung für diesen Konflikt gefunden werden, und die gennanten Merkmale wurden als homoplastisch betrachtet. Obwohl die phylogenetische Auflösung in dem Cousinioid Clade schlecht ist, enthalten die ITS und rpS4-trnT-trnL-Sequenzen phylogenetische Information. So gruppierten z.B. die sechs annuellen Arten in zwei Gruppen. Schlechte phylogenetische Auflösung resultiert wahrscheinlich aus dem Mangel an Merkmalen und der großen Artenzahl in dieser artenreichen und vergleichsweise jungen (ca. 8,7 mya) Linie. Artbildung in dem Cousinioid Clade scheint hauptsächlich allopatrisch zu sein. Der zweite Teil der Dissertation untersucht die Rolle der Hybridisierung in der Evolution von Cousinia s.s. Die in der Vergangenheit publizierteten 28 Hybrid-Kombinationen und 11 Zwischenformen wurden kritisch geprüft, und zwei Hybridindividuen wurden morphologisch und molekular untersucht. Die vermutlichen oder nachgewiesenen Eltern der Hybriden und Zwischenformen wurden auf die aus einer Bayesischen Analyse der ITS-Sequenzen von 216 Arten von Cousinia und verwandten Gattungen resultierenden Phylogenie aufgetragen. Weder Hybriden zwischen dem Cousinioid Clade und anderen Haupt-Claden des Arctium-Cousinia-Komplexes noch zwischen annuellen und perennirenden Arten von Cousinia s.s. wurden beobachtet. Die Ergebnisse zeigen eindeutig, dass Hybridisierung in Cousinia möglich is, und dass ca. 10,7% der Arten an interspezifischer Hybridisierung beteiligt sind. Obwohl Hybridisierung in Cousinia s.s. stattfindet und zu den Schwierigkeiten bei der Rekonstruktion ihrer phylogenetischen Geschichte beitragen könnte, war ihre Rolle für die Entwicklung und Diversität der Gruppe offenbar gering. Im dritten Teil wird eine taxonomische Revision der C. sect. Cynaroideae präsentiert. Cousinia sect. Cynaroideae, die größte Sektion der Gattung mit 110 veröffentlichten Arten, zeichnet sich durch eine Chromosomenzahl von 2n = 24 und durch ± herablaufende Blätter und Hüllblätter mit Anhängseln aus. Sie kommt im Iran, Irak, dem Kaukasus, der Türkei, Turkmenistan, Afghanistan, Pakistan, dem Libanon und Anti-Libanon vor und hat ihre Hauptzentren der Artdiversität im westlichen und nordwestlichen Iran, im Irak und in der südöstlichen Türkei. Die Revision dieser Gruppe, hauptsächlich basierend auf der Untersuchung von ca. 2250 Herbarbögen, führte zu einer Verringerung der Artenzahl auf 31 Arten mit acht Unterarten. Alle Arten werden typifiziert und ausgeschlüsselt, und Beschreibungen, Abbildungen und Verbreitungskarten werden für jede Art angegeben.

Systematics, phylogeny and biogeography of Juncaginaceae

I investigated the systematics, phylogeny and biogeographical history of Juncaginaceae, a small family of the early-diverging monocot order Alismatales which comprises about 30 species of annual and perennial herbs. A wide range of methods from classical taxonomy to molecular systematic and biogeographic approaches was used. rnrnIn Chapter 1, a phylogenetic analysis of the family and members of Alismatales was conducted to clarify the circumscription of Juncaginaceae and intrafamilial relationships. For the first time, all accepted genera and those associated with the family in the past were analysed together. Phylogenetic analysis of three molecular markers (rbcL, matK, and atpA) showed that Juncaginaceae are not monophyletic. As a consequence the family is re-circumscribed to exclude Maundia which is pro-posed to belong to a separate family Maundiaceae, reducing Juncaginaceae to include Tetroncium, Cycnogeton and Triglochin. Tetroncium is weakly supported as sister to the rest of the family. The reinstated Cycnogeton (formerly included in Triglochin) is highly supported as sister to Triglochin s.str. Lilaea is nested within Triglochin s. str. and highly supported as sister to the T. bulbosa complex. The results of the molecular analysis are discussed in combination with morphological characters, a key to the genera of the family is given, and several new combinations are made.rnrnIn Chapter 2, phylogenetic relationships in Triglochin were investigated. A species-level phylogeny was constructed based on molecular data obtained from nuclear (ITS, internal transcribed spacer) and chloroplast sequence data (psbA-trnH, matK). Based on the phylogeny of the group, divergence times were estimated and ancestral distribution areas reconstructed. The monophyly of Triglochin is confirmed and relationships between the major lineages of the genus were resolved. A clade comprising the Mediterranean/African T. bulbosa complex and the American T. scilloides (= Lilaea s.) is sister to the rest of the genus which contains two main clades. In the first, the widespread T. striata is sister to a clade comprising annual Triglochin species from Australia. The second clade comprises T. palustris as sister to the T. maritima complex, of which the latter is further divided into a Eurasian and an American subclade. Diversification in Triglochin began in the Miocene or Oligocene, and most disjunctions in Triglochin were dated to the Miocene. Taxonomic diversity in some clades is strongly linked to habitat shifts and can not be observed in old but ecologically invariable lineages such as the non-monophyletic T. maritima.rnrnChapter 3 is a collaborative revision of the Triglochin bulbosa complex, a monophyletic group from the Mediterranean region and Africa. One new species, Triglochin buchenaui, and two new subspecies, T. bulbosa subsp. calcicola and subsp. quarcicola, from South Africa were described. Furthermore, two taxa were elevated to species rank and two reinstated. Altogether, seven species and four subspecies are recognised. An identification key, detailed descriptions and accounts of the ecology and distribution of the taxa are provided. An IUCN conservation status is proposed for each taxon.rnrnChapter 4 deals with the monotypic Tetroncium from southern South America. Tetroncium magellanicum is the only dioecious species in the family. The taxonomic history of the species is described, type material is traced, and a lectotype for the name is designated. Based on an extensive study of herbarium specimens and literature, a detailed description of the species and notes on its ecology and conservation status are provided. A detailed map showing the known distribution area of T. magellanicum is presented. rnrnIn Chapter 5, the flower structure of the rare Australian endemic Maundia triglochinoides (Maundiaceae, see Chapter 1) was studied in a collaborative project. As the morphology of Maundia is poorly known and some characters were described differently in the literature, inflorescences, flowers and fruits were studied using serial mictrotome sections and scanning electron microscopy. The phylogenetic placement, affinities to other taxa, and the evolution of certain characters are discussed. As Maundia exhibits a mosaic of characters of other families of tepaloid core Alismatales, its segregation as a separate family seems plausible.