Entwicklung neuer Biomarker zur Detektion von Umweltbelastung

Es wurde bis heute meist mit relativ aufwendigen Methoden nach dem Vorkommen von Strangbrüchen in der DNA gesucht. Die hier verwendete Fast-Micromethod steht jetzt neben mehreren bereits etablierten Methoden zur qualitativen und quantitativen Erfassung von DNA-Strangbrüchen zur Verfügung. Die Methode wurde zur schnellen und empfindlichen Messung von DNA-Schäden und deren Reparatur unter Verwendung von PicoGreen, einem spezifisch an DNA-Einzelstränge bindenden Fluoreszenzfarbstoff, durchgeführt. Die Methode wurde in der vorliegenden Arbeit für verschiedene Zellarten wie HeLa-Zellen und Schwamm-Zellen mit Schwermetallionen verwendet. Sie wurde ebenfalls bei verschiedenen Strangbruch-induzierenden Stoffen wie NQO und physikalischen Faktoren wie UV-Bestrahlung und Gammastrahlung erfolgreich eingesetzt. Die Strangbrüche wurden bei HeLa-Zellen mit 10 µM NQO nach 90 Minuten Inkubation und ebenso bei Gammastrahlung mit 16 Gy gemessen. An Schwammzellen wurden Effekte von Schwermetallionen und UV, auch einschließlich nachgeschalteter Reparaturaktivität, gemessen. Dabei war die Reparatur jedoch nicht ganz vollständig. Durch die Fast-Micromethod wurde DNA-Schädigung durch UV-Bestrahlung und Gentoxizität von Schwermetall-Ionen an HeLa-Zellen nachgewiesen. Die Schwammzellen wurden mit verschiedenen Schwermetall-Ionen in verschiedenen Konzentrationen getestet und mit UV bei verschiedenen Dosen bestrahlt. Teilweise wurde nach dem Einfluss die DNA-Reparatur erfasst. Schwammzellen wurden in den drei häufig verwendeten Medien CMFSW, CMFSW+EDTA und Seewasser aufgenommen. Im Seewasser waren die Zellen nach 60 Minuten Inkubationszeit aggregiert (Primmorphe). Im CMFSW+EDTA Medium lagen dagegen nur Einzellen vor, da die Zellen im EDTA-Medium dissoziiert wurden und auch nicht mehr proliferierten.

Grating coupled surface plasmon enhanced fluorescence spectroscopy

Over the last three decades, sensors based on the phenomenon of surface plasmon resonance have proven particularly suitable for real time thin film characterization, gas detection, biomolecular interaction examination and to supplement electrochemical methods. Systems based on prism coupling have been combined with fluorescence detection under the name of surface plasmon fluorescence spectroscopy to increase sensitivity even further. Alternatively, metal gratings can be employed to match photons for plasmon resonance. The real time monitoring of binding reactions not yet been reported in the combination of fluorescence detection and grating coupling. Grating-based systems promise more competitive products, because of reduced operating costs, and offer benefits for device engineering. This thesis is comprised of a comprehensive study of the suitability of grating coupling for fluorescence based analyte detection. Fundamental properties of grating coupled surface plasmon fluorescence spectroscopy are described, as well as issues related to the commercial realization of the method. Several new experimental techniques are introduced and demonstrated in order to optimize performance in certain areas and improve upon capabilities in respect to prism-based systems. Holographically fabricated gratings are characterized by atomic force microscopy and optical methods, aided by simulations and profile parameters responsible for efficient coupling are analyzed. The directional emission of fluorophores immobilized on a grating surface is studied in detail, including the magnitude and geometry of the fluorescence emission pattern for different grating constants and polarizations. Additionally, the separation between the minimum of the reflected intensity and the maximum fluorescence excitation position is examined. One of the key requirements for the commercial feasibility of grating coupling is the cheap and faithful mass production of disposable samples from a given master grating. The replication of gratings is demonstrated by a simple hot embossing method with good reproducibility to address this matter. The in-situ fluorescence detection of analyte immobilization and affinity measurements using grating coupling are described for the first time. The physical factors related to the sensitivity of the technique are assessed and the lower limit of detection of the technique is determined for an exemplary assay. Particular attention is paid to the contribution of bulk fluorophores to the total signal in terms of magnitude and polarization of incident and emitted light. Emission from the bulk can be a limiting factor for experiments with certain assay formats. For that reason, a novel optical method, based on the modulation of both polarization and intensity of the incident beam, is introduced and demonstrated to be capable of eliminating this contribution.

Synthesis and application of stimuli responsive tunable systems based on physical interactions

Novel single step synthetic procedure for hydrophobically modified alkali soluble latexes (HASE) via a miniemulsion-analogous method is presented. This facile method simplifies the copolymerization of the monomers with basically “opposite” character in terms of their hydrophilic/hydrophobic nature, which represent one of the main challenges in water based systems. Considered systems do not represent classical miniemulsions due to a high content of water soluble monomers. However, the polymerization mechanism was found to be rather similar to miniemulsion polymerization process.rnThe influence of the different factors on the system stability has been investigated. The copolymerization behavior studies typically showed strong composition drifts during copolymerization. It was found that the copolymer composition drift can be suppressed via changing the initial monomer ratio.rnThe neutralization behavior of the obtained HASE systems was investigated via potentiometric titration. The rheological behavior of the obtained systems as a function of the different parameters, such as pH, composition (ultrahydrophobe content) and additive type and content has also been investigated.rnDetailed investigation of the storage and loss moduli, damping factor and the crossover frequencies of the samples showed that at the initial stages of the neutralization the systems show microgel-like behavior.rnThe dependence of the rheological properties on the content and the type of the ultrahydrophobe showed that the tuning of the mechanical properties can be easily achieved via minor (few percent) but significant changes in the content of the latter. Besides, changing the hydrophobicity of the ultrahydrophobe via increasing the carbon chain length represents another simple method for achieving the same results.rnThe influence of amphiphilic additives (especially alcohols) on the rheological behavior of the obtained systems has been studied. An analogy was made between micellation of surfactants and the formation of hydrophobic domains between hydrophobic groups of the polymer side chain.rnDilution induced viscosity reduction was investigated in different systems, without or with different amounts or types of the amphiphilic additive. Possibility of the controlled response to dilution was explored. It was concluded that the sensitivity towards dilution can be reduced, and in extreme cases even the increase of the dynamic modulus can be observed, which is of high importance for the setting behavior of the adhesive material.rnIn the last part of this work, the adhesive behavior of the obtained HASE systems was investigated on different substrates (polypropylene and glass) for the standard labeling paper. Wet tack and setting behavior was studied and the trends for possible applications have been evaluated.rnThe novel synthetic procedure, investigation of rheological properties and the possibility of the tuning via additives, investigated in this work create a firm background for the development of the HASE based adhesives as well as rheology modifiers with vast variety of possible applications due to ease of tuning the mechanical and rheological properties of the systems.