Inverse size exclusion chromatography (ISEC)

In this work, an improved protocol for inverse size-exclusion chromatography (ISEC) was established to assess important pore structural data of porous silicas as stationary phases in packed chromatographic columns. After the validity of the values generated by ISEC was checked by comparison with data obtained from traditional methods like nitrogen sorption at 77 K (Study A), the method could be successfully employed as valuable tool at the development of bonded poly(methacrylate)-coated silicas, while traditional methods generate partially incorrect pore structural information (Study B). Study A: Different mesoporous silicas were converted by a pseudomorphical transition into ordered MCM-41-type silica while maintaining the particle-size and -shape. The essential parameters like specific surface area, average pore diameter and specific pore volume, the pore connectivity from ISEC remained nearly the same which was reflected by the same course of the theoretical plate height vs. linear velocity curves. Study B: In the development of bonded poly(methacrylate)-coated silicas for the reversed phase separation of biopolymers, ISEC was the only method to generate valid pore structural information of the polymer-coated materials. Synthesis procedures were developed to obtain reproducibly covalently bonded poly(methacrylate) coatings with good thermal stability on different base materials, employing as well particulate and monolithic materials.

Magnetic properties of selected 3d- and 4f-systems on alpha-Al 2 O 3 substrates

In this work the growth and the magnetic properties of the transition metals molybdenum, niobium, and iron and of the highly-magnetostrictive C15 Laves phases of the RFe2 compounds (R: Rare earth metals: here Tb, Dy, and Tb{0.3}Dy{0.7} deposited on alpha-Al2O3 (sapphire) substrates are analyzed. Next to (11-20) (a-plane) oriented sapphire substrates mainly (10-10) (m-plane) oriented substrates were used. These show a pronounced facetting after high temperature annealing in air. Atomic force microscopy (AFM) measurements reveal a dependence of the height, width, and angle of the facets with the annealing temperature. The observed deviations of the facet angles with respect to the theoretical values of the sapphire (10-1-2) and (10-11) surfaces are explained by cross section high resolution transmission electron microscopy (HR-TEM) measurements. These show the plain formation of the (10-11) surface while the second, energy reduced (10-1-2) facet has a curved shape given by atomic steps of (10-1-2) layers and is formed completely solely at the facet ridges and valleys. Thin films of Mo and Nb, respectively, deposited by means of molecular beam epitaxy (MBE) reveal a non-twinned, (211)-oriented epitaxial growth as well on non-faceted as on faceted sapphire m-plane, as was shown by X-Ray and TEM evaluations. In the case of faceted sapphire the two bcc crystals overgrow the facets homogeneously. Here, the bcc (111) surface is nearly parallel to the sapphire (10-11) facet and the Mo/Nb (100) surface is nearly parallel to the sapphire (10-1-2) surface. (211)-oriented Nb templates on sapphire m-plane can be used for the non-twinned, (211)-oriented growth of RFe2 films by means of MBE. Again, the quality of the RFe2 films grown on faceted sapphire is almost equal to films on the non-faceted substrate. For comparison thin RFe2 films of the established (110) and (111) orientation were prepared. Magnetic and magnetoelastic measurements performed in a self designed setup reveal a high quality of the samples. No difference between samples with undulated and flat morphology can be observed. In addition to the preparation of covering, undulating thin films on faceted sapphire m-plane nanoscopic structures of Nb and Fe were prepared by shallow incidence MBE. The formation of the nanostructures can be explained by a shadowing of the atomic beam due to the facets in addition to de-wetting effects of the metals on the heated sapphire surface. Accordingly, the nanostructures form at the facet ridges and overgrow them. The morphology of the structures can be varied by deposition conditions as was shown for Fe. The shape of the structures vary from pearl-necklet strung spherical nanodots with a diameter of a few 10 nm to oval nanodots of a few 100 nm length to continuous nanowires. Magnetization measurements reveal uniaxial magnetic anisotropy with the easy axis of magnetization parallel to the facet ridges. The shape of the hysteresis is depending on the morphology of the structures. The magnetization reversal processes of the spherical and oval nanodots were simulated by micromagnetic modelling and can be explained by the formation of magnetic vortices.

Phylogeny of Western Palaearctic long-eared bats (Mammalia, Chiroptera, Plecotus) - a molecular perspective

Die Phylogenie der Westpaläarktischen Langohren (Mammalia, Chiroptera, Plecotus) – eine molekulare Analyse Die Langohren stellen eine Fledermausgattung dar, die fast alle westpaläarktischen Habitate bist zum Polarkreis hin besiedeln und in vielerlei Hinsicht rätselhaft sind. In der Vergangenheit wurden zahlreiche Formen und Varietäten beschrieben. Trotzdem galt für lange Zeit, dass nur zwei Arten in Europa anerkannt wurden. Weitere Arten waren aus Nordafrika, den Kanaren und Asien bekannt, aber auch deren Artstatus wurde vielfach in Frage gestellt. In der vorliegenden Dissertation habe ich mittels molekularer Daten,der partiellen Sequenzierung mitochondrialer Gene (16S rRNA und ND1), sowie der mitochondrialen Kontrollregion, eine molekular Analyse der phylogenetischen Verwandtschaftsverhältnisse innerhalb und zwischen den Linien der westpaläarktischen Langohren durchgeführt. Die besten Substitutionsmodelle wurden berechnet und phylogenetische Bäume mit Hilfe vier verschiedener Methoden konstruiert: dem neighbor joining Verfahren (NJ), dem maximum likelihood Verfahren (ML), dem maximum parsimony Verfahren (MP) und dem Bayesian Verfahren. Sechs Linien der Langohren sind genetisch auf einem Artniveau differenziert: Plecotus auritus, P. austriacus, P. balensis, P. christii, P. sardus, und P. macrobullaris. Im Falle der Arten P. teneriffae, P. kolombatovici und P. begognae ist die alleinige Interpretation der genetischen Daten einzelner mitochondrialer Gene für eine Festlegung des taxonomischen Ranges nicht ausreichend. Ich beschreibe in dieser Dissertation drei neue Taxa: Plecotus sardus, P. kolombatovici gaisleri (=Plecotus teneriffae gaisleri, Benda et al. 2004) and P. macrobullaris alpinus [=Plecotus alpinus, Kiefer & Veith 2002). Morphologische Kennzeichen, insbesondere für die Erkennung im Feld, werden hier dargestellt. Drei der sieben Arten sind polytypisch: P. auritus (eine west- und ein osteuropäische Linie, eine sardische Linie und eine aktuell entdeckte kaukasische Linie, Plecotus kolombatovici (P. k. kolombatovici, P. k. gaisleri und P. k. ssp.) und P. macrobullaris (P. m. macrobullaris und P. m. alpinus). Die Verbreitungsgebiete der meisten Arten werden in dieser Arbeit erstmals ausschließlich anhand genetisch zugeordneter Tiere dargestellt.Die Untersuchung der ökologischen Einnischung der nun anerkannten Formen, insbesondere in Gebieten sympatrischer Verbreitung, bietet ein spannendes und lohnendes Feld für zukünftige Forschungen. Nicht zuletzt muss sich die Entdeckung eines beachtlichen Anteils kryptischer Diversität innerhalb der westpaläarktischen Langohren auch bei der Entwicklung spezieller Artenschutzkonzepte widerspiegeln.

Electronic transport in the heavy fermion superconductors UPd 2 Al 3 and UNi 2 Al 3

This work addresses the electronical properties of the superconductors UPd2Al3 and UNi2Al3 on the basis of thin film experiments. These isotructural compounds are ideal candiates to study the interplay of magnetism and superconductivity due to the differences of their magnetically ordered states, as well as the experimental evidence for a magnetic pairing mechanism in UPd2Al3. Epitaxial thin film samples of UPd2Al3 and UNi2Al3 were prepared using UHV Molecular Beam Epitaxy (MBE). For UPd2Al3, the change of the growth direction from the intrinsic (001) to epitaxial (100) was predicted and sucessfully demonstrated using LaAlO3 substrates cut in (110) direction. With optimized deposition process parameters for UPd2Al3 (100) on LaAlO3 (110) superconducting samples with critical temperatures up to Tc = 1.75K were obtained. UPd2Al3-AlOx-Ag mesa junctions with superconducting base electrode were prepared and shown to be in the tunneling regime. However, no signatures of a superconducting density of states were observed in the tunneling spectra. The resistive superconducting transition was probed for a possible dependence on the current direction. In contrast to UNi2Al3, the existence of such feature was excluded in UPd2Al3 (100) thin films. The second focus of this work is the dependence of the resisitive transition in UNi2Al3 (100) thin films on the current direction. The experimental fact that the resisitive transition occurs at slightly higher temperatures for I║a than for I║c can be explained within a model of two weakly coupled superconducting bands. Evidence is presented for the key assumption of the two-band model, namely that transport in and out of the ab-plane is generated on different, weakly coupled parts of the Fermi surface. Main indications are the angle dependence of the superconducting transition and the dependence of the upper critical field Bc2 on current and field orientation. Additionally, several possible alternative explanations for the directional splitting of the transition are excluded in this work. An origin due to scattering on crystal defects or impurities is ruled out, likewise a relation to ohmic heating or vortex dynamics. The shift of the transition temperature as function of the current density was found to behave as predicted by the Ginzburg-Landau theory for critical current depairing, which plays a significant role in the two-band model. In conclusion, the directional splitting of the resisitive transition has to be regarded an intrinsic and unique property of UNi2Al3 up to now. Therefore, UNi2Al3 is proposed as a role model for weakly coupled multiband superconductivity. Magnetoresistance in the normalconducting state was measured for UPd2Al3 and UNi2Al3. For UNi2Al3, a negative contribution was observed close to the antiferromagnetic ordering temperature TN only for I║a, which can be associated to reduced spin-disorder scattering. In agreement with previous results it is concluded that the magnetic moments have to be attributed to the same part of the Fermi surface which generates transport in the ab-plane.

Unconventional superconductivity of the heavy fermion compound UNi 2 Al 3

The heavy fermion compound UNi2Al3 exhibits the coexistence of superconductivity and magnetic order at low temperatures, stimulating speculations about possible exotic Cooper-pairing interaction in this superconductor. However, the preparation of good quality bulk single crystals of UNi2Al3 has proven to be a non-trivial task due to metallurgical problems, which result in the formation of an UAl2 impurity phase and hence a strongly reduced sample purity. The present work concentrates on the preparation, characterization and electronic properties investigation of UNi2Al3 single crystalline thin film samples. The preparation of thin films was accomplished in a molecular beam epitaxy (MBE) system. (100)-oriented epitaxial thin films of UNi2Al3 were grown on single crystalline YAlO3 substrates cut in (010)- or (112)-direction. The high crystallographic quality of the samples was proved by several characterisation methods, such as X-ray analysis, RHEED and TEM. To study the magnetic structure of epitaxial thin films resonant magnetic x-ray scattering was employed. The magnetic order of thin the film samples, the formation of magnetic domains with different moment directions, and the magnetic correlation length were discussed. The electronic properties of the UNi2Al3 thin films in the normal and superconducting states were investigated by means of transport measurements. A pronounced anisotropy of the temperature dependent resistivity ρ(T) was observed. Moreover, it was found that the temperature of the resistive superconducting transition depends on the current direction, providing evidence for multiband superconductivity in UNi2Al3. The initial slope of the upper critical field H′c2(T) of the thin film samples suggests an unconventional spin-singlet superconducting state, as opposed to bulk single crystal data. To probe the superconducting gap of UNi2Al3 directly by means of tunnelling spectroscopy many planar junctions of different design employing different techniques were prepared. Despite the tunneling regime of the junctions, no features of the superconducting density of state of UNi2Al3 were ever observed. It is assumed that the absence of UNi2Al3 gap features in the tunneling spectra was caused by imperfections of the tunnelling contacts. The superconductivity of UNi2Al3 was probably suppressed just in a degraded surface layer, resulting in tunneling into non superconducting UNi2Al3. However, alternative explanations such as intrinsic pair breaking effects at the interface to the barrier are also possible.

Higher-order molecular properties and excitation energies in single-reference and multireference coupled-cluster theory

Coupled-cluster (CC) theory is one of the most successful approaches in high-accuracy quantum chemistry. The present thesis makes a number of contributions to the determination of molecular properties and excitation energies within the CC framework. The multireference CC (MRCC) method proposed by Mukherjee and coworkers (Mk-MRCC) has been benchmarked within the singles and doubles approximation (Mk-MRCCSD) for molecular equilibrium structures. It is demonstrated that Mk-MRCCSD yields reliable results for multireference cases where single-reference CC methods fail. At the same time, the present work also illustrates that Mk-MRCC still suffers from a number of theoretical problems and sometimes gives rise to results of unsatisfactory accuracy. To determine polarizability tensors and excitation spectra in the MRCC framework, the Mk-MRCC linear-response function has been derived together with the corresponding linear-response equations. Pilot applications show that Mk-MRCC linear-response theory suffers from a severe problem when applied to the calculation of dynamic properties and excitation energies: The Mk-MRCC sufficiency conditions give rise to a redundancy in the Mk-MRCC Jacobian matrix, which entails an artificial splitting of certain excited states. This finding has established a new paradigm in MRCC theory, namely that a convincing method should not only yield accurate energies, but ought to allow for the reliable calculation of dynamic properties as well. In the context of single-reference CC theory, an analytic expression for the dipole Hessian matrix, a third-order quantity relevant to infrared spectroscopy, has been derived and implemented within the CC singles and doubles approximation. The advantages of analytic derivatives over numerical differentiation schemes are demonstrated in some pilot applications.

Molecular genetic investigation of the Neolithic population history in the western Carpathian Basin

Der Fokus dieser Dissertation ist die populationsgenetische Analyse der neolithischen Bevölkerungswechsel in den 6.-5. Jahrtausende vor Christus, die im westlichen Karpatenbecken stattfanden. Die Zielsetzung der Studie war, mittels der Analyse von mitochondrialer und Y-chromosomaler aDNA, den Genpool der sechs neolithischen und kupferzeitlichen Populationen zu untersuchen und die daraus resultierenden Ergebnisse mit anderen prähistorischen und modernen genetischen Daten zu vergleichen.rnInsgesamt wurden 323 Individuen aus 32 ungarischen, kroatischen und slowakischen Fundplätzen beprobt und bearbeitet in den archäogenetischen Laboren der Johannes Gutenberg-Universität in Mainz. Die DNA Ergebnisse wurden mit verschiedenen populationsgenetischen Methoden ausgewertet. Vergleichsdaten von prähistorischen und modernen eurasiatischen Populationen wurden dazu gesammelt.rnDie HVS-I Region der mitochondrialen DNA konnten bei 256 Individuen reproduziert und authentifiziert werden (mit einer Erfolgsrate von 85.9%). Die Typisierung der HVS-II Region war in 80 Fällen erfolgreich. Testend alle gut erhaltene Proben, die Y-chromosomale Haplogruppe konnte in 33 männlichen Individuen typisiert werden.rnDie neolithischen, mitochondrialen Haplogruppen deuten auf eine hohe Variabilität des maternalen Genpools hin. Sowohl die mitochondrialen als auch die Y-chromosomalen Daten lassen Rückschlüsse auf eine nah-östliche bzw. südwestasiatische Herkunft der frühen Bauern zu. Die Starčevo- und linearbandkermaischen-Populationen in westlichem Karpatenbecken (letztere abgekürzt als LBKT) und die linearbandkermaischen-Population in Mitteleuropa (LBK) haben so starke genetische Ähnlichkeit, dass die Verbreitung der LBK nach Mitteleuropa mit vorangegangenen Wanderungsereignissen zu erklären ist. Die Transdanubische aDNA Daten zeigen hohe Affinität zu den publizierten prähistorischen aDNA Datensätzen von Mitteleuropa aus den 6.-4. Jahrtausende vor Chr. Die maternal-genetische Variabilität der Starčevo-Population konnte auch innerhalb der nachfolgenden Populationen Transdanubiens festgestellt werden. Nur kleinere Infiltrationen und Immigrationsereignissen konnten während der Vinča-, LBKT-, Sopot- und Balaton-Lasinja-Kultur in Transdanubien identifiziert werden. Zwischen den transdanubischen Regionen konnten mögliche genetische Unterschiede nur in der LBKT und in der Lengyel-Periode beobachtet werden, als sich die nördlichen Gruppen von den südlichen Populationen trennten. rnDie festgestellte Heterogenität der mtDNA in Zusammenhang mit der Y-chromosomalen Homogenität in den Starčevo- und LBK-Populationen, weisen auf patrilokale Residenzregeln und patrilineare Abstammungsregeln in den ersten Bauergemeinschaften hin. rnObwohl die hier präsentierten Daten einen großen Fortschritt in der Forschung von aDNA und Neolithikum des Karpatenbeckens und Mitteleuropas bedeuten, werfen sie auch mehrere Fragen auf, deren Beantwortung durch zukünftige Genomforschungen erbracht werden könnte.