Investigation of different shellac grades and improvement of release from air suspension coated pellets

Shellac is the purified product of the natural polymer Lac. Shellac types, from different origins and with different ages, all purified by the solvent extraction process were compared in this study. Their physicochemical properties acid value, glass transition temperatures, color numbers and molecular sizes were determined. Metoprolol tartrate pellets were coated by air suspension coating with these different grades of shellac. Two coating levels 20% w/w and 25% w/w were applied and then subjected to in vitro dissolution testing. Enteric resistance was achieved for all tested brands for the two coating levels. At pH 6.8, 7.2 and 7.4, significant variations were obvious between the brands. rnMoreover the molecular size of shellac has a pronounced effect in that shellac types with larger molecular size show a higher and faster release than others, while the one with the smaller molecular size show the opposite effect on the release of metoprolol.rnIn this study commercially available ready for use aqueous shellac solutions (SSB AQUAGOLD), which are based on shellac SSB 57 (Dewaxed Orange Shellac, Bysakhi-Ber type refined in a solvent extraction process), with different manufacturing dates were used. rnTo improve the enteric coating properties of films from aqueous shellac solutions, different aqueous polymeric solutions of hydroxypropyl methylcellulose (HPMC), hydroxypropyl cellulose (HPC), carboyxmethyl cellulose (CMC), gum arabic and polysaccharides (Pullulan®) were used. These water soluble polymers will act as pore formers to enhance drug release from pellets coated with the combination of shellac and these polymers. The influence of these polymers on the gloss of the shellac films, mechanical properties of the films and drug release from metoprolol tartrate pellets were studied.rnThe potential of ethanol to alter the rate of drug release from shellac coated pellets was assessed by using a modified in vitro dose dumping in alcohol (DDA) method and the test concluded that shellac coated dosage forms can be co-administered with alcohol beverages containing ≤ 5% with no effect of alcohol on the shellac coat.rnPellets coated with shellac sodium salts, showed higher release rates than pellets coated with shellac as ammonium salt forms. rn

Intrazelluläre Lokalisation und synaptische Ausschüttung der Neurotrophine in hippokampalen Neuronen und die Bedeutung von BDNF bei hippokampaler synaptischer Plastizität

Die Mitglieder der Neurotrophin-Familie (NGF, BDNF, NT-3 und NT-4) sind sekretierte Neuropeptide, die eine bedeutende Rolle bei der Entwicklung von Nervenzellen und bei der Modulation der synaptischen Transmission spielen. Wenngleich eine aktivitätsabhängige Sekretion von BDNF bereits gezeigt werden konnte, wurden die subzelluläre Expression und die Ausschüttung der anderen Neurotrophine bislang nur unzureichend charakterisiert. Um die Expression und die Ausschüttung aller Neurotrophine unter identischen Bedingungen untersuchen zu können, wurde in der vorliegenden Arbeit das Expressionsmuster und die synaptische Ausschüttung GFP-markierter Neurotrophine in dissoziierten hippokampalen Neuronen mit Hilfe der konfokalen Fluoreszenz-Videomikroskopie zeitaufgelöst untersucht. Zwei Phänotypen konnten unterschieden werden: der distale vesikuläre Expressionstyp mit Neurotrophin-beinhaltenden Vesikeln in distalen Neuriten, und der proximale Expressionstyp mit einer diffusen Neurotrophin-Verteilung in den Neuriten und Neurotrophin-beinhaltenden Vesikeln im Soma des Neurons und in den proximalen Dendriten. Der distale vesikuläre Phänotyp entsprach einer Verteilung des entsprechenden Neurotrophins in die sekretorischen Granula des aktivitätsabhängigen Sekretionsweges, während der proximale Phänotyp den Transport eines Neurotrophins in den konstitutiven Sekretionsweg widerspiegelte. Alle Neurotrophine erreichten in hippokampalen Neuronen prinzipiell beide Sekretionswege. Jedoch gelangten BDNF und NT-3 mit einer größeren Effizienz in den regulierten Sekretionsweg als NT-4 und NGF (BDNF: in 98% aller Zellen, NT-3: 85%, NT-4: 23% und NGF: 46%). Neurotrophine besitzen, wie es für sekretorische Peptide üblich ist, eine Vorläufersequenz, die während der Reifung des Proteins proteolytisch abgespalten wird. Die Fusion dieser Präpro-Sequenz von BDNF mit der Sequenz des maturen NT-4 bewirkte einen effizienteren Transport von NT-4 in die sekretorischen Granula des regulierten Sekretionsweges, und zeigte die große Bedeutung der Präpro-Sequenz für das zelluläre Verteilungsmuster von Neurotrophinen. In Neuronen, in denen die Neurotrophine in den regulierten Sekretionsweg transportiert wurden, konnte eine aktivitätsabhängige Sekretion der Neurotrophine an postsynaptische Strukturen glutamaterger Synapsen beobachtet werden. Die aktivitätsabhängige postsynaptische Ausschüttung der Neurotrophine zeigte eine Heterogenität in der Kinetik der Sekretion (exponentieller Abfall des Neurotrophin-Signals mit Zeitkonstanten von tau = 121 bis 307s). Die Präinkubtion mit dem Protonen-Ionophor Monensin, welcher die Neutralisation des intragranulären pH-Wertes und somit die Solubilisierung der dicht gepackten Proteinstrukturen in den Vesikeln erzwingt, erhöhte die Geschwindigkeit der Neurotrophin-Ausschüttung auf den Wert des unter physiologischen Bedingungen schnellsten Neurotrophins NT-4. Dennoch blieb die Geschwindigkeit der Neurotrophin-Ausschüttung im Vergleich zur Neurotransmitter-Ausschüttung langsam (tau = 13 ± 2 s). Diese Daten belegen eindeutig, dass die Neutralisation der sekretorischen Granula die Geschwindigkeit der Neurotrophin-Ausschüttung kritisch determiniert und die Geschwindigkeit der Neurotrophin-Ausschüttung im Vergleich zur konventionellen Neurotransmitter-Ausschüttung langsam erfolgt. Des Weiteren konnte gezeigt werden, dass das Neurotrophin BDNF effizient in distale vesikuläre Strukturen von CA1 Pyramidenzellen organotypischer Schnittkulturen des Hippokampus sortiert wird. Die basalen elektrischen Eigenschaften von CA1 Pyramidenzellen BDNF-defizienter Mäuse sind vergleichbar zu den Eigenschaften von Wildtyp Mäusen. Sowohl das Eigenpotential der CA1 Pyramidenzellen, die Form der Aktionspotentiale als auch die evozierten Antworten der CA1 Pyramdenzellen auf eine gepaarte präsynaptische Stimulation der Schaffer-Kollateralen zeigten bei BDNF-/- -, BDNF+/- - und BDNF+/+ -Mäusen keine signifikanten Unterschiede. Die Fähigkeit der CA1 Pyramidenzellen auf eine hochfrequente Reizung mit einer Langzeitpotenzierung (LTP) der postsynaptischen Ströme zu reagieren ist jedoch bei den BDNF-defizienten Mäusen beinträchtigt. Eine verminderte Induktion von LTP war in den BDNF-defizienten Mäusen nach tetanischer Stimulation der präsynaptischen Schaffer-Kollateralen und simultaner postsynaptischer Depolarisation der CA1 Pyramidenzelle zu beobachten.

The release of zinc and lead from mine tailings

Mining and processing of metal ores are important causes of soil and groundwater contamination in many regions worldwide. Metal contaminations are a serious risk for the environment and human health. The assessment of metal contaminations in the soil is therefore an important task. A common approach to assess the environmental risk emanating from inorganic contaminations to soil and groundwater is the use of batch or column leaching tests. In this regard, the suitability of leaching tests is a controversial issue. In the first part of this work the applicability and comparability of common leaching tests in the scope of groundwater risk assessment of inorganic contamination is reviewed and critically discussed. Soil water sampling methods (the suction cup method and centrifugation) are addressed as an alternative to leaching tests. Reasons for limitations of the comparability of leaching test results are exposed and recommendations are given for the expedient application of leaching tests for groundwater risk assessment. Leaching tests are usually carried out in open contact with the atmosphere disregarding possible changes of redox conditions. This can affect the original metal speciation and distribution, particularly when anoxic samples are investigated. The influence of sample storage on leaching test results of sulfide bearing anoxic material from a former flotation dump is investigated in a long-term study. Since the oxidation of the sulfide-bearing samples leads to a significant overestimation of metal release, a feasible modification for the conduction of common leaching tests for anoxic material is proposed, where oxidation is prevented efficiently. A comparison of leaching test results to soil water analyzes have shown that the modified saturation soil extraction (SSE) is found to be the only of the tested leaching procedures, which can be recommended for the assessment of current soil water concentrations at anoxic sites if direct investigation of the soil water is impossible due to technical reasons. The vertical distribution and speciation of Zn and Pb in the flotation residues as well as metal concentrations in soil water and plants were investigated to evaluate the environmental risk arising from this site due to the release of metals. The variations in pH and inorganic C content show an acidification of the topsoil with pH values down to 5.5 in the soil and a soil water pH of 6 in 1 m depth. This is due to the oxidation of sulfides and depletion in carbonates. In the anoxic subsoil pH conditions are still neutral and soil water collected with suction cups is in equilibrium with carbonate minerals. Results from extended x-ray absorption fine-structure (EXAFS) spectroscopy confirm that Zn is mainly bound in sphalerite in the subsoil and weathering reactions lead to a redistribution of Zn in the topsoil. A loss of 35% Zn and S from the topsoil compared to the parent material with 10 g/kg Zn has been observed. 13% of total Zn in the topsoil can be regarded as mobile or easily mobilizable according to sequential chemical extractions (SCE). Zn concentrations of 10 mg/L were found in the soil water, where pH is acidic. Electron supply and the buffer capacity of the soil were identified as main factors controlling Zn mobility and release to the groundwater. Variable Pb concentrations up to 30 µg/L were observed in the soil water. In contrast to Zn, Pb is enriched in the mobile fraction of the oxidized topsoil by a factor of 2 compared to the subsoil with 2 g/kg Pb. 80% of the cation exchange capacity in the topsoil is occupied by Pb. Therefore, plant uptake and bioavailability are of major concern. If the site is not prevented from proceeding acidification in the future, a significant release of Zn, S, and Pb to the groundwater has to be expected. Results from this study show that the assessment of metal release especially from sulfide bearing anoxic material requires an extensive comprehension of leaching mechanisms on the one hand and on weathering processes, which influence the speciation and the mobility of metals, on the other hand. Processes, which may change redox and pH conditions in the future, have to be addressed to enable sound decisions for soil and groundwater protection and remediation.

Effect of drug physicochemical properties on the release from liposomal systems in vitro and in vivo

Liposomes were discovered about 40 years ago by A. Bangham and since then they became very versatile tools in biology, biochemistry and medicine. Liposomes are the smallest artificial vesicles of spherical shape that can be produced from natural untoxic phospholipids and cholesterol. Liposome vesicles can be used as drug carriers and become loaded with a great variety of molecules, such as small drug molecules, proteins, nucleotides and even plasmids. Due to the variability of liposomal compositions they can be used for a large number of applications. In this thesis the β-adrenoceptor antagonists propranolol, metoprolol, atenolol and pindolol, glucose, 18F-Fluorodeoxyglucose (FDG) and Er-DTPA were used for encapsulation in liposomes, characterization and in vitro release studies. Multilamellar vesicles (MLV), large unilamellar vesicles (LUV) and smaller unilamellar vesicles (SUV) were prepared using one of the following lipids: 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H) or a mixture of DSPC and DMPC (1:1). The freeze thawing method was used for preparation of liposomes because it has three advantages (1) avoiding the use of chloroform, which is used in other methods and causes toxicity (2) it is a simple method and (3) it gives high entrapping efficiency. The percentage of entrapping efficiencies (EE) was different depending on the type and phase transition temperature (Tc) of the lipid used. The average particle size and particle size distribution of the prepared liposomes were determined using both dynamic light scattering (DLS) and laser diffraction analyzer (LDA). The average particle size of the prepared liposomes differs according to both liposomal type and lipid type. Dispersion and dialysis techniques were used for the study of the in vitro release of β-adrenoceptor antagonists. The in vitro release rate of β-adrenoceptor antagonists was increased from MLV to LUV to SUV. Regarding the lipid type, β-adrenoceptor antagonists exhibited different in vitro release pattern from one lipid to another. Two different concentrations (50 and 100mg/ml) of Ph90H were used for studying the effect of lipid concentration on the in vitro release of β-adrenoceptor antagonists. It was found that liposomes made from 50 mg/ml Ph90H exhibited higher release rates than liposomes made at 100 mg/ml Ph90H. Also glucose was encapsulated in MLV, LUV and SUV using 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H), soybean lipid (Syb) or a mixture of DSPC and DMPC (1:1). The average particle size and size distribution were determined using laser diffraction analysis. It was found that both EE and average particle size differ depending on both lipid and liposomal types. The in vitro release of glucose from different types of liposomes was performed using a dispersion method. It was found that the in vitro release of glucose from different liposomes is dependent on the lipid type. 18F-FDG was encapsulated in MLV 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H), soybean lipid (Syb) or a mixture of DSPC and DMPC (1:1). FDG-containing LUV and SUV were prepared using Ph90H lipid. The in vitro release of FDG from the different types of lipids was accomplished using a dispersion method. Results similar to that of glucose release were obtained. In vivo imaging of FDG in both uncapsulated FDG and FDG-containing MLV was performed in the brain and the whole body of rats using PET scanner. It was found that the release of FDG from FDG-containing MLV was sustained. In vitro-In vivo correlation was studied using the in vitro release data of FDG from liposomes and in vivo absorption data of FDG from injected liposomes using microPET. Erbium, which is a lanthanide metal, was used as a chelate with DTPA for encapsulation in SUV liposomes for the indirect radiation therapy of cancer. The liposomes were prepared using three different concentrations of soybean lipid (30, 50 and 70 mg/ml). The stability of Er-DTPA SUV liposomes was carried out by storage of the prepared liposomes at three different temperatures (4, 25 and 37 °C). It was found that the release of Er-DTPA complex is temperature dependent, the higher the temperature, the higher the release. There was an inverse relationship between the release of the Er-DTPA complex and the concentration of lipid.