The release of zinc and lead from mine tailings

Mining and processing of metal ores are important causes of soil and groundwater contamination in many regions worldwide. Metal contaminations are a serious risk for the environment and human health. The assessment of metal contaminations in the soil is therefore an important task. A common approach to assess the environmental risk emanating from inorganic contaminations to soil and groundwater is the use of batch or column leaching tests. In this regard, the suitability of leaching tests is a controversial issue. In the first part of this work the applicability and comparability of common leaching tests in the scope of groundwater risk assessment of inorganic contamination is reviewed and critically discussed. Soil water sampling methods (the suction cup method and centrifugation) are addressed as an alternative to leaching tests. Reasons for limitations of the comparability of leaching test results are exposed and recommendations are given for the expedient application of leaching tests for groundwater risk assessment. Leaching tests are usually carried out in open contact with the atmosphere disregarding possible changes of redox conditions. This can affect the original metal speciation and distribution, particularly when anoxic samples are investigated. The influence of sample storage on leaching test results of sulfide bearing anoxic material from a former flotation dump is investigated in a long-term study. Since the oxidation of the sulfide-bearing samples leads to a significant overestimation of metal release, a feasible modification for the conduction of common leaching tests for anoxic material is proposed, where oxidation is prevented efficiently. A comparison of leaching test results to soil water analyzes have shown that the modified saturation soil extraction (SSE) is found to be the only of the tested leaching procedures, which can be recommended for the assessment of current soil water concentrations at anoxic sites if direct investigation of the soil water is impossible due to technical reasons. The vertical distribution and speciation of Zn and Pb in the flotation residues as well as metal concentrations in soil water and plants were investigated to evaluate the environmental risk arising from this site due to the release of metals. The variations in pH and inorganic C content show an acidification of the topsoil with pH values down to 5.5 in the soil and a soil water pH of 6 in 1 m depth. This is due to the oxidation of sulfides and depletion in carbonates. In the anoxic subsoil pH conditions are still neutral and soil water collected with suction cups is in equilibrium with carbonate minerals. Results from extended x-ray absorption fine-structure (EXAFS) spectroscopy confirm that Zn is mainly bound in sphalerite in the subsoil and weathering reactions lead to a redistribution of Zn in the topsoil. A loss of 35% Zn and S from the topsoil compared to the parent material with 10 g/kg Zn has been observed. 13% of total Zn in the topsoil can be regarded as mobile or easily mobilizable according to sequential chemical extractions (SCE). Zn concentrations of 10 mg/L were found in the soil water, where pH is acidic. Electron supply and the buffer capacity of the soil were identified as main factors controlling Zn mobility and release to the groundwater. Variable Pb concentrations up to 30 µg/L were observed in the soil water. In contrast to Zn, Pb is enriched in the mobile fraction of the oxidized topsoil by a factor of 2 compared to the subsoil with 2 g/kg Pb. 80% of the cation exchange capacity in the topsoil is occupied by Pb. Therefore, plant uptake and bioavailability are of major concern. If the site is not prevented from proceeding acidification in the future, a significant release of Zn, S, and Pb to the groundwater has to be expected. Results from this study show that the assessment of metal release especially from sulfide bearing anoxic material requires an extensive comprehension of leaching mechanisms on the one hand and on weathering processes, which influence the speciation and the mobility of metals, on the other hand. Processes, which may change redox and pH conditions in the future, have to be addressed to enable sound decisions for soil and groundwater protection and remediation.

Ectomycorrhizae of sessile oak (Quercus petraea (Matt.) Liebl.)

Investigations were performed during the years 1999 to 2001 on a limed and unlimed plot within a high-elevated sessile oak forest. The oak forest (with 90 years old European beech at the understorey) was 170 to 197 years old. It is located at forest district Merzalben, location 04/0705, which is situated in the Palatinate Forest in south-west Germany. Liming was performed in December 1988 when 6 tons/ha of powdered Dolomite were brought up by the forestry department. Liming was performed to counteract the effects of soil acidification (pH(H2O) at Horizon A (0-10 cm): 3.9), which is induced by long-term (anthropogenic) acidic cloud cover and precipitation. Potentially toxic Al3+ ions, which become solubilized below pH 5, were suspected to be responsible for forest dieback and sudden death of the mature oaks. The most logical entry point for these toxic ions was suspected to occur in the highly absorptive region of the ectomycorrhizae (fungal covered root tips). However, the diversity and abundance of oak-ectomycorrhizal species and their actual roles in aluminum translocation (or blockage) were unknown. It was hypothesized that the ectomycorrhizae of sessile oaks in a limed forest would exhibit greater seasonal diversity and abundance with less evidence of incorporated aluminum than similar oak ectomycorrhizae from unlimed soils. To test this hypothesis, 12 oaks in the limed plot and 12 in an adjacent unlimed plot were selected. Each spring and fall for 2 years (1999 & 2000), 2 sets of soil cylinders (9.9 cm dia.) were extracted from Horizon A (0-10 cm), Horizon B (30-40 cm) and Horizon C (50-60 cm depth) at a distance of 1 meter from each tree base. Roots were extracted from each probe by gentle sieving and rinsing. Soil samples were retained for pH (H2O, CaCl2, and KCl) and moisture analysis. One set of roots was sorted by size and air-dried for biomass analysis. The finest mycorrhizal roots of this set were used for bound and unbound (cytosolic) mineral [Al, Ca, Mg, K, Na, Mn, S, Zn, Fe, Cd and Pb] analysis (by Landwirtschaftliche Untersuchungs- und Forschungsanstalt Rheinland Palatinate (LUFA)). Within 7 days of collection, the mycorrhizal tips from the second set of probes were excised, sorted, identified (using Agerer’s Color Atlas), counted and weighed. Seasonal diversity and abundance was characterized for 50 of the 93 isolates. The location and relative abundance of Al within the fungal and root cell walls was characterized for 68 species using 0.01% Morin dye and fluorescence microscopy. Morin complexes with Al to produce an intense yellow fluorescence. The 4 most common species (Cenococcum geophilum, Quercirhiza fibulocsytidiata, Lactarius subdulcis, Piceirhiza chordata) were prepared for bound Al, Ca, Fe and K mineral analysis by LUFA. The unlimed and limed plots were then compared. Only 46 of the 93 isolated ectomycorrhizal species had been previously associated with oaks in the literature. Mycorrhizal biomass was most abundant in Horizon A, declining with depth, drought and progressive soil acidification. Mycorrhizae were most diverse (32 species) in the limed plot, but individual species abundance was low (R Selection) in comparison to the unlimed plot, where there were fewer species (24) but each species present was abundant (K Selection). Liming increased diversity and altered dominance hierarchy, seasonal distributions and succession trends of ectomycorrhizae at all depths. Despite an expected reduction in Al content, the limed ectomycorrhizae both qualitatively (fluorescence analysis) and quantitatively (mineral analysis) contained more bound Al, especially so in Horizon A. The Al content qualitatively and quantitatively increased with depth in the unlimed and limed plots. The bound Al content fluctuated between 4000-and 20000 ppm while the unbound component was consistently lower (4 -14 ppm). The relative amount of unbound Al declined upon liming implying less availability for translocation to the crown area of the trees. This correspouds with the findings of good crown appearance and lower tree mortality in the limed zone. Each ectomycorrhizal species was unique in its ability to block, sequester (hold) or translocate Aluminum. In several species, Al uptake varied with changes in moisture, pH, depth and liming. According to the fluorescence study, about 48% of the isolated ectomycorrhizal species blocked and/or sequestered (held) Al in their mantle and/or Hartig net walls, qualitatively lowering bound Al in the adjacent root cell walls. Generally, if Al was more concentrated in the fungal walls, it was less evident in the cortex and xylem and conversely, if Al was low or absent from the fungal walls it was frequently more evident in the cortex and xylem.

Speciation of metals in agricultural lime and contaminated soil

Die Verwendung von Metallen zur Entwicklung der heutigen fortschrittlichen technologischenrnGesellschaft lässt auf eine lange Geschichte zurück blicken. Im Zuge des letzten Jahrhundertsrnwurde realisiert, dass die chemischen und radioaktiven Eigenschaften von Metallen einernernsthafte Bedrohung für die Menschheit darstellen können. In der modernen Geochemie ist esrnallgemein akzeptiert, dass die spezifischen physikochemische Formen entscheidender sind, alsrndas Verhalten der gesamten Konzentration der Spurenmetalle in der Umwelt. Die Definition derrnArtbildung kann grob als die Identifizierung und Quantifizierung der verschiedenen Formen oderrnPhasen für ein Element zugeordnet werden. Die chemische Extraktion ist eine gemeinsamernSpeziierungstechnik bei der die Fraktionierung des Gesamtmetallgehaltes zur Analyse der Quellernanthropogener Metallkontamination und zur Vorhersage der Bioverfügbarkeit von verschiedenenrnMetallformen dient. Die Philosophie der partiellen und sequenziellen Extraktionsmethodernbesteht darin, dass insbesondere das Extraktionsmittel phasenspezifisch unter chemischemrnAngriff unterschiedlicher Mischungsformen steht. Die Speziation von Metall ist wichtig bei derrnBestimmung der Toxizität, Mobilität, Bioverfügbarkeit des Metalls und damit ihr Schicksal inrnder Umwelt und biologischem System. Die Artenbildungsanalyse kann für das Verständnis derrnAuswirkung auf die menschliche Gesundheit und bei ökologischen Risiken durch diernQuantifizierung von Metallspezies bei einem Untersuchungs-standort angewendet werden undrnanschließend können Sanierungsstrategien für den Standort umgesetzt werden. Mit Hilfe derrnSpezifizierung wurden Arsen und Kupfer in landwirtschaftlichem Kalkdünger und Thallium inrnkontaminierten Böden untersucht und in den folgenden Abschnitten im Einzelnen dargestellt.