Fourier-transform rheology on anionically synthesised polymer melts and solutions of various topology

Aim of this thesis was to further extend the applicability of the Fourier-transform (FT) rheology technique especially for non-linear mechanical characterisation of polymeric materials on the one hand and to investigated the influence of the degree of branching on the linear and non-linear relaxation behaviour of polymeric materials on the other hand. The latter was achieved by employing in particular FT-rheology and other rheological techniques to variously branched polymer melts and solutions. For these purposes, narrowly distributed linear and star-shaped polystyrene and polybutadiene homo-polymers with varying molecular weights were anionically synthesised using both high-vacuum and inert atmosphere techniques. Furthermore, differently entangled solutions of linear and star-shaped polystyrenes in di-sec-octyl phthalate (DOP) were prepared. The several linear polystyrene solutions were measured under large amplitude oscillatory shear (LAOS) conditions and the non-linear torque response was analysed in the Fourier space. Experimental results were compared with numerical predictions performed by Dr. B. Debbaut using a multi-mode differential viscoelastic fluid model obeying the Giesekus constitutive equation. Apart from the analysis of the relative intensities of the harmonics, a detailed examination of the phase information content was developed. Further on, FT-rheology allowed to distinguish polystyrene melts and solutions due to their different topologies where other rheological measurements failed. Significant differences occurred under LAOS conditions as particularly reflected in the phase difference of the third harmonic, Ħ3, which could be related to shear thinning and shear thickening behaviour.

Numeralklassifikatoren im Thai

Wie viele andere Sprachen Ost- und Südostasiens ist das Thai eine numerusneutrale Sprache, in der ein Nomen lediglich das Konzept benennt und keinen Hinweis auf die Anzahl der Objekte liefert. Um Nomina im Thai zählen zu können, ist der Klassifikator (Klf) nötig, der die Objekte anhand ihrer semantischen Schlüsseleigenschaft herausgreift und individualisiert. Neben der Klassifikation stellt die Individualisierung die Hauptfunktion des Klf dar. Weitere Kernfunktionen des Klf außerhalb des Zählkontextes sind die Markierung der Definitheit, des Numerus sowie des Kontrasts. Die wichtigsten neuen Ergebnisse dieser Arbeit, die sowohl die Ebenen der Grammatik und Semantik als auch die der Logik und Pragmatik integriert, sind folgende: Im Thai kann der Klf sowohl auf der Element- als auch auf der Mengenebene agieren. In der Verbindung mit einem Demonstrativ kann der Klf auch eine pluralische Interpretation hervorrufen, wenn er auf eine als pluralisch präsupponierte Gesamtmenge referiert oder die Gesamtmenge in einer Teil-Ganzes-Relation individualisiert. In einem Ausdruck, der bereits eine explizite Zahlangabe enthält, bewirkt die Klf-Demonstrativ-Konstruktion eine Kontrastierung von Mengen mit gleichen Eigenschaften. Wie auch der Individualbegriff besitzt der Klf Intension und Extension. Intension und Extension von Thai-Klf verhalten sich umgekehrt proportional, d.h. je spezifischer der Inhalt eines Klf ist, desto kleiner ist sein Umfang. Der Klf signalisiert das Schlüsselmerkmal, das mit der Intension des Nomens der Identifizierung des Objekts dient. Der Klf individualisiert das Nomen, indem er Teilmengen quantifiziert. Er kann sich auf ein Objekt, eine bestimmte Anzahl von Objekten oder auf alle Objekte beziehen. Formal logisch lassen sich diese Funktionen mithilfe des Existenz- und des Allquantors darstellen. Auch die Nullstelle (NST) läßt sich formal logisch darstellen. Auf ihren jeweiligen Informationsgehalt reduziert, ergeben sich für Klf und NST abhängig von ihrer Positionierung verschiedene Informationswerte: Die Opposition von Klf und NST bewirkt in den Fragebögen ausschließlich skalare Q-Implikaturen, die sich durch die Informationsformeln in Form einer Horn-Skala darstellen lassen. In einem sich aufbauenden Kontext transportieren sowohl Klf als auch NST in der Kontextmitte bekannte Informationen, wodurch Implikaturen des M- bzw. I-Prinzips ausgelöst werden. Durch die Verbindung der Informationswerte mit den Implikaturen des Q-, M- und I-Prinzips lässt sich anhand der Positionierung direkt erkennen, wann der Klf die Funktion der Numerus-, der Definitheits- oder der Kontrast-Markierung erfüllt.

Optical resonances of sphere-on-plane geometries

The optical resonances of metallic nanoparticles placed at nanometer distances from a metal plane were investigated. At certain wavelengths, these “sphere-on-plane” systems become resonant with the incident electromagnetic field and huge enhancements of the field are predicted localized in the small gaps created between the nanoparticle and the plane. An experimental architecture to fabricate sphere-on-plane systems was successfully achieved in which in addition to the commonly used alkanethiols, polyphenylene dendrimers were used as molecular spacers to separate the metallic nanoparticles from the metal planes. They allow for a defined nanoparticle-plane separation and some often are functionalized with a chromophore core which is therefore positioned exactly in the gap. The metal planes used in the system architecture consisted of evaporated thin films of gold or silver. Evaporated gold or silver films have a smooth interface with their substrate and a rougher top surface. To investigate the influence of surface roughness on the optical response of such a film, two gold films were prepared with a smooth and a rough side which were as similar as possible. Surface plasmons were excited in Kretschmann configuration both on the rough and on the smooth side. Their reflectivity could be well modeled by a single gold film for each individual measurement. The film has to be modeled as two layers with significantly different optical constants. The smooth side, although polycrystalline, had an optical response that was very similar to a monocrystalline surface while for the rough side the standard response of evaporated gold is retrieved. For investigations on thin non-absorbing dielectric films though, this heterogeneity introduces only a negligible error. To determine the resonant wavelength of the sphere-on-plane systems a strategy was developed which is based on multi-wavelength surface plasmon spectroscopy experiments in Kretschmann-configuration. The resonant behavior of the system lead to characteristic changes in the surface plasmon dispersion. A quantitative analysis was performed by calculating the polarisability per unit area /A treating the sphere-on-plane systems as an effective layer. This approach completely avoids the ambiguity in the determination of thickness and optical response of thin films in surface plasmon spectroscopy. Equal area densities of polarisable units yielded identical response irrespective of the thickness of the layer they are distributed in. The parameter range where the evaluation of surface plasmon data in terms of /A is applicable was determined for a typical experimental situation. It was shown that this analysis yields reasonable quantitative agreement with a simple theoretical model of the sphere-on-plane resonators and reproduces the results from standard extinction experiments having a higher information content and significantly increased signal-to-noise ratio. With the objective to acquire a better quantitative understanding of the dependence of the resonance wavelength on the geometry of the sphere-on-plane systems, different systems were fabricated in which the gold nanoparticle size, type of spacer and ambient medium were varied and the resonance wavelength of the system was determined. The gold nanoparticle radius was varied in the range from 10 nm to 80 nm. It could be shown that the polyphenylene dendrimers can be used as molecular spacers to fabricate systems which support gap resonances. The resonance wavelength of the systems could be tuned in the optical region between 550 nm and 800 nm. Based on a simple analytical model, a quantitative analysis was developed to relate the systems’ geometry with the resonant wavelength and surprisingly good agreement of this simple model with the experiment without any adjustable parameters was found. The key feature ascribed to sphere-on-plane systems is a very large electromagnetic field localized in volumes in the nanometer range. Experiments towards a quantitative understanding of the field enhancements taking place in the gap of the sphere-on-plane systems were done by monitoring the increase in fluorescence of a metal-supported monolayer of a dye-loaded dendrimer upon decoration of the surface with nanoparticles. The metal used (gold and silver), the colloid mean size and the surface roughness were varied. Large silver crystallites on evaporated silver surfaces lead to the most pronounced fluorescence enhancements in the order of 104. They constitute a very promising sample architecture for the study of field enhancements.

Content extraction: Identifying the main content in HTML documents

Except the article forming the main content most HTML documents on the WWW contain additional contents such as navigation menus, design elements or commercial banners. In the context of several applications it is necessary to draw the distinction between main and additional content automatically. Content extraction and template detection are the two approaches to solve this task. This thesis gives an extensive overview of existing algorithms from both areas. It contributes an objective way to measure and evaluate the performance of content extraction algorithms under different aspects. These evaluation measures allow to draw the first objective comparison of existing extraction solutions. The newly introduced content code blurring algorithm overcomes several drawbacks of previous approaches and proves to be the best content extraction algorithm at the moment. An analysis of methods to cluster web documents according to their underlying templates is the third major contribution of this thesis. In combination with a localised crawling process this clustering analysis can be used to automatically create sets of training documents for template detection algorithms. As the whole process can be automated it allows to perform template detection on a single document, thereby combining the advantages of single and multi document algorithms.