Glutamate-induced potentiation of calcium influx in primary hippocampal culture neurons

ABSTRACT This works aim was to test whether LTP-like features can also be measured in cell culture and by methods that allow to analyse a alrger number of cells. A suitable method for this purpose is calcium imaging. The rationale for this approach lies in the fact that LTP/LTD are dependent on changes in intracellular calcium concentrations. Calcium levels have been measured using the calcium sensitive dye fura-2, whose fluorescence spectrum changes upon formation of the [fura-2-Ca2+] complex. Our LTP-inducing protocol comprised of two glutamate stimuli of identical size and duration (50 mM, 30 s) which were separated by 35 min. We could demonstrate that such a stimulation pattern gives rise to approx. 25% larger calcium influx at the second stimulus. It has been shown than such a stimulation pattern gives rise to an average of 25% augmentation (potentiation) of the second response, with 69% of potentiated cells. This experimental paradigm shows the pharmacological properties of LTP, established by previous electrophysiological studies:- blocking of NMDARs and mGluRs eliminates LTP induction;- blocking of AMPARs and L-type VGCCs does not eliminate LTP induction. Having obtained a system for induction and following of LTP-like changes, a preliminary application example was performed. Its purpose was to investigate possible influence of nicotine and galanthamine on our potentiation effect. Nicotine (100 mM) was shown both to increase and to eliminate glutamate-induced potentiation. Galanthamine coapplication (0.5 mM) with nicotine and glutamate exerted no effect on nicotinic modulation. However, galanthamine coapplied with glutamate alone seems to augment glutamate-induced potentiation. An LTP model system presented here could be additionally refined, by variation of glutamate application times, and testing for dependence on various forms of protein kinases. Galanthamine effect would probably be better addressed by cell-to-cell measurements instead of statistical approach, with subsequent identification of the cell type. Alternatively, combined calcium imaging – electrophysiological experiments could be performed. Spatial and temporal properties of intracellular ion dynamics could be utilised as diagnostic tools of the physiological state of the cells, thereby finding its application in functional proteomics.

High resolution study of local stress inside alumina - micro mechanical analysis using laser scanning confocal microscope

The aim of this work is to measure the stress inside a hard micro object under extreme compression. To measure the internal stress, we compressed ruby spheres (a-Al2O3: Cr3+, 150 µm diameter) between two sapphire plates. Ruby fluorescence spectrum shifts to longer wavelengths under compression and can be related to the internal stress by a conversion coefficient. A confocal laser scanning microscope was used to excite and collect fluorescence at desired local spots inside the ruby sphere with spatial resolution of about 1 µm3. Under static external loads, the stress distribution within the center plane of the ruby sphere was measured directly for the first time. The result agreed to Hertz’s law. The stress across the contact area showed a hemispherical profile. The measured contact radius was in accord with the calculation by Hertz’s equation. Stress-load curves showed spike-like decrease after entering non-elastic phase, indicating the formation and coalescence of microcracks, which led to relaxing of stress. In the vicinity of the contact area luminescence spectra with multiple peaks were observed. This indicated the presence of domains of different stress, which were mechanically decoupled. Repeated loading cycles were applied to study the fatigue of ruby at the contact region. Progressive fatigue was observed when the load exceeded 1 N. As long as the load did not exceed 2 N stress-load curves were still continuous and could be described by Hertz’s law with a reduced Young’s modulus. Once the load exceeded 2 N, periodical spike-like decreases of the stress could be observed, implying a “memory effect” under repeated loading cycles. Vibration loading with higher frequencies was applied by a piezo. Redistributions of intensity on the fluorescence spectra were observed and it was attributed to the repopulation of the micro domains of different elasticity. Two stages of under vibration loading were suggested. In the first stage continuous damage carried on until certain limit, by which the second stage, e.g. breakage, followed in a discontinuous manner.

Surface-plasmon optical and electrochemical characterization of biofunctional surface architectures

The development and characterization of biomolecule sensor formats based on the optical technique Surface Plasmon Resonance (SPR) Spectroscopy and electrochemical methods were investigated. The study can be divided into two parts of different scope. In the first part new novel detection schemes for labeled targets were developed on the basis of the investigations in Surface-plamon Field Enhanced Spectroscopy (SPFS). The first one is SPR fluorescence imaging formats, Surface-plamon Field Enhanced Fluorescence Microscopy (SPFM). Patterned self assembled monolayers (SAMs) were prepared and used to direct the spatial distribution of biomolecules immobilized on surfaces. Here the patterned monolayers would serve as molecular templates to secure different biomolecules to known locations on a surface. The binding processed of labeled target biomolecules from solution to sensor surface were visually and kinetically recorded by the fluorescence microscope, in which fluorescence was excited by the evanescent field of propagating plasmon surface polaritons. The second format which also originates from SPFS technique, Surface-plamon Field Enhanced Fluorescence Spectrometry (SPFSm), concerns the coupling of a fluorometry to normal SPR setup. A spectrograph mounted in place of photomultiplier or microscope can provide the information of fluorescence spectrum as well as fluorescence intensity. This study also firstly demonstrated the analytical combination of surface plasmon enhanced fluorescence detection with analyte tagged by semiconducting nano- crystals (QDs). Electrochemically addressable fabrication of DNA biosensor arrays in aqueous environment was also developed. An electrochemical method was introduced for the directed in-situ assembly of various specific oligonucleotide catcher probes onto different sensing elements of a multi-electrode array in the aqueous environment of a flow cell. Surface plasmon microscopy (SPM) is utilized for the on-line recording of the various functionalization steps. Hybridization reactions between targets from solution to the different surface-bound complementary probes are monitored by surface-plasmon field-enhanced fluorescence microscopy (SPFM) using targets that are either labeled with organic dyes or with semiconducting quantum dots for color-multiplexing. This study provides a new approach for the fabrication of (small) DNA arrays and the recording and quantitative evaluation of parallel hybridization reactions. In the second part of this work, the ideas of combining the SP optical and electrochemical characterization were extended to tethered bilayer lipid membrane (tBLM) format. Tethered bilayer lipid membranes provide a versatile model platform for the study of many membrane related processes. The thiolipids were firstly self-assembled on ultraflat gold substrates. Fusion of the monolayers with small unilamellar vesicles (SUVs) formed the distal layer and the membranes thus obtained have the sealing properties comparable to those of natural membranes. The fusion could be monitored optically by SPR as an increase in reflectivity (thickness) upon formation of the outer leaflet of the bilayer. With EIS, a drop in capacitance and a steady increase in resistance could be observed leading to a tightly sealing membrane with low leakage currents. The assembly of tBLMs and the subsequent incorporation of membrane proteins were investigated with respect to their potential use as a biosensing system. In the case of valinomycin the potassium transport mediated by the ion carrier could be shown by a decrease in resistance upon increasing potassium concentration. Potential mediation of membrane pores could be shown for the ion channel forming peptide alamethicin (Alm). It was shown that at high positive dc bias (cis negative) Alm channels stay at relatively low conductance levels and show higher permeability to potassium than to tetramethylammonium. The addition of inhibitor amiloride can partially block the Alm channels and results in increase of membrane resistance. tBLMs are robust and versatile model membrane architectures that can mimic certain properties of biological membranes. tBLMs with incorporated lipopolysaccharide (LPS) and lipid A mimicking bacteria membranes were used to probe the interactions of antibodies against LPS and to investigate the binding and incorporation of the small antimicrobial peptide V4. The influence of membrane composition and charge on the behavior of V4 was also probed. This study displays the possibility of using tBLM platform to record and valuate the efficiency or potency of numerous synthesized antimicrobial peptides as potential drug candidates.

Etablierung transgener BY-2-Zelllinien zur In-vivo-Lokalisierung pflanzlicher Cytoskelettproteine

Bei den Pflanzen sind viele Fragen bezüglich der Organisation und Regulation des bei der Zellteilung und differenzierung wichtigen Auf-, Ab- und Umbaus des Mikrotubuli-Netzwerkes noch immer offen, insbesondere was die Rolle des γ-Tubulins betrifft. Ziel der vorliegenden Arbeit war die Etablierung von BY-2 Modell-Zelllinien (Nicotiana), die verschiedene mit fluoreszierenden Proteinen (FP) markierte Elemente des Cytoskeletts exprimieren, um eine fluoreszenzmikroskopische Detektion in vivo zu ermöglichen.rnAls Grundlage für alle weiteren Versuche wurde eine zuverlässige Methode zur A. tumefaciens vermittelten stabilen Transfektion von BY-2 Zellen erarbeitet. Für die Expression von FP-markierten Cytoskelettproteinen, wurden entsprechende Fusionskonstrukte kloniert und via A. tumefaciens in BY-2 Zellen transferiert. So gelang zunächst die Herstellung transgener Zelllinien, die GFP-markiertes α- bzw. γ-Tubulin exprimierten. Diese sollten später als Basis für die Untersuchung des dynamischen Mikrotubuli-Netzwerkes bzw. dessen Regulation dienen. In beiden Zelllinien standen die Konstrukte zunächst unter Kontrolle eines doppelten 35S-Promotors, was zu einer starken, konstitutiven Expression der Transgene führte. Fluoreszenzmikroskopisch konnten Strukturen, an deren Aufbau Mikrotubuli beteiligt sind, detektiert werden. Aufgrund einer starken Hintergrundfluoreszenz, vermutlich bedingt durch die konstitutive Überexpression, war die Darstellung feinerer Bereiche, wie sie im Cytoskelett häufig auftreten, jedoch äußerst schwierig. Deshalb wurde eine schwächere bzw. adäquate Expressionsrate angestrebt. rnPhysiologische Expressionsraten sollten vor allem durch den endogenen γ-Tubulin-Promotor ermöglicht werden. Da die entsprechende Sequenz noch unbekannt war, wurde sie zunächst bestimmt und in ein passendes Konstrukt integriert. Fluoreszenzmikroskopische Untersuchungen der resultierenden Zelllinie ließen auf eine stark reduzierte Expressionsrate schließen. Tatsächlich war die Detektion von Cytoskelettstrukturen, wenn überhaupt, erst bei deutlich längeren Belichtungszeiten möglich. Bedingt durch die langen Belichtungszeiten wurde die Dokumentation durch eine latente pflanzentypische Autofluoreszenz der Zellen erschwert. Auch wenn hier keine detailreicheren Aufnahmen der Cytoskelettstrukturen möglich waren, ist die Zellkultur für weiterführende Untersuchungen, z.B. in Studien bezüglich des zeitlichen Expressionsmusters des γ-Tubulins, potentiell geeignet. Der Einsatz eines sensibleren Mikroskopsystems ist allerdings erforderlich. rnUm klären zu können, inwieweit γ-Tubulin mit den Mikrotubuli co-lokalisiert, wurden Zelllinien benötigt, bei denen die entsprechenden Elemente unterschiedlich markiert waren. Zu diesem Zweck wurde der Einsatz von RFP-markiertem Tubulin getestet. Eine deutliche Überexpression von RFP alleine war möglich. Trotz mehrfacher Wiederholung der Versuche war aber keine Expression von RFP-markiertem α-Tubulin in BY-2 Zellen zur Visualisierung der Mikrotubuli detektierbar. Die DNA-Sequenzen waren im Genom nachweisbar, eine Transkription jedoch nicht. Möglicherweise spielten hier gene silencing Effekte eine Rolle. Das verwendete RFP (TagRFP) und GFP stammten aus unterschiedlichen Organismen, aus einer Seeanemone bzw. einer Qualle. Eine Lösung könnte der Austausch des TagRFP durch ein Quallen-Derivat, das in einer von grün unterscheidbaren Farbe fluoresziert, bringen. Da bereits BY-2 Zelllinien vorliegen, die GFP-markiertes α- bzw. γ-Tubulin exprimieren, sollte es, nach Klonieren eines entsprechenden Konstruktes, zeitnah möglich sein, eine doppelt transfizierte Zelllinie herzustellen.

New enhancement strategies for plasmon-enhanced fluorescence biosensors

This thesis investigates metallic nanostructures exhibiting surface plasmon resonance for the amplification of fluorescence signal in sandwich immunoassays. In this approach, an analyte is captured by an antibody immobilized on a plasmonic structure and detected by a subsequently bound fluorophore labeled detection antibody. The highly confined field of surface plasmons originates from collective charge oscillations which are associated with high electromagnetic field enhancements at the metal surface and allow for greatly increased fluorescence signal from the attached fluorophores. This feature allows for improving the signal-to-noise ratio in fluorescence measurements and thus advancing the sensitivity of the sensor platform. In particular, the thesis presents two plasmonic nanostructures that amplify fluorescence signal in devices that rely on epifluorescence geometry, in which the fluorophore absorbs and emits light from the same direction perpendicular to the substrate surface.rnThe first is a crossed relief gold grating that supports propagating surface plasmon polaritons (SPPs) and second, gold nanoparticles embedded in refractive index symmetric environment exhibiting collective localized surface plasmons (cLSPs). Finite-difference time-domain simulations are performed in order to design structures for the optimum amplification of established Cy5 and Alexa Fluor 647 fluorophore labels with the absorption and emission wavelengths in the red region of spectrum. The design takes into account combined effect of surface plasmon-enhanced excitation rate, directional surface plasmon-driven emission and modified quantum yield for characteristic distances in immunoassays. Homebuilt optical instruments are developed for the experimental observation of the surface plasmon mode spectrum, measurements of the angular distribution of surface plasmon-coupled fluorescence light and a setup mimicking commercial fluorescence reading systems in epifluorescence geometry.rnCrossed relief grating structures are prepared by interference lithography and multiple copies are made by UV nanoimprint lithography. The fabricated crossed diffraction gratings were utilized for sandwich immunoassay-based detection of the clinically relevant inflammation marker interleukin 6 (IL-6). The enhancement factor of the crossed grating reached EF=100 when compared to a flat gold substrate. This result is comparable to the highest reported enhancements to date, for fluorophores with relatively high intrinsic quantum yield. The measured enhancement factor excellently agrees with the predictions of the simulations and the mechanisms of the enhancement are explained in detail. Main contributions were the high electric field intensity enhancement (30-fold increase) and the directional fluorescence emission at (4-fold increase) compared to a flat gold substrate.rnCollective localized surface plasmons (cLSPs) hold potential for even stronger fluorescence enhancement of EF=1000, due to higher electric field intensity confinement. cLSPs are established by diffractive coupling of the localized surface plasmon resonance (LSPR) of metallic nanoparticles and result in a narrow resonance. Due to the narrow resonance, it is hard to overlap the cLSPs mode with the absorption and emission bands of the used fluorophore, simultaneously. Therefore, a novel two resonance structure that supports SPP and cLSP modes was proposed. It consists of a 2D array of cylindrical gold nanoparticles above a low refractive index polymer and a silver film. A structure that supports the proposed SPP and cLSP modes was prepared by employing laser interference lithography and the measured mode spectrum was compared to simulation results.rn