3 resultados para Coproducts in frames
em ArchiMeD - Elektronische Publikationen der Universität Mainz - Alemanha
Resumo:
This thesis focuses on the design and characterization of a novel, artificial minimal model membrane system with chosen physical parameters to mimic a nanoparticle uptake process driven exclusively by adhesion and softness of the bilayer. The realization is based on polymersomes composed of poly(dimethylsiloxane)-b-poly(2-methyloxazoline) (PMDS-b-PMOXA) and nanoscopic colloidal particles (polystyrene, silica), and the utilization of powerful characterization techniques. rnPDMS-b-PMOXA polymersomes with a radius, Rh ~100 nm, a size polydispersity, PD = 1.1 and a membrane thickness, h = 16 nm, were prepared using the film rehydratation method. Due to the suitable mechanical properties (Young’s modulus of ~17 MPa and a bending modulus of ~7⋅10-8 J) along with the long-term stability and the modifiability, these kind of polymersomes can be used as model membranes to study physical and physicochemical aspects of transmembrane transport of nanoparticles. A combination of photon (PCS) and fluorescence (FCS) correlation spectroscopies optimizes species selectivity, necessary for a unique internalization study encompassing two main efforts. rnFor the proof of concepts, the first effort focused on the interaction of nanoparticles (Rh NP SiO2 = 14 nm, Rh NP PS = 16 nm; cNP = 0.1 gL-1) and polymersomes (Rh P = 112 nm; cP = 0.045 gL-1) with fixed size and concentration. Identification of a modified form factor of the polymersome entities, selectively seen in the PCS experiment, enabled a precise monitor and quantitative description of the incorporation process. Combining PCS and FCS led to the estimation of the incorporated particles per polymersome (about 8 in the examined system) and the development of an appropriate methodology for the kinetics and dynamics of the internalization process. rnThe second effort aimed at the establishment of the necessary phenomenology to facilitate comparison with theories. The size and concentration of the nanoparticles were chosen as the most important system variables (Rh NP = 14 - 57 nm; cNP = 0.05 - 0.2 gL-1). It was revealed that the incorporation process could be controlled to a significant extent by changing the nanoparticles size and concentration. Average number of 7 up to 11 NPs with Rh NP = 14 nm and 3 up to 6 NPs with Rh NP = 25 nm can be internalized into the present polymersomes by changing initial nanoparticles concentration in the range 0.1- 0.2 gL-1. Rapid internalization of the particles by polymersomes is observed only above a critical threshold particles concentration, dependent on the nanoparticle size. rnWith regard possible pathways for the particle uptake, cryogenic transmission electron microscopy (cryo-TEM) has revealed two different incorporation mechanisms depending on the size of the involved nanoparticles: cooperative incorporation of nanoparticles groups or single nanoparticles incorporation. Conditions for nanoparticle uptake and controlled filling of polymersomes were presented. rnIn the framework of this thesis, the experimental observation of transmembrane transport of spherical PS and SiO2 NPs into polymersomes via an internalization process was reported and examined quantitatively for the first time. rnIn a summary the work performed in frames of this thesis might have significant impact on cell model systems’ development and thus improved understanding of transmembrane transport processes. The present experimental findings help create the missing phenomenology necessary for a detailed understanding of a phenomenon with great relevance in transmembrane transport. The fact that transmembrane transport of nanoparticles can be performed by artificial model system without any additional stimuli has a fundamental impact on the understanding, not only of the nanoparticle invagination process but also of the interaction of nanoparticles with biological as well as polymeric membranes. rn
Resumo:
Im tcdA-Gen des Clostridium difficile Stammes C34 wurde eine Insertion mit einer Größe von 1975 bp lokalisiert. Der als CdISt1 bezeichneten Insertion konnten charakteristische Merkmale von Gruppe I Introns und von Insertionselementen zugewiesen werden. Dem im 5 Bereich gelegenen Anteil ließen sich die Intron-spezifischen Eigenschaften zuordnen, im 3 Anteil wurden zwei offene Leseraster gefunden, die hohe Homologien zu Transposasen der IS605 Familie hatten. Funktionelle Analysen belegten die Spleißaktivität des chimären Ribozymes. CdISt1 konnte in mehren Kopien in allen untersuchten C. difficile Stämmen nachgewiesen werden. In anderen clostridialen Spezies konnte das Gruppe I Intron bislang nicht vorgefunden werden. Der Integrationsort in C. difficile war in allen untersuchten Fällen immer ein offenes Leseraster. Bislang waren Gruppe I Introns noch nie in bakteriellen offenen Leserastern beschrieben worden. Es kann angenommen werden, dass der chimäre Aufbau des Ribozymes die Integration in bakterielle offene Leseraster ermöglicht. Dabei wäre für die Spleißaktivität der Gruppe I Intron Anteil maßgeblich, die Mobilität würde über den IS Element Anteil vermittelt. Im Rahmen der Dissertationsarbeit konnten erste experimentelle Hinweise erbracht werden, dass das chimäre Ribozym an der evolution clostridialer Proteine beteiligt sein kann, wovon seinen Wirt C. difficile entsprechend profitieren würde.An insertion of 1975 bp is situated in the tcdA-gene of Clostridium difficile strain C34. The insertion was designated as CdISt1 and it had characteristics of group I introns and insertion elements. The group I characteristcs could be found in the 5 area of the genetic element, in the 3 area two open reading frames were located with high homologies to transposases of the IS605 family. Functional studies could proof the splicing activity of the ribozyme. CdISt1 could be found in several copies in all C. difficile strains examined so far. It was absent in other examined clostridial species. In all cases, the integration site in C. difficile was an open reading frame. Up to now, group I introns never were discovered in bacterial open reading frames. It can be assumed that the chimeric characteristics of the ribozyme permit an integration in bacterial open reading frames. The group I intron part would be responsible of the splicing activity, the IS element part could mediate the mobility of the genetic element. First experimental evidences point to a possible involvement of the chimeric ribozyme in the evolution of clostridial proteins, so the host C. difficile could benefit from its presence.
Resumo:
Nanodimensionale Wirkstoff-Trägersysteme sind in der Lage, sowohl die Bioverfügbarkeit als auch das pharmakokinetische Profil von Wirkstoffen drastisch zu verbessern. Hauptgründe dafür sind eine erhöhte Plasma-Halbwertszeit durch die größenbedingte verminderte renale Ausscheidung und eine gesteigerte Anreicherung im Tumorgewebe durch den EPR-Effekt. Diese Arbeit beschreibt die Synthese und Entwicklung neuer kolloidaler Wirkstoff-Trägersysteme, welche biokompatibel, teilweise bioabbaubar und funktionalisierbar sind. Ein Fluoreszenzfarbstoff wurde als hydrophobes Wirkstoffmodell eingekapselt. Wohldefinierte, eng verteilte und funktionalisierbare HPMA-basierte Block- und statistische Copolymere unterschiedlicher Molekulargewichte (10-25 kDa) und hydrophiler/hydrophober Zusammensetzung (10-50 mol%) wurden mittels RAFT- Polymerisation in Kombination mit dem Reaktivesteransatz hergestellt und in Miniemulsionsprozesse eingesetzt, um ihre Stabilisierungseffizienz zu untersuchen. Dabei zeigte sich, dass die kleineren Copolymere (10 kDa) mit einem Einbau von 10 mol% LMA, sowohl im Modellsystem Polystyrol, als auch im bioabbaubaren PDLLA-System, besonders geeignet sind und ergaben monodisperse Kolloide im Größenbereich von 100 bis 300 nm. Die kolloidalen Systeme zeigten keine Wirkung auf die Zellviabilität. In Folge dessen wurde das Aggregationsverhalten in humanem Blutserum mittels DLS untersucht, wobei keine Interaktion mit Blutbestandteilen festgestellt werden konnte. Zellaufnahmestudien wurden an HeLa-Zellen durchgeführt, um das Schicksal der Kolloide in vitro zu untersuchen. Dabei wurden Kernmaterial, Hülle und das hydrophobe Wirkstoffmodell durch unterschiedliche Fluoreszenzmarkierung getrennt betrachtet. Das hydrophobe Wirkstoffmodell wurde allein durch Interaktion der Kolloide mit den Zellen übertragen, was für eine diffusionsbedingte, initiale, aber unspezifische Freisetzung spricht. Eine solche Freisetzungskinetik kann durch Verwendung von Nitroglycerin, als vasodilatierender Wirkstoff mit geringer unspezifischer Wirkung, ausgenutzt werden, um den EPR-Effekt zu unterstützen. Die Aufnahme des Partikels hingegen geschieht zeitverzögert. Das Schicksal der Kolloide (sowohl des Kern- und desrnHüllmaterials) wurde durch doppelte Fluoreszenzmarkierung untersucht. Dabei kam es zu einer intrazellulären Ablösung der stabilisierenden Block-Copolymere zwischen 8 und 24 h. Nach Aufklärung der Aufnahme- und Freisetzungskinetiken wurde nun die Körperverteilung der PS- und PDLLA-Kolloide nach 18F-Markierung mittels PET und ex vivo-Biodistributiosstudien untersucht. Dabei hatte das Kernmaterial einen Einfluss auf die Körperverteilung. PET-Studien in Mäusen zeigten, dass die stabilisierenden Block-Copolymere beider Kolloide ein starkes Signal in der Niere geben, wobei das der PS-Kolloide weiter ausgeprägt war. Darüber hinaus war eine Anreicherung dieser in Lunge, Leber und Milz festzustellen. Die Verdrängung der stabilisierenden Polymere durch die Interaktion mit Blutbestandteilen erklärt dabei das erhöhte Nieren- und Blasensignal der PS- Kolloide. Das Anreicherungsmuster der PDLLA-Kolloide hingegen zeigte neben der Nierenakkumulation eine erhöhte Blutaktivität und somit die gewünschten langzirkulierenden Eigenschaften. Diese Ergebnisse konnten auch mittels ex vivo- Biodistributionsstudien bestätigt werden. Um die Tumoranreicherung weiter zu verbessern wurde die Verwendung von Folat als Erkennungsstruktur am einfachen HPMA-Polymer untersucht. Die Konjugate zeigten eine erhöhte Anreicherung im Vergleich zu den Polymeren ohne Erkennungsstrukturen. Blockadestudien bestätigten die Selektivität der Anreicherung. Diese Daten zeigen das Potential der Folat-Erkennungsstruktur in vivo innerhalb kurzer Zeitfenster, welche nun auf kolloidale Systeme übertragen werden kann.