Die Rolle von gamma2-Adaptin im endo-lysosomalen Proteintransport von Säuger-Zellen

Ziel der Arbeit war es, die physiologische Funktion von 2-Adaptin zu charakterisieren. 2 Adaptin wurde 1998 erstmals von Takatsu et al. und Lewin et al. als mögliches Mitglied der Clathrin-Adapter-Proteinfamilie beschrieben. Seine genaue physiologische Funktion ist aber bis heute noch unklar. Bisherige Ergebnisse deuten darauf hin, das 2-Adaptin unabhängig von den AP-Komplexen wirkt. rnIn der HBV-Morphogenese ist eine spezielle Funktion von 2-Adaptin bekannt, da es dort nach seiner Ubiquitinierung durch Nedd4 als Adapter zwischen dem HBV L- und Core-Protein fungiert und Änderungen in der 2 Konzentration die HBV-Freisetzung blockieren.rn2-Adaptin besitzt neben den für die Clathrin-Adapter Proteine typischen Clathrin-bindenden Eigenschaften auch die Fähigkeit, Ubiquitin über sein UIM zu binden. Darüberhinaus wird 2-Adaptin durch seine Interaktion mit der Ubiquitin-Ligase Nedd4 selbst ubiquitiniert. Damit besitzt 2-Adaptin typische Eigenschaften eines Ubiquitin-Adapters. 2-Adaptin ist an MVBs lokalisiert und Abweichungen in der 2 Konzentration verändern die MVB-Morphologie. Zudem führt die Überexpression von 2-Adaptin zur Blockade der Freisetzung retroviraler VLPs und die 2 Depletion blockiert den lysosomalen Abbau von EGF, einem Substrat des endo-lysosomalen Proteintransports. Dies alles deutet auf eine mögliche Funktion von 2-Adaptin in diesem Transportsystem hin, welche in dieser Arbeit näher untersucht wurde.rnEs konnte gezeigt werden, dass die Depletion von 2-Adaptin den Abbau von endogenen (z.B. EGF, ubiquitinierte Proteine) und exogenen (z.B. das retrovirale MLV.gag-Polyprotein) Substraten des endo-lysosomalen Weges inhibiert, während sie bei 2 Überexpression verstärkt abgebaut werden. Alle bisher identifizierten „Substrate“ von 2 Adaptin, also Proteine, die durch überschüssiges 2-Adaptin abgebaut werden, besitzen eine Verbindung zum endo-lysosomalen System und / oder zur Ubiquitin-Maschinerie der Zelle. Weitere Hinweise auf eine Rolle von 2 Adaptin im MVB-Weg lieferte die Identifikation von Vps28 und Chmp2A als spezifische Interaktionspartner von 2-Adaptin. Über Vps28 erhält -Adaptin direkten Zugang zum ESCRT-I- und über Chmp2A zum ESCRT-III-Komplex. rnZudem konnte neben dem UIM eine PH-Domäne in 2-Adaptin als wichtige funktionelle Domäne identifiziert werden. Sie stellt das Modul für die Interaktion mit Rab7 dar, welche erstmals gezeigt werden konnte. Auch die Interaktion mit Rab7 deutet auf eine Rolle von 2 Adaptin im endo-lysosomalen Transportsystem hin, da Rab7 an späten Endosomen lokalisiert ist und u.a. die Fusion der MVBs mit den Lysosomen vermittelt. Da die Auswirkungen der Rab7-Überexpression und Depletion auf MLV.gag denen der 2 Überexpression bzw. Depletion entsprechen, liegt die Vermutung nahe, dass 2-Adaptin an einem ähnlich späten Schritt im endo-lysosomalen Transportsystem wirkt wie Rab7. Jedoch blockiert überschüssiges 2 Adaptin die ESCRT-abhängige VLP-Ausschleusung an der Plasmamembran und fungiert daher möglicherweise als negativer Regulator der ESCRT-Kaskade. Da die Überexpression von -Adaptin aber gleichzeitig zum vermehrten lysosomalen Abbau führt, ist eine Funktion von 2-Adaptin bei der MVB-Lysosomen-Fusion wenig wahrscheinlich. Einer solchen Funktion widerspricht auch, dass die intrazelluläre Konzentration von Rab7 und Vps28 durch überschüssiges 2-Adaptin reduziert werden. rnAls dritte funktionell wichtige Domäne in 2-Adaptin konnte ein LIR-Motiv identifiziert werden, über welches -Adaptin mit dem Autophagie-Markerprotein LC3 interagieren kann. Die Interaktion mit LC3, und damit die Verbindung zur Autophagie-Machinerie, liefert eine mögliche Erklärung für den vermehrten Abbau bei 2-Überexpression und den Abbau von Proteinen auf der MVB-Oberfläche. Dabei induziert 2-Adaptin nicht die Autophagie per se, sondern scheint als Autophagie-Adapter zu wirken, der seine Substrate, z.B. MVBs, selektiv dem Abbau durch Autophagie zuführt. rnrnEine mögliche Rolle von 2-Adaptin im zum Lysosom hin gerichteten zellulären Transport konnte bestätigt werden, wobei 2-Adaptin dabei verschiedene Funktionen übernimmt: rn als Ubiquitin-Adapter im endo-lysosomalen System, rn als negativer Regulator der ESCRT-Kaskadern und / oder als Autophagie-Adapter.rn

Effect of drug physicochemical properties on the release from liposomal systems in vitro and in vivo

Liposomes were discovered about 40 years ago by A. Bangham and since then they became very versatile tools in biology, biochemistry and medicine. Liposomes are the smallest artificial vesicles of spherical shape that can be produced from natural untoxic phospholipids and cholesterol. Liposome vesicles can be used as drug carriers and become loaded with a great variety of molecules, such as small drug molecules, proteins, nucleotides and even plasmids. Due to the variability of liposomal compositions they can be used for a large number of applications. In this thesis the β-adrenoceptor antagonists propranolol, metoprolol, atenolol and pindolol, glucose, 18F-Fluorodeoxyglucose (FDG) and Er-DTPA were used for encapsulation in liposomes, characterization and in vitro release studies. Multilamellar vesicles (MLV), large unilamellar vesicles (LUV) and smaller unilamellar vesicles (SUV) were prepared using one of the following lipids: 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H) or a mixture of DSPC and DMPC (1:1). The freeze thawing method was used for preparation of liposomes because it has three advantages (1) avoiding the use of chloroform, which is used in other methods and causes toxicity (2) it is a simple method and (3) it gives high entrapping efficiency. The percentage of entrapping efficiencies (EE) was different depending on the type and phase transition temperature (Tc) of the lipid used. The average particle size and particle size distribution of the prepared liposomes were determined using both dynamic light scattering (DLS) and laser diffraction analyzer (LDA). The average particle size of the prepared liposomes differs according to both liposomal type and lipid type. Dispersion and dialysis techniques were used for the study of the in vitro release of β-adrenoceptor antagonists. The in vitro release rate of β-adrenoceptor antagonists was increased from MLV to LUV to SUV. Regarding the lipid type, β-adrenoceptor antagonists exhibited different in vitro release pattern from one lipid to another. Two different concentrations (50 and 100mg/ml) of Ph90H were used for studying the effect of lipid concentration on the in vitro release of β-adrenoceptor antagonists. It was found that liposomes made from 50 mg/ml Ph90H exhibited higher release rates than liposomes made at 100 mg/ml Ph90H. Also glucose was encapsulated in MLV, LUV and SUV using 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H), soybean lipid (Syb) or a mixture of DSPC and DMPC (1:1). The average particle size and size distribution were determined using laser diffraction analysis. It was found that both EE and average particle size differ depending on both lipid and liposomal types. The in vitro release of glucose from different types of liposomes was performed using a dispersion method. It was found that the in vitro release of glucose from different liposomes is dependent on the lipid type. 18F-FDG was encapsulated in MLV 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H), soybean lipid (Syb) or a mixture of DSPC and DMPC (1:1). FDG-containing LUV and SUV were prepared using Ph90H lipid. The in vitro release of FDG from the different types of lipids was accomplished using a dispersion method. Results similar to that of glucose release were obtained. In vivo imaging of FDG in both uncapsulated FDG and FDG-containing MLV was performed in the brain and the whole body of rats using PET scanner. It was found that the release of FDG from FDG-containing MLV was sustained. In vitro-In vivo correlation was studied using the in vitro release data of FDG from liposomes and in vivo absorption data of FDG from injected liposomes using microPET. Erbium, which is a lanthanide metal, was used as a chelate with DTPA for encapsulation in SUV liposomes for the indirect radiation therapy of cancer. The liposomes were prepared using three different concentrations of soybean lipid (30, 50 and 70 mg/ml). The stability of Er-DTPA SUV liposomes was carried out by storage of the prepared liposomes at three different temperatures (4, 25 and 37 °C). It was found that the release of Er-DTPA complex is temperature dependent, the higher the temperature, the higher the release. There was an inverse relationship between the release of the Er-DTPA complex and the concentration of lipid.

Characterization of primary biogenic aerosol particles by DNA analysis: Diversity of airborne Ascomycota and Basidiomycota

Primary biogenic aerosol (PBA) particles account for large proportions of air particulate matter, and they can influence the hydrological cycle and climate as nuclei for water droplets and ice crystals in clouds, fog, and precipitation. Moreover, they can cause or enhance human, animal, and plant diseases. The actual abundance and properties of PBA particles and components in the atmosphere are, however, still poorly understood and quantified. rnIn this study, the identity, diversity, and frequency of occurrence of PBA particles were investigated by DNA analysis. Methods for the extraction, amplification, and analysis of DNA from aerosol filter samples were developed and optimized for different types of organisms, including fungi, bacteria, and plants. The investigations were focused on fungal DNA, and over 2500 sequences were obtained from air samples collected at different locations and climatic zones around the world (tropical, mid-latitude, sub-polar; continental, marine). rnNearly all fungal DNA sequences could be attributed to the phyla of Ascomycota and Basidiomycota. With regard to species richness, the ratio of Basidiomycota to Ascomycota was much higher in continental air samples (~60:40) than in marine air samples (~30:70). Pronounced differences in the relative abundance and seasonal cycles of various groups of fungi were detected in coarse and fine particulate matter from continental air, with more plant pathogens in the coarse and more human pathogens and allergens in the respirable fine particle fraction (<3 µm). The results of this study provide new information and insights into the sources of PBA particles and the interactions of the biosphere with the atmosphere, climate, and public health. rn

Airborne in situ measurements of ice particles in the tropical tropopause layer

Ice clouds have a strong effect on the Earth-atmosphere radiative energy balance, on the distribution of condensable gases in the atmosphere, as well as on the chemical composition of the air. The ice particles in these clouds can take on a variety of shapes which makes the description of the cloud microphysical properties more difficult. In the tropical upper troposphere/lower stratosphere (UTLS), a region where ice cloud abundance is relatively high, different types of ice clouds can be observed. However, in situ measurements are rare due to the high altitude of these clouds and the few available research aircraft, only three worldwide, that can fly at such altitudes.rnThis work focuses on in situ measurements of the tropical UTLS clouds performedrnwith a Cloud Imaging Probe (CIP) and a Forward Scattering Spectrometer Probern(FSSP-100), whereof the CIP is the key instrument of this thesis. The CIP is anrnairborne in situ instrument that obtains two-dimensional shadow images of cloud particles. Several cloud microphysical parameters can be derived from these measurements, e.g. number concentrations and size distributions. In order to obtain a high quality data set, a careful image analysis and several corrections need to be applied to the CIP observations. These methods are described in detail.rnMeasurements within the tropical UTLS have been performed during two campaigns:rnSCOUT-O3, 2005 in Northern Australia and SCOUT-AMMA, 2006 inWest Africa. Thernobtained data set includes first observations of subvisible cirrus clouds over a continental area and observations of the anvils of deep convective clouds. The latter can be further divided into clouds in mesoscale convective system outflows of different ages and clouds in overshooting cloud turrets that even penetrated the stratosphere. The microphysical properties of these three cloud types are discussed in detail. Furthermore, the vertical structure of the ice clouds in the UTLS is investigated. The values of the microphysical parameters were found to decrease with increasing altitude in the upper troposphere. Particle numbers and maximum sizes were also decreasing with increasing age of the outflow clouds. Further differences between the deep convective clouds and subvisible cirrus were found in the particle morphology as well as in the ratio of the observed aerosol particles to cloud particles which indicates that the different freezing processes (deposition, contact, immersion freezing) play different roles in the formation of the respective clouds. For the achievementrnof a better microphysical characterisation and description numerical fits have been adjusted onto the cloud particle size distributions of the subvisible cirrus as well as on the size distributions of the clouds at different altitudes in the UTLS.

Specific enzymatic cleavage and payload release from peptide-based hybrid nanocapsules

Within this thesis, new approaches for the concepts of peptide-polymer conjugates and peptide-based hybrid nanomaterials are investigated. In the first part, the synthesis of a triblock polymer-peptide-polymer is carried out following a typical peptide coupling reaction, both in solution and on solid-phase. The peptide sequence is chosen, so that it is cleaved by an enzyme preparation of trypsin. End-functionalized polystyrene is used as a model hydrophobic polymer and coupled to the peptide sequence. The results show successful coupling reactions in both methods, while the solid phase method produced a more defined product. Suspensions, consisting of peptide-polymer conjugates particles, are prepared in water by ultrasonication. In contact with the enzyme, the peptide constituting the conjugated particles is cleaved. This demonstrates the enzymatic cleavage in heterophase of enzymatic sequence bond to hydrophobic polymers, and is of great interest for the encapsulation and delivery of hydrophobic molecules.rnA second approach is the preparation of peptide-based hybrid nanocapsules. This is achieved by interfacial polyaddition in inverse miniemulsion with the peptide sequence functionalized with additional amino acids. A method suitable to the use of a peptide sequence for interfacial polyaddition was developed. It is shown that, the polarity of the dispersed phase influences the structures prepared, from particle-like to polymeric shell with a liquid core.rnThe peptide sequence is equipped with a FRET pair (more exactly, an internally-quenched fluorescent system) which allows the real-time monitoring of the enzymatic cleavage of the recognition site. This system shows the successful cleavage of the peptide-based nanocapsules when trypsin preparation is added to the suspensions. A water-soluble fluorescent polymer is efficiently entrapped and its possible use as marker for the capsules is highlighted. Furthermore, a small water-soluble fluorescent dye (SR-101) is successfully encapsulated and the encapsulation efficiency as a function of the functionality of the peptide and the amount of comonomer equivalent (toluene diisocyanate) is studied. The dye is encapsulated at such a high concentration, that self-quenching occurs. Thus, the release of the encapsulated dye triggered by the enzymatic cleavage of the peptide results in a fluorescence recovery of the dye. The fluorescence recovery of the FRET pair in the peptide and of the encapsulated dye correlate well.rnFinally, nanocapsules based on a hepsin-cleavable peptide sequence are prepared. Hepsin is an enzyme, which is highly upregulated in prostate cancer cells. The cleavage of the nanocapsules is investigated with healthy and “cancerous” (hepsin-expressing) cell cultures. The degradation, followed via fluorescence recovery of the FRET system, is faster for the suspensions introduced in the hepsin expressing cell cultures.rnIn summary, this work tackles the domain of responsive nanomaterials for drug delivery from a new perspective. It presents the adaptation of the miniemulsion process for hybrid peptide-based materials, and their successful use in preparing specific enzyme-responsive nanoparticles, with hydrophilic payload release properties.rn