Zur Evolution des Cytoskeletts beim Sibirischen Stör Acipenser baeri

Im Rahmen meiner Arbeit wurden erstmals die Intermediärfilament-Proteine (IF-Proteine) des Sibirischen Störs Acipenser baeri (Strahlenflosser, Knorpelganoid) kloniert und sequenziert. Aus einer cDNA-Bank konnten die Sequenzen von 13 IF-Proteine gewonnen werden. Von insgesamt zehn Keratinen codieren sieben für Typ I-Keratine und drei für Typ II. Zusätzlich konnten noch Desmin, Vimentin und ein Lamin identifiziert werden. Je einem Typ I- (K13) und einem Typ-II-Keratin (K2) fehlen wenige Aminosäuren in der Head-Domäne.Cytoskelett-Präparationen aus Epidermis, Mitteldarm, Magen und Kieme wurden mittels 2D-PAGE aufgetrennt. Durch Einsatz des CKBB-Test und Immunoblots wurden die verschiedenen Typ I und II-Keratine sowie Desmin und Vimentin identifiziert. Die gewebsspezifische Expression der Keratine ermöglichte zumeist ihre Einteilung in 'E' (epidermal) und 'S' ('simple epithelial').Die MALDI-MS-Analyse einer 2D-PAGE-Koelektrophorese von Seitenflosse und Mitteldarm zeigte, daß die 34 vorhandenen Proteinflecke auf nur 13 verschiedene IF-Proteine zurückgehen. Neun dieser Flecke konnten Sequenzen zugewiesen werden. Zusammen mit den verbleibenden vier Proteinflecken ergeben sich für den Stör nunmehr insgesamt 17 bekannte IF-Proteine. Von drei biochemisch identifizierten IS-Keratinen kommt eines nur im Mitteldarm vor und nur einem konnte eine Sequenz zugeordnet werden (K18). Dem einzigen Typ IIS-Keratin konnte keine Sequenz zugeordnet werden, wahrscheinlich handelt es sich um dabei um das K8-Orthologe. Jedem der fünf Typ IE-Proteine konnte eine Sequenz zugeordnet werden (K10 bis K14), ebenso wie dem einzigen identifizierten Typ IIE-Keratin (K2). Von den Typ III-Proteinen wurden Desmin und Vimentin ihren Proteinflecken zugeordnet. Die nicht zugeordnete Sequenz aba-k1 codiert möglicherweise für ein IIE-Keratin, während aba-k15 vermutlich die Sequenz für ein IE-Keratin enthält. Bei den Proteinflecken, denen eine Sequenz zugeordnet werden konnten, kann für Aba-K2 die Zugehörigkeit zum IIE-Typ angenommen werden, während es sich bei Aba-K10 wahrscheinlich um ein IE-Keratin handelt.Durch Datenbankvergleiche und molekulare Stammbäume konnte die Zugehörigkeit der identifizierten Lamin-Sequenz zum B3-Subtyp der Vertebraten gezeigt werden.Die Daten der Biochemie und indirekten Immunfluoreszenzmikroskopie zeigen, daß Keratine in Epithelien und Vimentin in mesenchymalen Geweben vorkommen. Es existieren starke Hinweise, daß im letzten Gewebetyp Keratine auch koexprimiert werden. Desmin kommt in großen Mengen im Magen und im Mitteldarm vor und stellt dort das prominenteste Protein.Mit den gewonnenen Sequenzdaten wurden molekulare Stammbäume und Sequenzidentitäten berechnet. Die daraus resultierenden Konsequenzen für die Verwandtschaftsverhältnisse der verschiedenen IF-Proteine sowie der Wirbeltiere werden diskutiert.

Structure property relations in complex copolymer systems

A thorough investigation was made of the structure-property relation of well-defined statistical, gradient and block copolymers of various compositions. Among the copolymers studied were those which were synthesized using isobornyl acrylate (IBA) and n-butyl acrylate (nBA) monomer units. The copolymers exhibited several unique properties that make them suitable materials for a range of applications. The thermomechanical properties of these new materials were compared to acrylate homopolymers. By the proper choice of the IBA/nBA monomer ratio, it was possible to tune the glass transition temperature of the statistical P(IBA-co-nBA) copolymers. The measured Tg’s of the copolymers with different IBA/nBA monomer ratios followed a trend that fitted well with the Fox equation prediction. While statistical copolymers showed a single glass transition (Tg between -50 and 90 ºC depending on composition), DSC block copolymers showed two Tg’s and the gradient copolymer showed a single, but very broad, glass transition. PMBL-PBA-PMBL triblock copolymers of different composition ratios were also studied and revealed a microphase separated morphology of mostly cylindrical PMBL domains hexagonally arranged in the PBA matrix. DMA studies confirmed the phase separated morphology of the copolymers. Tensile studies showed the linear PMBL-PBA-PMBL triblock copolymers having a relatively low elongation at break that was increased by replacing the PMBL hard blocks with the less brittle random PMBL-r-PMMA blocks. The 10- and 20-arm PBA-PMBL copolymers which were studied revealed even more unique properties. SAXS results showed a mixture of cylindrical PMBL domains hexagonally arranged in the PBA matrix, as well as lamellar. Despite PMBL’s brittleness, the triblock and multi-arm PBA-PMBL copolymers could become suitable materials for high temperature applications due to PMBL’s high glass transition temperature and high thermal stability. The structure-property relation of multi-arm star PBA-PMMA block copolymers was also investigated. Small-angle X-ray scattering revealed a phase separated morphology of cylindrical PMMA domains hexagonally arranged in the PBA matrix. DMA studies found that these materials possess typical elastomeric behavior in a broad range of service temperatures up to at least 250°C. The ultimate tensile strength and the elastic modulus of the 10- and 20-arm star PBA-PMMA block copolymers are significantly higher than those of their 3-arm or linear ABA type counterparts with similar composition, indicating a strong effect of the number of arms on the tensile properties. Siloxane-based copolymers were also studied and one of the main objectives here was to examine the possibility to synthesize trifluoropropyl-containing siloxane copolymers of gradient distribution of trifluoropropyl groups along the chain. DMA results of the PDMS-PMTFPS siloxane copolymers synthesized via simultaneous copolymerization showed that due to the large difference in reactivity rates of 2,4,6-tris(3,3,3-trifluoropropyl)-2,4,6-trimethylcyclotrisiloxane (F) and hexamethylcyclotrisiloxane (D), a copolymer of almost block structure containing only a narrow intermediate fragment with gradient distribution of the component units was obtained. A more dispersed distribution of the trifluoropropyl groups was obtained by the semi-batch copolymerization process, as the DMA results revealed more ‘‘pure gradient type’’ features for the siloxane copolymers which were synthesized by adding F at a controlled rate to the polymerization of the less reactive D. As with trifluoropropyl-containing siloxane copolymers, vinyl-containing polysiloxanes may be converted to a variety of useful polysiloxane materials by chemical modification. But much like the trifluoropropyl-containing siloxane copolymers, as a result of so much difference in the reactivities between the component units 2,4,6-trivinyl-2,4,6-trimethylcyclotrisiloxane (V) and hexamethylcyclotrisiloxane (D), thermal and mechanical properties of the PDMS-PMVS copolymers obtained by simultaneous copolymerization was similar to those of block copolymers. Only the copolymers obtained by semi-batch method showed properties typical for gradient copolymers.

Hyperbranched polyglycerols as building blocks for complex amphiphilic structures: synthesis, characterization and applications

Among hyperbranched polymers, polyglycerol is one of the most promising and commonly used macromolecules due to its biocompatibility and versatility. However, the synthesis of high molecular weight polyglycerols still involves many intricacies and has only been understood to a limited extent. Furthermore, only few complex structures like star or block copolymers incorporating polyglycerol have been realized so far. Particularly biocompatible block copolymers are considered promising candidates for biomedical applications.rnThe scope of this thesis was the enhancement of the synthetic process leading to polyglycerol derivatives which implies improved molecular weight control for a broad molecular weight range as well as the assembly of more complex structures like amphiphilic block copolymers. Further insight into the relation between reaction solvent, degree of deprotonation during the ring-opening multibranching polymerization of glycidol and the characteristics of the obtained polymers were achieved within the scope of this work. Based on these results, a novel concept for the preparation of hyperbranched polyglycerols with molecular weights up to 20,000 g/mol was developed, applying a two step synthesis pathway. Starting from a partially deprotonated TMP core, low molecular weight hb-PGs were prepared using the known synthetic protocol that has been established since the late 1990ies. In a subsequent reaction sequence, these well defined polymers were used as hyperbranched macroinitiator cores in order to obtain high molecular weight hb-PGs with remarkably low polydispersity (Mw/Mn < 1.8). Molecular weight control was shown to be excellent and undesired low molecular weight side products were absent. Furthermore, the technique of continuous spin fractionation has been discovered as an efficient method for polyglycerol work-up to remove quantitatively residual monomer- and oligomer traces from hb-PG compositions to result in samples with significantly reduced polydispersities. Based on these results the synthesis of amphiphilic block copolymers containing hydrophilic hyperbranched polyglycerol blocks and linear, apolar poly(propylene oxide) blocks has been significantly improved and augmented to hb-PG-b-l-PPO-b-hb-PG ABA block copolymers. The influence of different polyglycerol-based amphiphiles on the fibril formation was studied by Thioflavin T Fluorescence showing remarkable increasing lag times which is promising in order to enhance the stability of this protein. In addition the first synthesis of poly(glyceryl glycerols) (PGG), introducing a new solketyl glycidyl ether monomer (IGG) was shown. It was furthermore demonstrated that core-functional carbosilane wedges allow application in block copolymer synthesis. Bisglycidolized amine functional polymers were successfully employed as macroinitiators for glycidol polymerization. This resulted in the first example of amphiphilic hyperbranched-hyperbranched polymer structures. Finally, it has been shown that the previously reported synthetic pathway to carboxylated hyperbranched polyglycerol polyelectrolytes can also be applied for the amphiphilic linear-hyperbranched block copolymers. These novel biocompatible and highly amphiphilic polyelectrolytes offer great potential for further investigations. rnrn