Progetto e valutazione di una piattaforma sperimentale di Internet of Energy per veicoli elettrici

This dissertation deals with the development of a project concerning a demonstration in the scope of the Supply Chain 6 of the Internet of Energy (IoE) project: the Remote Monitoring Emulator, which bears my personal contribution in several sections. IoE is a project of international relevance, that means to establish an interoperability standard as regards the electric power production and utilization infrastructure, using Smart Space platforms. The future perspectives of IoE have to do with a platform for electrical power trade-of, the Smart Grid, whose energy is produced by decentralized renewable sources and whose services are exploited primarily according to the Internet of Things philosophy. The main consumers of this kind of smart technology will be Smart Houses (that is to say, buildings controlled by an autonomous system for electrical energy management that is interoperable with the Smart Grid) and Electric Mobility, that is a smart and automated management regarding movement and, overall, recharging of electrical vehicles. It is precisely in the latter case study that the project Remote Monitoring Emulator takes place. It consists in the development of a simulated platform for the management of an electrical vehicle recharging in a city. My personal contribution to this project lies in development and modeling of the simulation platform, of its counterpart in a mobile application and implementation of a city service prototype. This platform shall, ultimately, make up a demonstrator system exploiting the same device which a real user, inside his vehicle, would use. The main requirements that this platform shall satisfy will be interoperability, expandability and relevance to standards, as it needs to communicate with other development groups and to effectively respond to internal changes that can affect IoE.

Simulazioni Software-In-the-Loop per la verifica funzionale di un sistema di tracking satellitare (ALMATracker)

L'ALMATracker è un sistema di puntamento per la stazione di terra di ALMASat-1. La sua configurazione non segue la classica Azimuth-Elevazione, bensì utilizza gli assi α-β per evitare punti di singolarità nelle posizioni vicino allo zenit. Ancora in fase di progettazione, utilizzando in congiunta SolidWorks e LabVIEW si è creato un Software-in-the-loop per la sua verifica funzionale, grazie all'utilizzo del relativamente nuovo pacchetto NI Softmotion. Data la scarsa esperienza e documentazione che si hanno su questo recente tool, si è prima creato un Case Study che simulasse un sistema di coordinate cilindriche in modo da acquisire competenza. I risultati conseguiti sono poi stati sfruttati per la creazione di un SIL per la simulazione del movimento dell'ALMATracker. L'utilizzo di questa metodologia di progettazione non solo ha confermato la validità del design proposto, ma anche evidenziato i problemi e le potenzialità che caratterizzano questo pacchetto software dandone un analisi approfondita.

Realizzazione di un'interfaccia universale in tecnologia Bluetooth Low Energy per sensori integrati

Lo scopo dell’elaborato di tesi è la progettazione e lo sviluppo di un’applicazione per il modulo Bluetooth Low Energy (BLE) Texas Instrument CC2650 in grado di leggere le informazioni da un sensore analogico, tramite un Analog-Digital- Converter (ADC), e di scambiare i dati con uno smartphone Android in tempo reale. L’interfaccia realizzata deve essere universale, ovvero dovrà essere compatibile con sensori di diverso tipo, facilmente estensibile per l’aggiunta di un numero maggiore di periferiche di lettura e utilizzabile con un ampio numero di dispositivi.

Sistemi per la climatizzazione mediante pompe di calore geotermiche e pali energetici

We need a large amount of energy to make our homes pleasantly warm in winter and cool in summer. If we also consider the energy losses that occur through roofs, perimeter walls and windows, it would be more appropriate to speak of waste than consumption. The solution would be to build passive houses, i.e. buildings more efficient and environmentally friendly, able to ensure a drastic reduction of electricity and heating bills. Recently, the increase of public awareness about global warming and environmental pollution problems have “finally” opened wide possibility in the field of sustainable construction by encouraging new renewable methods for heating and cooling space. Shallow geothermal allows to exploit the renewable heat reservoir, present in the soil at depths between 15 and 20 m, for air-conditioning of buildings, using a ground source heat pump. This thesis focuses on the design of an air-conditioning system with geothermal heat pump coupled to energy piles, i.e. piles with internal heat exchangers, for a typical Italian-family building, on the basis of a geological-technical report about a plot of Bologna’s plain provided by Geo-Net s.r.l. The study has involved a preliminary static sizing of the piles in order to calculate their length and number, then the project was completed making the energy sizing, where it has been verified if the building energy needs were met with the static solution obtained. Finally the attention was focused on the technical and economical validity compared to a traditional system (cost-benefit analysis) and on the problem of the uncertainty data design and their effects on the operating and initial costs of the system (sensitivity analysis). To evaluate the performance of the thermal system and the potential use of the piles was also used the PILESIM2 software, designed by Dr. Pahud of the SUPSI’s school.

Evaluation of the power production performance of the wavepiston, wave energy converter

In the early 1970 the community has started to realize that have as a main principle the industry one, with the oblivion of the people and health conditions and of the world in general, it could not be a guideline principle. The sea, as an energy source, has the characteristic of offering different types of exploitation, in this project the focus is on the wave energy. Over the last 15 years the Countries interested in the renewable energies grew. Therefore many devices have came out, first in the world of research, then in the commercial one; these converters are able to achieve an energy transformation into electrical energy. The purpose of this work is to analyze the efficiency of a new wave energy converter, called WavePiston, with the aim of determine the feasibility of its actual application in different wave conditions: from the energy sea state of the North Sea, to the more quiet of the Mediterranean Sea. The evaluation of the WavePiston is based on the experimental investigation conducted at the University of Aalborg, in Denmark; and on a numerical modelling of the device in question, to ascertain its efficiency regardless the laboratory results. The numerical model is able to predict the laboratory condition, but it is not yet a model which can be used for any installation, in fact no mooring or economical aspect are included yet. È dai primi anni del 1970 che si è iniziato a capire che il solo principio dell’industria con l’incuranza delle condizioni salutari delle persone e del mondo in generale non poteva essere un principio guida. Il mare, come fonte energetica, ha la caratteristica di offrire diverse tipologie di sfruttamento, in questo progetto è stata analizzata l’energia da onda. Negli ultimi 15 anni sono stati sempre più in aumento i Paesi interessati in questo ambito e di conseguenza, si sono affacciati, prima nel mondo della ricerca, poi in quello commerciale, sempre più dispositivi atti a realizzare questa trasformazione energetica. Di tali convertitori di energia ondosa ne esistono diverse classificazioni. Scopo di tale lavoro è analizzare l’efficienza di un nuovo convertitore di energia ondosa, chiamato WavePiston, al fine si stabilire la fattibilità di una sua reale applicazione in diverse condizioni ondose: dalle più energetiche del Mare del Nord, alle più quiete del Mar Mediterraneo. La valutazione sul WavePiston è basata sullo studio sperimentale condotto nell’Università di Aalborg, in Danimarca; e su di una modellazione numerica del dispositivo stesso, al fine di conoscerne l’efficienza a prescindere dalla possibilità di avere risultati di laboratorio. Il modello numerico è in grado di predirre le condizioni di laboratorio, ma non considera ancora elementi come gli ancoraggi o valutazione dei costi.

Nuovi processi catalitici per la produzione di syngas

The study of the combined Steam/Dry Reforming (S/DR) process for the production of syngas (CO + H2) from clean biogas was carried out using Ni/Ir bimetallic catalysts on Mg and Al mixed-oxides, obtained by calcination of hydrotalcite-type precursors (Ht) prepared by co-precipitation. The presence of small amounts of Ir promoted the catalytic activity and limited the deactivation phenomena through the formation of a bimetallic alloy, which does the catalyst very active even at lowest temperature and in lack of steam. By integrating a High Temperature–WGS unit (HTS) after the S/DR reactor it was possible to increase the H2 yield of the process. The performance of the Zn/Al/Cu-based catalyst was improved using a templating agent during the synthesis of the catalyst, which increased the catalyst’s structural properties and activity especially at lowest temperatures and at highest contact times. Finally, starting from the laboratory data, it was possible to simulate the S/DR process on industrial scale, evaluating its scalability and environmental impact. The results showed that, using the S/DR technology instead of the current processes, it was possible to reduce the energy costs and the atmospheric emissions of the plant.

Sintesi e caratterizzazione di CaCu3Ti4O12 (CCTO) per applicazioni in fotoelettrocatalisi

A promising strategy to mitigate both the energy crisis and global warming is the development of solar fuels and chemicals using as feedstock CO2 in combination with simple molecules such as water. This process stores the solar energy into chemical bonds, leading to a carbon-neutral approach of fuels and chemicals production. Aim of this thesis was the synthesis and characterization of CaCu3Ti4O12 (CCTO)- based compounds to be used as visible light photocatalyst for CO2 to chemical conversion. Different compositions were produced doping CCTO with increasing concentration of iron into the perovskite’s A site in order to identify the materials with the highest photo- and photoelectrocatalytic properties. The most promising compositions were used to produce photoelectrodes by screen printing that were characterized by linear and cyclic voltammetry, impedance spectroscopy and Mott-Schottky analysis to evaluate the electrical conductivity and calculate the flat band potential and the number of charge carriers in the samples. The photoelectrodes were then tested in a photoelectrochemical (PEC) cell for the conversion of CO2 into fuel and chemicals. The results obtained confirm that CCTO-based materials can be considered promising materials for carbon dioxide photo-electrochemical reduction.

Sintesi e caratterizzazione di materiali polimerici water-soluble per applicazioni nel campo del fotovoltaico organico

The need to use renewable energy sources, due to the massive production of pollution for the energy production, has led to the development of new technologies for the use of solar energy. The purpose of this thesis project is to synthesize and characterize new thiophene-based polymeric materials processable in water, a green solvent, for the construction of organic solar cells, promising and versatile devices used for the production of electric energy. For this, a highly regioregular polymer was synthesized through GRIM polymerization (Grignard Metathesis Polymerization) on which a study was performed to identify the optimal reaction time.

Analysis of the impact of stationary energy storage systems in trolleybus grids using Simulink-based modelling

The voltage profile of the catenary between traction substations (TSSs) is affected by the trolleybus current intake and by its position with respect to the TSSs: the higher the current requested by the bus and the further the bus from the TSSs, the deeper the voltage drop. When the voltage drops below 500V, the trolleybus is forced to decrease its consumption by reducing its input current. This thesis deals with the analysis of the improvements that the installation of an BESS produces in the operation of a particularly loaded FS of the DC trolleybus network of the city of Bologna. The stationary BESS is charged by the TSSs during off-peak times and delivers the stored energy when the catenary is overloaded alleviating the load on the TSSs and reducing the voltage drops. Only IMC buses are considered in the prospect of a future disposal of all internal combustion engine vehicles. These trolleybuses cause deeper voltage drops because they absorb enough current to power their traction motor and recharge the on board battery. The control of the BESS aims to keep the catenary voltage within the admissible voltage range and makes sure that all physical limitations are met. A model of FS Marconi Trento Trieste is implemented in Simulink environment to simulate its daily operation and compare the behavior of the trolleybus network with and without BESS. From the simulation without BESS, the best location of the energy storage system is deduced, and the battery control is tuned. Furthermore, from the knowledge of the load curve and the battery control trans-characteristic, it is formulated a prediction of the voltage distribution at BESS connection point. The prediction is then compared with the simulation results to validate the Simulink model. The BESS allows to decrease the voltage drops along the catenary, the Joule losses and the current delivered by the TSSs, indicating that the BESS can be a solution to improve the operation of the trolleybus network.

Evaluation of Th and U contamination in the CUORE experiment using a delayed coincidence analysis

The discovery of the neutrino mass is a direct evidence of new physics. Several questions arise from this observation, regarding the mechanism originating the neutrino masses and their hierarchy, the violation of lepton number conservation and the generation of the baryon asymmetry. These questions can be addressed by the experimental search for neutrinoless double beta (0\nu\beta\beta) decay, a nuclear decay consisting of two simultaneous beta emissions without the emission of two antineutrinos. 0\nu\beta\beta decay is possible only if neutrinos are identical to antineutrinos, namely if they are Majorana particles. Several experiments are searching for 0\nu\beta\beta decay. Among these, CUORE is employing 130Te embedded in TeO_2 bolometric crystals. It needs to have an accurate understanding of the background contribution in the energy region around the Q-value of 130Te. One of the main contributions is given by particles from the decay chains of contaminating nuclei (232Th, 235-238U) present in the active crystals or in the support structure. This thesis uses the 1 ton yr CUORE data to study these contamination by looking for events belonging to sub-chains of the Th and U decay chains and reconstructing their energy and time difference distributions in a delayed coincidence analysis. These results in combination with studies on the simulated data are then used to evaluate the contaminations. This is the first time this analysis is applied to the CUORE data and this thesis highlights the feasibility of it while providing a starting point for further studies. A part of the obtained results agrees with ones from previous analysis, demonstrating that delayed coincidence searches might improve the understanding of the CUORE experiment background. This kind of delayed coincidence analysis can also be reused in the future once the, CUORE upgrade, CUPID data will be ready to be analyzed, with the aim of improving the sensitivity to the 0\nu\beta\beta decay of 100Mo.