Experimental characterization of carbon-fiber-reinforced polymer laminates

The goal of this thesis is to make static tensile test on four Carbon Fiber Reinforced Polymer laminates, in such a way as to obtain the ultimate tensile strength of these laminates; in particular, the laminates analyzed were produced by Hand Lay-up technology. Testing these laminates we have a reference point on which to compare other laminates and in particular CFRP laminate produced by RTM technology.

Strength development of single beech wood veneers considering different climate conditions

La tesi di laurea è stata svolta presso l’Università di Scienze Applicate di Rosenheim, in Germania; il progetto di ricerca si basa sulla tecnica di rinforzo conosciuta come “Soil Nailing”, che consiste nella costruzione di un’opera di sostegno nella realizzazione di pareti di scavo o nel consolidamento di versanti instabili. L’obiettivo principale dell’elaborato sarà quello di valutare la fattibilità dell’impiego di tubi fabbricati con legno di faggio, in sostituzione dei chiodi d’acciaio comunemente utilizzati; la scelta di questo tipo di legno è dettata dalla larga disponibilità presente in Germania. La sollecitazione principale su tali tubi sarà di trazione parallela alla fibratura, tramite test sperimentali è stato possibile valutare tale resistenza nelle diverse condizioni in cui si verrà a trovare il tubo dopo l’installazione nel terreno. A tal proposito è necessario specificare che, l’indagine per risalire all’influenza che le condizioni ambientali esercitano sull’elemento, verrà condotta su provini costituiti da un singolo strato di legno; in tal modo si può apprezzare l’influenza direttamente sull’elemento base e poi risalire al comportamento globale. I dati ottenuti dall’indagine sperimentale sono stati elaborati tramite la teoria di Weibull, largamente utilizzata in tecnologia dei materiali per quanto riguarda materiali fragili come il legno; tali distribuzioni hanno permesso la determinazione della resistenza caratteristica dei provini per ogni condizione ambientale d’interesse. Per quanto riguarda la valutazione della fattibilità dell’uso di tubi in legno in questa tecnica di consolidamento, è stato eseguito il dimensionamento del tubo, utilizzando i dati a disposizione ottenuti dall’indagine sperimentale eseguita; ed infine sono state eseguite le verifiche di stabilità dell’intervento.

Rheological Characterization of Bitumen and Asphalt including the effect of Added-recycled Material

This thesis evaluates the rheological behaviour of asphalt mixtures and the corresponding extracted binders from the mixtures containing different amounts of Reclaimed Asphalt (RA). Generally, the use of RA is limited to certain amounts. The study materials are Stone Mastic Asphalts including a control sample with 0% RA, and other samples with RA rates of 30%, 60% and 100%. Another set of studied mixtures are Asphalt Concretes (AC) types with again a control mix having 0% RA rate and the other mixtures designs containing 30%, 60% and 90% of reclaimed asphalt which also contain additives. In addition to the bitumen samples extracted from asphalt mixes, there are bitumen samples directly extracted from the original RA. To characterize the viscoelastic behaviour of the binders, Dynamic Shear Rheometer (DSR) tests were conducted on bitumen specimens. The resulting influence of the RA content in the bituminous binders are illustrated through master curves, black diagrams and Cole-Cole plots with regressing these experimental data by the application of the analogical 2S2P1D and the analytical CA model. The advantage of the CA model is in its limited number of parameters and thus is a simple model to use. The 2S2P1D model is an analogical rheological model for the prediction of the linear viscoelastic properties of both asphalt binders and mixtures. In order to study the influence of RA on mixtures, the Indirect Tensile Test (ITT) has been conducted. The master curves of different mixture samples are evaluated by regressing the test data points to a sigmoidal function and subsequently by comparing the master curves, the influence of RA materials is studied. The thesis also focusses on the applicability and also differences of CA model and 2S2P1D model for bitumen samples and the sigmoid function for the mixtures and presents the influence of the RA rate on the investigated model parameters.

Crack measurements in structural concrete with D.I.C. system and validation of a tensile constitutive law

Compared with other mature engineering disciplines, fracture mechanics of concrete is still a developing field and very important for structures like bridges subject to dynamic loading. An historical point of view of what done in the field is provided and then the project is presented. The project presents an application of the Digital Image Correlation (DIC) technique for the detection of cracks at the surface of concrete prisms (500mmx100mmx100mm) subject to flexural loading conditions (Four Point Bending test). The technique provide displacement measurements of the region of interest and from this displacement field information about crack mouth opening (CMOD) are obtained and related to the applied load. The evolution of the fracture process is shown through graphs and graphical maps of the displacement at some step of the loading process. The study shows that it is possible with the DIC system to detect the appearance and evolution of cracks, even before the cracks become visually detectable.