Atmospheric corrosion of quaternary bronzes (Cu-Sn-Zn-Pb): laboratory tests (accelerated ageing in wet & dry conditions)and field studies (the Bottego monument in Parma, Italy).

The interactions between outdoor bronzes and the environment, which lead to bronze corrosion, require a better understanding in order to design effective conservation strategies in the Cultural Heritage field. In the present work, investigations on real patinas of the outdoor monument to Vittorio Bottego (Parma, Italy) and laboratory studies on accelerated corrosion testing of inhibited (by silane-based films, with and without ceria nanoparticles) and non-inhibited quaternary bronzes are reported and discussed. In particular, a wet&dry ageing method was used both for testing the efficiency of the inhibitor and for patinating bronze coupons before applying the inhibitor. A wide range of spectroscopic techniques has been used, for characterizing the core metal (SEM+EDS, XRF, AAS), the corroded surfaces (SEM+EDS, portable XRF, micro-Raman, ATR-IR, Py-GC-MS) and the ageing solutions (AAS). The main conclusions were: 1. The investigations on the Bottego monument confirmed the differentiation of the corrosion products as a function of the exposure geometry, already observed in previous works, further highlighting the need to take into account the different surface features when selecting conservation procedures such as the application of inhibitors (i.e. the relative Sn enrichment in unsheltered areas requires inhibitors which effectively interact not only with Cu but also with Sn). 2. The ageing (pre-patination) cycle on coupons was able to reproduce the relative Sn enrichment that actually happens in real patinated surfaces, making the bronze specimens representative of the real support for bronze inhibitors. 3. The non-toxic silane-based inhibitors display a good protective efficiency towards pre-patinated surfaces, differently from other widely used inhibitors such as benzotriazole (BTA) and its derivatives. 4. The 3-mercapto-propyl-trimethoxy-silane (PropS-SH) additivated with CeO2 nanoparticles generally offered a better corrosion protection than PropS-SH.

Proprieta elettriche e ottiche di film di ge impiantati con sn.

In questo lavoro di tesi vengono studiate le proprietà ottiche ed elettriche di film sottili di germanio, impiantati con ioni stagno. I campioni, realizzati tramite tecnica CVD (\emph{Chemical Vapor Deposition}), sono stati realizzati in condizioni operative differenti, il che ha permesso di ottenere materiali con proprietà strutturali e fisiche diverse. Si è posta particolare attenzione alla presenza di strutture nanoporose, presenti in alcuni di questi campioni, che possono dar vita ad effetti di confinamento quantico, associato ad uno spostamento dell'energy gap rispetto al materiale bulk. Le analisi sono state effettuate sia tramite misure SPV (\emph{Surface Photovoltage}), che hanno permesso di indagare le proprietà ottiche, sia tramite tecnica IV (\emph{corrente-tensione}), volta ad evidenziare le proprietà elettriche dei diversi campioni. I risultati ottenuti sono, infine, stati confrontati con un campione di riferimento di film di germanio non impiantato, mettendone in luce le differenze strutturali e fisiche. Lo studio di questo materiale, oltre ad avere un'importanza di carattere fondamentale, è di interesse anche per le possibili ricadute applicative. Infatti, i materiali nanoporosi possono essere impiegati in vari campi, come ad esempio nell'elettronica, nello sviluppo di pannelli fotovoltaici e nella purificazione di gas e liquidi.

Mechanochemical solvent-free synthesis of Sn-β Zeolite and Ag2O/TiO2 catalysts

Preparations of heterogeneous catalysts are usually complex processes that involve several procedures as precipitation, crystallization and hydrothermal treatments. This processes are really dependent by the operative conditions such as temperature, pH, concentration etc. Hence the resulting product is extremely affected by any possible variations in these parameters making this synthesis really fragile. With the aim to improve these operations has been decided to exploit a new possible strong environment-respectful process by mechanochemical treatment, which permits to carry out solvent free-solvent synthesis exploiting the Mixer Mill MM400 (Retsch) in order to have reproducible results. Two different systems have been studied in this kind of synthesis: a tin β -zeolite tested in a H-trasnfer reaction of cyclohexanone and a silver on titania catalyst used in the fluorination of 2,2 dimethyl glucaric acid. Each catalyst has been characterized by different techniques in order to understand the transformations involved in the mechanochemical treatment.