User centered retrofit: The case of kadk campus, Copenhagen, (dk)

The following research thesis is about a retrofit project made in Denmark, Copenhagen, and carried out on one of the buildings belonging to the Royal Danish Academy. The key assumption and base of the entire research process is that, up to now, the standard procedure in retrofit cases like this provides as comparative method between de facto and design, the use of Energy Simulation software. These programs generally divide the space into different thermal zones, assigning to each of them different levels of employment, activities, set-point temperatures set for cooling and heating analysis and so on, but always providing average and constant values, usually taken in the middle point of the single thermal zone. Therefore, the project and its research path stems from the attempt to investigate the potentialities of this kind of designing for retrofit process, as previously anticipated not antithetical but complementary to that classic energy-based retrofit, thus passing from the building scale, and all its thermal zones, to the users' scale, related to humans and microclimates. The main software used in this process is Autodesk Simulation CFD. The idea behind the project is that in certain situations, for example, it will not be necessary to add throughout insulation layers (previously parameterized and optimized with Design Builder), and that even in Winter conditions, due maybe to the users' activities, the increased level of clothing (clo) and the heat produced by equipments, thermal comfort could be achieved also in areas characterized by considerably lower MRT. After the analysis of the State of Art and its simulations, the project has still been supported by the tool itself, the CFD Software, in an iterative process aimed at achieving visible improvements in terms of MRT, on spaces with different needs and characteristics, both in Winter and Summer regimes.

Caratterizzazione sperimentale di cicli di cottura di un forno domestico ad incasso

L'obiettivo di questa tesi era caratterizzare il forno dell'Electrolux, andando a capire quali fossero i fenomeni di scambio termico presenti all'interno della cavità durante le diverse modalità di funzionamento (statico e ventilato) ed al variare del set-point. Tale obiettivo è stato raggiunto in maniera graduale: inizialmente si è caratterizzato il forno a vuoto e, successivamente, è stato utilizzato un "mattone standard" che simulasse la reale presenza del cibo. Quest'ultimo passo è stato realizzato seguendo la normativa "TM SP000003129 - EU Energy Consumption Test for Electric Ovens" relativa alla determinazione dell'indice di efficienza del forno. Mentre il primo obiettivo è stato raggiunto con successo, la determinazione dell'indice di efficienza è stata influenzata da parametri non controllabili, facendo si che i risultati ottenuti non corrispondessero a quelli dichiarati dalla casa costruttrice.

The contribution of the Finite Volume Point Dilution Method to the determination of solute mass flux in an alluvial aquifer.

Groundwater represents one of the most important resources of the world and it is essential to prevent its pollution and to consider remediation intervention in case of contamination. According to the scientific community the characterization and the management of the contaminated sites have to be performed in terms of contaminant fluxes and considering their spatial and temporal evolution. One of the most suitable approach to determine the spatial distribution of pollutant and to quantify contaminant fluxes in groundwater is using control panels. The determination of contaminant mass flux, requires measurement of contaminant concentration in the moving phase (water) and velocity/flux of the groundwater. In this Master Thesis a new solute flux mass measurement approach, based on an integrated control panel type methodology combined with the Finite Volume Point Dilution Method (FVPDM), for the monitoring of transient groundwater fluxes, is proposed. Moreover a new adsorption passive sampler, which allow to capture the variation of solute concentration with time, is designed. The present work contributes to the development of this approach on three key points. First, the ability of the FVPDM to monitor transient groundwater fluxes was verified during a step drawdown test at the experimental site of Hermalle Sous Argentau (Belgium). The results showed that this method can be used, with optimal results, to follow transient groundwater fluxes. Moreover, it resulted that performing FVPDM, in several piezometers, during a pumping test allows to determine the different flow rates and flow regimes that can occurs in the various parts of an aquifer. The second field test aiming to determine the representativity of a control panel for measuring mass flus in groundwater underlined that wrong evaluations of Darcy fluxes and discharge surfaces can determine an incorrect estimation of mass fluxes and that this technique has to be used with precaution. Thus, a detailed geological and hydrogeological characterization must be conducted, before applying this technique. Finally, the third outcome of this work concerned laboratory experiments. The test conducted on several type of adsorption material (Oasis HLB cartridge, TDS-ORGANOSORB 10 and TDS-ORGANOSORB 10-AA), in order to determine the optimum medium to dimension the passive sampler, highlighted the necessity to find a material with a reversible adsorption tendency to completely satisfy the request of the new passive sampling technique.