Outdoor bronze conservation: assessment of protective treatments by accelerated aging and of treatment removal procedures by laser cleaning

Outdoor bronzes exposed to the environment form naturally a layer called patina, which may be able to protect the metallic substrate. However, since the last century, with the appearance of acid rains, a strong change in the nature and properties of the copper based patinas occurred [1]. Studies and general observations have established that bronze corrosion patinas created by acid rain are not only disfiguring in terms of loss of detail and homogeneity, but are also unstable [2]. The unstable patina is partially leached away by rainwater. This leaching is represented by green streaking on bronze monuments [3]. Because of the instability of the patina, conservation techniques are usually required. On a bronze object exposed to the outdoor environment, there are different actions of the rainfall and other atmospheric agents as a function of the monument shape. In fact, we recognize sheltered and unsheltered areas as regards exposure to rainwater [4]. As a consequence of these different actions, two main patina types are formed on monuments exposed to the outdoor environment. These patinas have different electrochemical, morphological and compositional characteristics [1]. In the case of sheltered areas, the patina contains mainly copper products, stratified above a layer strongly enriched in insoluble Sn oxides, located at the interface with the uncorroded metal. Moreover, different colors of the patina result from the exposure geometry. The surface color may be pale green for unsheltered areas, and green and mat black for sheltered areas [4]. Thus, in real outdoor bronze monuments, the corrosion behavior is strongly influenced by the exposure geometry. This must be taken into account when designing conservation procedures, since the patina is in most cases the support on which corrosion inhibitors are applied. Presently, for protecting outdoor bronzes against atmospheric corrosion, inhibitors and protective treatments are used. BTA and its derivatives, which are the most common inhibitors used for copper and its alloy, were found to be toxic for the environment and human health [5, 6]. Moreover, it has been demonstrated that BTA is efficient when applied on bare copper but not as efficient when applied on bare bronze [7]. Thus it was necessary to find alternative compounds. Silane-based inhibitors (already successfully tested on copper and other metallic substrates [8]), were taken into consideration as a non-toxic, environmentally friendly alternative to BTA derivatives for bronze protection. The purpose of this thesis was based on the assessment of the efficiency of a selected compound, to protect the bronze against corrosion, which is the 3-mercapto-propyl-trimethoxy-silane (PropS-SH). It was selected thanks to the collaboration with the Corrosion Studies Centre “Aldo Daccò” at the Università di Ferrara. Since previous studies [9, 10, 11] demonstrated that the addition of nanoparticles to silane-based inhibitors leads to an increase of the protective efficiency, we also wanted to evaluate the influence of the addition of CeO2, La2O3, TiO2 nanoparticles on the protective efficiency of 3-mercapto-propyl-trimethoxy-silane, applied on pre-patinated bronze surfaces. This study is the first section of the thesis. Since restorers have to work on patinated bronzes and not on bare metal (except for contemporary art), it is important to be able to recreate the patina, under laboratory conditions, either in sheltered or unsheltered conditions to test the coating and to obtain reliable results. Therefore, at the University of Bologna, different devices have been designed to simulate the real outdoor conditions and to create a patina which is representative of real application conditions of inhibitor or protective treatments. In particular, accelerated ageing devices by wet & dry (simulating the action of stagnant rain in sheltered areas [12]) and by dropping (simulating the leaching action of the rain in unsheltered areas [1]) tests were used. In the present work, we used the dropping test as a method to produce pre-patinated bronze surfaces for the application of a candidate inhibitor as well as for evaluating its protective efficiency on aged bronze (unsheltered areas). In this thesis, gilded bronzes were also studied. When they are exposed to the outside environment, a corrosion phenomenon appears which is due to the electrochemical couple gold/copper where copper is the anode. In the presence of an electrolyte, this phenomenon results in the formation of corrosion products than will cause a blistering of the gold (or a break-up and loss of the film in some cases). Moreover, because of the diffusion of the copper salts to the surface, aggregates and a greenish film will be formed on the surface of the sample [13]. By coating gilded samples with PropS-SH and PropS-SH containing nano-particles and carrying out accelerated ageing by the dropping test, a discussion is possible on the effectiveness of this coating, either with nano-particles or not, against the corrosion process. This part is the section 2 of this thesis. Finally, a discussion about laser treatment aiming at the assessment of reversibility/re-applicability of the PropS-SH coating can be found in section 3 of this thesis. Because the protective layer loses its efficiency with time, it is necessary to find a way of removing the silane layer, before applying a new one on the “bare” patina. One request is to minimize the damages that a laser treatment would create on the patina. Therefore, different laser fluences (energy/surface) were applied on the sample surface during the treatment process in order to find the best range of fluence. In particular, we made a characterization of surfaces before and after removal of PropS-SH (applied on a naturally patinated surface, and subsequently aged by natural exposure) with laser methods. The laser removal treatment was done by the CNR Institute of Applied Physics “Nello Carrara” of Sesto Fiorentino in Florence. In all the three sections of the thesis, a range of non-destructive spectroscopic methods (Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), μ-Raman spectroscopy, X-Ray diffractometry (XRD)) were used for characterizing the corroded surfaces. AAS (Atomic Absorption Spectroscopy) was used to analyze the ageing solutions from the dropping test in sections 1 and 2.

Studio della distribuzione del segnale misurato dal rivelatore a tempo di volo (tof) di alice e di nuovi algoritmi per la sua ottimizzazione

Questa tesi si propone di investigare l'origine di effetti non gaussiani nella distribuzione del segnale del rivelatore Time of Flight (TOF) dell'esperimento A Large Ion Collider Experiment (ALICE). Con la presa dati iniziata nel 2009 si è infatti osservata un'asimmetria nel segnale la cui origine è ancora oggetto di studio. L'analisi svolta mostra come essa sia dovuta a motivi strumentali piuttosto che fenomenologici e permette quindi di correggere in parte questa anomalia migliorando la risoluzione del rivelatore. ALICE è uno dei quattro esperimenti allestiti lungo l'anello del LHC e ha come obiettivo principale verificare l'esistenza di prove sperimentali che confermino l'esistenza di un nuovo stadio della materia, il cosiddetto Quark Gluon Plasma (QGP). Secondo la Cromodinamica Quantistica (QCD), la teoria che descrive l'interazione forte, caratteristica fondamentale di quark e gluoni è il loro confinamento all'interno di adroni. Studi recenti nell'ambito della QCD non-perturbativa hanno tuttavia dimostrato che in condizioni estreme di densità di materia adronica e temperatura sarebbe possibile un'inversione di tendenza nell'andamento della costante di accoppiamento forte. Le condizioni necessarie alla formazione del QGP sono ben riproducibili nelle collisioni ad energie ultrarelativistiche tra ioni pesanti, come quelle che sono state prodotte a LHC negli ultimi due anni, fra ioni di piombo con energie del centro di massa pari a 2.76 TeV per coppia di nucleoni. L'esperimento ALICE si propone di studiarne i prodotti e poiché la molteplicità di particelle che si generano nell'urto e considerevole, e necessario un sistema di rivelazione che permetta l'identificazione di particelle cariche su un grande angolo solido e in un ampio intervallo di impulsi. Il TOF, utilizzando un particolare rivelatore a gas detto Multigap Resistive Plate Chamber (MRPC), svolge brillantemente questo compito permettendo di raggiungere una risoluzione temporale inferiore ai 100 ps.

Charge and spin transport in memristive La0.7Sr0.3Mno3/SrTiO3/Co devices

Il lavoro svolto si concentra sul trasporto di carica e spin in dispositivi trilayer La0.7Sr0.3MnO3/SrTiO3/Co multifunzionali. Questi dispositivi mostrano sia magnetoresistenza che resistive switching, con un'interessante interazione fra i due effetti. Le giunzioni SrTiO3 sono state scelte per questo lavoro sia per via dei precedenti studi su SrTiO3 come barriera in dispositivi spintronici (cioè dispositivi con magnetoresistenza), sia perché sono promettenti come materiale base per costruire memristor (cioè dispositivi con resistive switching). Il lavoro di tesi è stato svolto all'Istituto per lo studio dei materiali nanostrutturati (ISMN-CNR) a Bologna. Nella prima parte di questa tesi illustrerò la fisica dietro al resistive switching e alla magnetoresistenza di dispositivi trilayer, mostrando anche risultati di studi su dispositivi simili a quelli da me studiati. Nella seconda parte mostrerò la complessa fisica degli ossidi utilizzati nei nostri dispositivi e i possibili meccanismi di trasporto attraverso essi. Nell'ultima parte descriverò i risultati ottenuti. I dispositivi La0.7Sr0.3MnO3/SrTiO3/Co sono stati studiati tramite caratterizzazione elettrica, di magnetotrasporto e con spettroscopia di impedenza. Le misure ottenute hanno mostrato una fisica molto ricca dietro al trasporto di spin e carica in questi dispositivi, e la mutua interazione fra fenomeni spintronici e di resistive switching rappresenta una chiave per comprendere la fisica di questi fenomeni. Analisi dati della dipendenza della resistenza della temperature e caratteristiche corrente-tensioni saranno usati per quantificare e descrivere il trasporto in questi dispositivi.

Proposal of a Continuous Read-out Implementation in the ALICE-TOF detector

The main purpose of ultrarelativistic heavy-ion collisions is the investigation of the QGP. The ALICE experiment situated at the CERN has been specifically designed to study heavy-ion collisions for centre-of-mass energies up to 5.5 per nucleon pair. Extended particle identification capability is one of the main characteristics of the ALICE experiment. In the intermediate momentum region (up to 2.5 GeV/c for pi/K and 4 GeV/c for K/p), charged particles are identified in the ALICE experiment by the Time of Flight (TOF) detector. The ALICE-TOF system is a large-area detector based on the use of Multi-gap Resistive Plate Chamber (MRPC) built with high efficiency, fast response and intrinsic time resolution better than 40 ps. This thesis work, developed with the ALICE-TOF Bologna group, is part of the efforts carried out to adapt the read-out of the detector to the new requirements after the LHC Long Shutdown 2. Tests on the feasibility of a new read-out scheme for the TOF detector have been performed. In fact, the achievement of a continuous read-out also for the TOF detector would not be affordable if one considers the replacement of the TRM cards both for hardware and budget reasons. Actually, the read-out of the TOF is limited at 250 kHz i.e. it would be able to collect up to just a fourth of the maximum collision rate potentially achievable for pp interactions. In this Master’s degree thesis work, I discuss a different read-out system for the ALICE-TOF detector that allows to register all the hits at the interaction rate of 1 MHz foreseen for pp interactions after the 2020, by using the electronics currently available. Such solution would allow the ALICE-TOF detector to collect all the hits generated by pp collisions at 1 MHz interaction rate, which corresponds to an amount four times larger than that initially expected at such frequencies with the triggered read-out system operated at 250 kHz for LHC Run 3. The obtained results confirm that the proposed read-out scheme is a viable option for the ALICE TOF detector. The results also highlighted that it will be advantageous if the ALICE-TOF group also implement an online monitoring system of noisy channels to allow their deactivation in real time.