Effetto dei tamponamenti sulla risposta dinamica di un edificio in cemento armato

Nella presente tesi viene esaminato il comportamento dinamico un edificio a struttura intelaiata in cemento armato, focalizzando l’attenzione sull’interferenza esercitata dai tamponamenti e dai tramezzi non portanti. Le murature non portanti sono modellate come bielle equivalenti, la cui rigidezza viene determinata adottando un modello elastico-lineare dell'edificio. Nelle analisi dinamiche, poi, si introduce la non-linearità dei materiali in maniera concentrata: mediante cerniere plastiche flessionali alle estremità di travi e pilastri, e mediante cerniere plastiche assiali nelle bielle equivalenti. Si mostra che, grazie alla presenza dei setti murari, aumentano notevolmente la rigidezza e la resistenza della struttura nella direzione orizzontale perpendicolare ai piani di orditura dei telai: questa direzione diviene più forte rispetto a quella che, considerando la sola disposizione dei telai e la quasi totale assenza di collegamenti fra gli stessi, dovrebbe invece presentarsi meno vulnerabile sotto le azioni orizzontali. Viene inoltre mostrato che, nel loro piano, i telai dell'edificio esaminato offrono buone prestazioni in termini di resistenza all’azione sismica.

Analisi di pushover 3D per strutture in c.a.

In the present study, a new pushover procedure for 3D frame structures is proposed, based on the application of a set of horizontal force and torque distributions at each floor level; in order to predict the most severe configurations of an irregular structure subjected to an earthquake, more than one pushover analysis has to be performed. The proposed method is validated by a consistent comparison of results from static pushover and dynamic simulations in terms of different response parameters, such as displacements, rotations, floor shears and floor torques. Starting from the linear analysis, the procedure is subsequently extended to the nonlinear case. The results confirm the effectiveness of the proposed procedure to predict the structural behaviour in the most severe configurations.

Pushover analysis of an existing reinforced concrete bridge:Jamboree Road Overcrossing in Irvine, California

The work for the present thesis started in California, during my semester as an exchange student overseas. California is known worldwide for its seismicity and its effort in the earthquake engineering research field. For this reason, I immediately found interesting the Structural Dynamics Professor, Maria Q. Feng's proposal, to work on a pushover analysis of the existing Jamboree Road Overcrossing bridge. Concrete is a popular building material in California, and for the most part, it serves its functions well. However, concrete is inherently brittle and performs poorly during earthquakes if not reinforced properly. The San Fernando Earthquake of 1971 dramatically demonstrated this characteristic. Shortly thereafter, code writers revised the design provisions for new concrete buildings so to provide adequate ductility to resist strong ground shaking. There remain, nonetheless, millions of square feet of non-ductile concrete buildings in California. The purpose of this work is to perform a Pushover Analysis and compare the results with those of a Nonlinear Time-History Analysis of an existing bridge, located in Southern California. The analyses have been executed through the software OpenSees, the Open System for Earthquake Engineering Simulation. The bridge Jamboree Road Overcrossing is classified as a Standard Ordinary Bridge. In fact, the JRO is a typical three-span continuous cast-in-place prestressed post-tension box-girder. The total length of the bridge is 366 ft., and the height of the two bents are respectively 26,41 ft. and 28,41 ft.. Both the Pushover Analysis and the Nonlinear Time-History Analysis require the use of a model that takes into account for the nonlinearities of the system. In fact, in order to execute nonlinear analyses of highway bridges it is essential to incorporate an accurate model of the material behavior. It has been observed that, after the occurrence of destructive earthquakes, one of the most damaged elements on highway bridges is a column. To evaluate the performance of bridge columns during seismic events an adequate model of the column must be incorporated. Part of the work of the present thesis is, in fact, dedicated to the modeling of bents. Different types of nonlinear element have been studied and modeled, with emphasis on the plasticity zone length determination and location. Furthermore, different models for concrete and steel materials have been considered, and the selection of the parameters that define the constitutive laws of the different materials have been accurate. The work is structured into four chapters, to follow a brief overview of the content. The first chapter introduces the concepts related to capacity design, as the actual philosophy of seismic design. Furthermore, nonlinear analyses both static, pushover, and dynamic, time-history, are presented. The final paragraph concludes with a short description on how to determine the seismic demand at a specific site, according to the latest design criteria in California. The second chapter deals with the formulation of force-based finite elements and the issues regarding the objectivity of the response in nonlinear field. Both concentrated and distributed plasticity elements are discussed into detail. The third chapter presents the existing structure, the software used OpenSees, and the modeling assumptions and issues. The creation of the nonlinear model represents a central part in this work. Nonlinear material constitutive laws, for concrete and reinforcing steel, are discussed into detail; as well as the different scenarios employed in the columns modeling. Finally, the results of the pushover analysis are presented in chapter four. Capacity curves are examined for the different model scenarios used, and failure modes of concrete and steel are discussed. Capacity curve is converted into capacity spectrum and intersected with the design spectrum. In the last paragraph, the results of nonlinear time-history analyses are compared to those of pushover analysis.

Primi sviluppi per la concezione di tamponamenti in laterizio antisismici

L’obiettivo di questo studio è di fornire indicazioni ai partner del progetto ITALICI, il cui scopo comune è quello di realizzare tamponamenti con certificazione “strutturale”. Questi ultimi, fornendo sufficiente resistenza e dissipazione attraverso il corretto impasto di malta e dei blocchi unitamente alla giusta forma, permetterebbero una progettazione delle strutture più efficace e meno dispendiosa.