The use of remote sensing imagery for monitoring recovery in the aftermath of a natural disaster: the Hurricane Katrina Case

Although Recovery is often defined as the less studied and documented phase of the Emergency Management Cycle, a wide literature is available for describing characteristics and sub-phases of this process. Previous works do not allow to gain an overall perspective because of a lack of systematic consistent monitoring of recovery utilizing advanced technologies such as remote sensing and GIS technologies. Taking into consideration the key role of Remote Sensing in Response and Damage Assessment, this thesis is aimed to verify the appropriateness of such advanced monitoring techniques to detect recovery advancements over time, with close attention to the main characteristics of the study event: Hurricane Katrina storm surge. Based on multi-source, multi-sensor and multi-temporal data, the post-Katrina recovery was analysed using both a qualitative and a quantitative approach. The first phase was dedicated to the investigation of the relation between urban types, damage and recovery state, referring to geographical and technological parameters. Damage and recovery scales were proposed to review critical observations on remarkable surge- induced effects on various typologies of structures, analyzed at a per-building level. This wide-ranging investigation allowed a new understanding of the distinctive features of the recovery process. A quantitative analysis was employed to develop methodological procedures suited to recognize and monitor distribution, timing and characteristics of recovery activities in the study area. Promising results, gained by applying supervised classification algorithms to detect localization and distribution of blue tarp, have proved that this methodology may help the analyst in the detection and monitoring of recovery activities in areas that have been affected by medium damage. The study found that Mahalanobis Distance was the classifier which provided the most accurate results, in localising blue roofs with 93.7% of blue roof classified correctly and a producer accuracy of 70%. It was seen to be the classifier least sensitive to spectral signature alteration. The application of the dissimilarity textural classification to satellite imagery has demonstrated the suitability of this technique for the detection of debris distribution and for the monitoring of demolition and reconstruction activities in the study area. Linking these geographically extensive techniques with expert per-building interpretation of advanced-technology ground surveys provides a multi-faceted view of the physical recovery process. Remote sensing and GIS technologies combined to advanced ground survey approach provides extremely valuable capability in Recovery activities monitoring and may constitute a technical basis to lead aid organization and local government in the Recovery management.

A new insight in stress recovery tecniques and hessian reconstruction methods

Stress recovery techniques have been an active research topic in the last few years since, in 1987, Zienkiewicz and Zhu proposed a procedure called Superconvergent Patch Recovery (SPR). This procedure is a last-squares fit of stresses at super-convergent points over patches of elements and it leads to enhanced stress fields that can be used for evaluating finite element discretization errors. In subsequent years, numerous improved forms of this procedure have been proposed attempting to add equilibrium constraints to improve its performances. Later, another superconvergent technique, called Recovery by Equilibrium in Patches (REP), has been proposed. In this case the idea is to impose equilibrium in a weak form over patches and solve the resultant equations by a last-square scheme. In recent years another procedure, based on minimization of complementary energy, called Recovery by Compatibility in Patches (RCP) has been proposed in. This procedure, in many ways, can be seen as the dual form of REP as it substantially imposes compatibility in a weak form among a set of self-equilibrated stress fields. In this thesis a new insight in RCP is presented and the procedure is improved aiming at obtaining convergent second order derivatives of the stress resultants. In order to achieve this result, two different strategies and their combination have been tested. The first one is to consider larger patches in the spirit of what proposed in [4] and the second one is to perform a second recovery on the recovered stresses. Some numerical tests in plane stress conditions are presented, showing the effectiveness of these procedures. Afterwards, a new recovery technique called Last Square Displacements (LSD) is introduced. This new procedure is based on last square interpolation of nodal displacements resulting from the finite element solution. In fact, it has been observed that the major part of the error affecting stress resultants is introduced when shape functions are derived in order to obtain strains components from displacements. This procedure shows to be ultraconvergent and is extremely cost effective, as it needs in input only nodal displacements directly coming from finite element solution, avoiding any other post-processing in order to obtain stress resultants using the traditional method. Numerical tests in plane stress conditions are than presented showing that the procedure is ultraconvergent and leads to convergent first and second order derivatives of stress resultants. In the end, transverse stress profiles reconstruction using First-order Shear Deformation Theory for laminated plates and three dimensional equilibrium equations is presented. It can be seen that accuracy of this reconstruction depends on accuracy of first and second derivatives of stress resultants, which is not guaranteed by most of available low order plate finite elements. RCP and LSD procedures are than used to compute convergent first and second order derivatives of stress resultants ensuring convergence of reconstructed transverse shear and normal stress profiles respectively. Numerical tests are presented and discussed showing the effectiveness of both procedures.

Progettazione e implementazione di una rete di sensori mobili Arduino per scenari di Disaster Recovery

Sommario Il progetto descritto in questo documento consiste nella realizzazione di una prima applicazione pratica di uno specifico studio di ricerca rivolto al ripristino di reti wireless in scenari post-calamità naturali. In principio è stata descritta un’ampia analisi delle problematiche di rete che si vengono a creare in seguito ad eventi catastrofici. Successivamente, analizzando le varie tecniche e tecnologie oggetto di studio di diversi gruppi di ricerca, si è scelto di collaborare con il progetto STEM-Mesh, essendo ancora in fase sperimentale, il quale affronta il problema di ristabilire la connettività di rete in questi particolari scenari, attraverso l’utilizzo di tecnologie Cognitive Radio (CR), mobilità controllata e principi di reti auto-organizzanti. Di questo primo approccio pratico sono state poi descritte le fasi di progettazione, implementazione e testing. Nella fase di progettazione sono state studiate le componenti hardware e software che rispettassero il più possibile i requisiti e le caratteristiche dei dispositivi “staminali” STEM-Node cuore del progetto STEM-Mesh, ovvero dei dispositivi wireless altamente auto-riconfiguranti ed auto-organizzanti che possono diventare dispositivi sostituivi ai nodi compromessi in una rete, riconfigurandosi appunto in base alle funzionalità interrotte. Nella fase di implementazione si è passati alla stesura del codice, in Python e Wiring, abilitante il dispositivo STEM-Node. Infine nella fase di testing si è verificato che i risultati fossero quelli desiderati e che il sistema realizzato funzionasse come previsto.

Microchannel heat exchangers: An attractive option for the regenerator of a mobile orc waste heat recovery system

The performance of microchannel heat exchangers was assessed in gas-to-liquid applications in the order of several tens of kWth . The technology is suitable for exhaust heat recovery systems based on organic Rankine cycle. In order to design a light and compact microchannel heat exchanger, an optimization process is developed. The model employed in the procedure is validated through computational fluid-dynamics analysis with commercial software. It is shown that conjugate effects have a significant impact on the heat transfer performance of the device.

Studio, Realizzazione e Simulazione di SaveMe, un'applicazione Android per il Disaster Recovery

Quando avvengono disastri naturali, spesso la copertura dati viene a mancare e le infrastutture o sono danneggiate o sono sovraccariche; in questo modo è difficile comunicare sia da parte delle persone che hanno bisogno di aiuto, sia da parte dei soccorritori che cercano di organizzare i soccorsi. Con questa tesi si è voluto realizzare un'applicazione Android che permetta agli utenti di segnalare il proprio bisogno di aiuto, anche se il device non ha una connessione internet attiva. L'applicazione, sfruttando il Wi-Fi e il Wi-Fi Direct, cercherà di formare una rete di dispositivi, attraverso la quale i messaggi di aiuto degli utenti verranno scambiati tra i device. Questa rete, man mano, si allargherà fino ad arrivare ad includere device che avranno una connessione dati attiva. Questi comunicheranno con il mio server, al quale manderanno tutti i messaggi che gli sono arrivati. I dati del server, ossia i messaggi che sono stati mandati dagli utenti, verranno mostrati sul sito ltw1528.web.cs.unibo.it. Attraverso questo sito, i soccorritori potranno vedere la posizione degli utenti in stato di bisogno, cosicché potranno mandarli un messaggio di soccorso, che si propagherà nella rete formatasi in precedenza, ed organizzare i soccorsi in maniera ottimale. Si è anche voluto fare uno studio simulativo per testare la scalabilità dell'applicazione e per raccogliere dati statistici, quali il delay medio tra l'arrivo del messaggio al device con connessione dati e il tempo in cui è stato creato, l'influenza sulla batteria del numero dei messaggi scambiati e il numero degli host, il delay tra il tempo di invio e il tempo di arrivo nello scambio di messaggi al variare del numero degli host.