A LES study of a modified Ahmed body geometry

A numerical study using Large Eddy Simulation Coherent Structure Model (LES-CSM), of the flow around a simplified Ahmed body, has been done in this work of thesis. The models used are two salient geometries from the experimental investigation performed in [1], and consist, in particular, in two notch-back body geometries. Six simulation are carried out in total, changing Reynolds number and back-light angle of the model’s rear part. The Reynolds numbers used, based on the height of the models and the free stream velocity, are Re = 10000, Re = 30000 and Re = 50000. The back-light angles of the slanted surface with respect to the horizontal roof surface, that characterizes the vehicle, are taken as B = 31.8◦ and B = 42◦ respectively. The experimental results in [1] have shown that, depending on the parameter B, asymmetric and symmetric averaged flow over the back-light and in the wake for a symmetric geometry can be observed. The aims of the present work of master thesis are principally two. The first aim is to investigate and confirm the influence of the parameter B on the presence of the asymmetry of the averaged flow, and confirm the features described in the experimental results. The second important aspect is to investigate and observe the influence of the second variable, the Reynolds number, in the developing of the asymmetric flow itself. The results have shown the presence of the mentioned asymmetry as well as an influence of the Reynolds number on it.

The molecular gas content of star-forming galaxies in the ALPINE fields.

In this thesis, I aim to study the evolution with redshift of the gas mass fraction of a sample of 53 sources (from z ∼ 0.5 to z > 5) serendipitously detected in ALMA band 7 as part of the ALMA Large Program to INvestigate C II at Early Times (ALPINE). First, I used SED-fitting software CIGALE, which is able to implement energy balancing between the optical and the far infrared part, to produce a best-fit template of my sources and to have an estimate of some physical properties, such as the star formation rate (SFR), the total infrared luminosity and the total stellar mass. Then, using the tight correlation found by Scoville et al. (2014) between the ISM molecular gas mass and the rest-frame 850 μm luminosity, I used the latter, extrapolating it from the best-fit template using a code that I wrote in Python, as a tracer for the molecular gas. For my sample, I then derived the most important physical properties, such as molecular gas mass, gas mass fractions, specific star formation rate and depletion timescales, which allowed me to better categorize them and find them a place within the evolutionary history of the Universe. I also fitted our sources, via another code I wrote again in Python, with a general modified blackbody (MBB) model taken from the literature (Gilli et al. (2014), D’Amato et al. (2020)) to have a direct method of comparison with similar galaxies. What is evident at the end of the paper is that the methods used to derive the physical quantities of the sources are consistent with each other, and these in turn are in good agreement with what is found in the literature.

CFD Applications for Wave Energy Conversion Devices (MoonWEC) and Turbulent Fountains for Environmental Fluid Mechanics

This thesis is based on two studies that are related to floating wave energy conversion (WEC) devices and turbulent fountains. The ability of the open-source CFD software OpenFOAM® has been studied to simulate these phenomena. The CFD model has been compared with the physical experimental results. The first study presents a model of a WEC device, called MoonWEC, which is patented by the University of Bologna. The CFD model of the MoonWEC under the action of waves has been simulated using OpenFOAM and the results are promising. The reliability of the CFD model is confirmed by the laboratory experiments, conducted at the University of Bologna, for which a small-scale prototype of the MoonWEC was made from wood and brass. The second part of the thesis is related to the turbulent fountains which are formed when a heavier source fluid is injected upward into a lighter ambient fluid, or else a lighter source fluid is injected downward into a heavier ambient fluid. For this study, the first case is considered for laboratory experiments and the corresponding CFD model. The vertical releases of the source fluids into a quiescent, uniform ambient fluid, from a circular source, were studied with different densities in the laboratory experiments, conducted at the University of Parma. The CFD model has been set up for these experiments. Favourable results have been observed from the OpenFOAM simulations for the turbulent fountains as well, indicating that it can be a reliable tool for the simulation of such phenomena.

Modelling the Halo mass number counts in modified gravity cosmological scenarios

In this Thesis work we investigate some of different cosmological background scenarios using one of the main probes used in cosmology: the halo mass function. The observed abundance of galaxy clusters (or similarly DM haloes) can indeed be compared to its theoretical predictions to derive fundamental constrains on the cosmological scenario assumed. Given the importance of exploring and constraining models degenerate with the ΛCDM one, we test the applicability of some notable halo mass function models to these scenarios. To this purpose, we made use of the DUSTGRAIN-pathfinder N-body simulations, which assume cosmological scenarios that include modified gravity in the form of f(R) models and massive neutrinos. We carried on the analysis of 3 simulation snapshots at different redshifts, z = 0, 0.5, 1, building multiple samples of dark matter haloes by applying different overdensity thresholds during the procedure of halo identification. We started our analysis by considering the halo mass function model introduced by Despali et al. (2016), who proposed a parametrization that encapsulates the effect of the different halo mass definitions and the relative evolution with the redshift. We calibrated the main parameters of this relation by using the ΛCDM halo catalogues extracted from the DUSTGRAIN-pathfinder simulations, fitting the measured halo abundances at all redshifts and density thresholds. Afterwards we tested the same model parametrization with halo catalogues extracted from the simulations implementing both modified gravity and massive neutrinos. We repeated therefore the calibration procedure on these data to search for discrepancies with respect to the ΛCDM model. Finally we focused the analysis on the cosmological models implementing modified gravity only. We took our ΛCDM calibrated halo mass function and we modified it with the additional f (R) gravity form proposed by Gupta et al. (2022).