Inverters multilivello per il pilotaggio di motori asincroni trifase

In questo lavoro di laurea si presentano le varie famiglie di convertitori multilivello MMC (Modular Multilevel Converter). Questi convertitori sono di ausilio per il condizionamento dei parametri di reti elettriche in media e alta tensione e possono anche essere convenientemente utilizzati nel pilotaggio di motori asincroni trifase. Dopo aver esplicitato i principi di funzionamento, presentato i dispositivi di commutazione, le tipologie conosciute e le rispettive principali tecniche di modulazione, si è presentato il motore asincrono trifase, il suo circuito equivalente e le problematiche di accoppiamento ad un inverter. Successivamente si è simulato un inverter multilivello di tipo Diode-Clamped, con modulazione analogica PWM multiportante, che aziona un motore asincrono commerciale, così da poterne verificare le prestazioni in diversi regimi di velocità.

Lifetime Modeling of SiC Power Modules in Automotive Traction Inverters

This thesis presents a model-based software implementation for the estimation of the damage of a power module inside and automotive traction inverter with few hardware test setup performed to support the simulation with real-life data.

A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

Studio sul convertitore elettronico per il pilotaggio di motori asincroni trifase

La semplicità, affidabilità, robustezza ed economicità del motore asincrono trifase ne fanno un motore largamente utilizzato sia in ambiente industriale che civile (pompe, ascensori, montacarichi, nastri trasportatori, ventilatori, locomotive ferroviarie, …). È ipotizzabile che in futuro vi sarà sempre più largo impiego di motori elettrici e i recenti sviluppi nella tecnologia dei convertitori elettronici per il controllo dei motori asincroni ne consentiranno l’uso in sempre più estesi ambiti applicativi. La messa sotto tensione di motori a media/alta potenza presenta però, in fase di avviamento, correnti di spunto e coppie elevate che devono essere controllate. In questa tesi saranno pertanto studiate le tecniche di protezione, avviamento e controllo dei motori asincroni trifase Nel primo capitolo esamineremo le funzioni di sezionamento, comando e protezione da cortocircuiti e sovraccarichi e i dispositivi adatti a svolgere tale compito in modo coordinato. Nel secondo capitolo esamineremo le principali tecnologie usate per l’avviamento dei motori, da quelle più semplici a quelle che impiegano dispositivi elettronici allo stato solido: Soft-Starters a tiristori (solo regolazione AC), Inverters a transistori (controllo sia in frequenza che ampiezza della forma d’onda AC generata). Fra tutti i possibili convertitori DC/AC analizzeremo dettagliatamente esclusivamente quelli a controllo PWM analogico che costituiranno l’oggetto della trattazione dei capitoli seguenti.

Design and Implementation of Single phase 230V to Three Phase Inverter Based on the Embedded System STM-32 Applied to motor control

In the field of Power Electronics, several types of motor control systems have been developed using STM microcontroller and power boards. In both industrial power applications and domestic appliances, power electronic inverters are widely used. Inverters are used to control the torque, speed, and position of the rotor in AC motor drives. An inverter delivers constant-voltage and constant-frequency power in uninterruptible power sources. Because inverter power supplies have a high-power consumption and low transfer efficiency rate, a three-phase sine wave AC power supply was created using the embedded system STM32, which has low power consumption and efficient speed. It has the capacity of output frequency of 50 Hz and the RMS of line voltage. STM32 embedded based Inverter is a power supply that integrates, reduced, and optimized the power electronics application that require hardware system, software, and application solution, including power architecture, techniques, and tools, approaches capable of performance on devices and equipment. Power inverters are currently used and implemented in green energy power system with low energy system such as sensors or microcontroller to perform the operating function of motors and pumps. STM based power inverter is efficient, less cost and reliable. My thesis work was based on STM motor drives and control system which can be implemented in a gas analyser for operating the pumps and motors. It has been widely applied in various engineering sectors due to its ability to respond to adverse structural changes and improved structural reliability. The present research was designed to use STM Inverter board on low power MCU such as NUCLEO with some practical examples such as Blinking LED, and PWM. Then we have implemented a three phase Inverter model with Steval-IPM08B board, which converter single phase 230V AC input to three phase 380 V AC output, the output will be useful for operating the induction motor.