Finite Element Modeling of Spiral Frequency Steerable Acoustic Transducers (FSATs) for guided waves based Structural Health Monitoring of plate-like structures

Structural Health Monitoring (SHM) is an emerging area of research associated to improvement of maintainability and the safety of aerospace, civil and mechanical infrastructures by means of monitoring and damage detection. Guided wave structural testing method is an approach for health monitoring of plate-like structures using smart material piezoelectric transducers. Among many kinds of transducers, the ones that have beam steering feature can perform more accurate surface interrogation. A frequency steerable acoustic transducer (FSATs) is capable of beam steering by varying the input frequency and consequently can detect and localize damage in structures. Guided wave inspection is typically performed through phased arrays which feature a large number of piezoelectric transducers, complexity and limitations. To overcome the weight penalty, the complex circuity and maintenance concern associated with wiring a large number of transducers, new FSATs are proposed that present inherent directional capabilities when generating and sensing elastic waves. The first generation of Spiral FSAT has two main limitations. First, waves are excited or sensed in one direction and in the opposite one (180 ̊ ambiguity) and second, just a relatively rude approximation of the desired directivity has been attained. Second generation of Spiral FSAT is proposed to overcome the first generation limitations. The importance of simulation tools becomes higher when a new idea is proposed and starts to be developed. The shaped transducer concept, especially the second generation of spiral FSAT is a novel idea in guided waves based of Structural Health Monitoring systems, hence finding a simulation tool is a necessity to develop various design aspects of this innovative transducer. In this work, the numerical simulation of the 1st and 2nd generations of Spiral FSAT has been conducted to prove the directional capability of excited guided waves through a plate-like structure.

Sviluppo di una strategia per l’individuazione di squilibri di titolo tra cilindri di un motore a combustione interna

L’oggetto di questa tesi è l’individuazione di un metodo in grado di rilevare uno squilibrio cilindrico rilevante in un motore a combustione interna ad accensione comandata, sovralimentato dinamicamente. Il progetto si basa sull’osservazione sperimentale di un forte incremento dei valori assunti da indici basati sulla differenza dei tempi dente della ruota fonica, al manifestarsi di un brusco squilibrio di titolo in uno dei quattro cilindri. Ciò ha permesso di rilevare eventuali sbilanciamenti di titolo mediante una diagnosi intrusiva in grado di esaltarli. Questa metodologia a differenza di quelle basate sul segnale proveniente dalla sonda lambda, non risente del problema del mixing dei pacchetti di gas combusti all’interno della turbina. Il lavoro di tesi è consistito nel concepire un indice di rilevamento capace di esaltare il fenomeno sopra descritto, nel creare in ambiente Matlab-Simulink un modello che simuli la strategia in questione e renda possibile la realizzazione di un prototipo, per mezzo del quale è stata validata la strategia a bordo del veicolo. This thesis proposes a methodology to detect a relevant cylinder imbalance by means of flywheel speed fluctuation analysis in a turbocharged internal combustion engine. The main idea behind this project is the evidence that every time a significant cylinder imbalance is present, it is noticed an important increase of index based on tooth time sampled via flywheel. For this reason, it is possible to develop an intrusive strategy, which higliaghts a possible cylinder imbalance presence, in order to detect it. This method, unlike others based on the signal coming from Lambda sensor, doesn’t suffer from the presence of exhaust gases mixing effect inside the turbine. The objective of this thesis is to conceive a detection index able to put in evidence the phenomena described above, and to design a model inside the Matlab-Simulink environment, able to simulate the strategy and to make possible tests on the vehicle by means of a prototype.

Dielectrophoresis (dep) and electrowetting (ewod) as an anti-fouling process for antibacterial surfaces

Nowadays the medical field is struggling to decrease bacteria biofilm formation which leads to infection. Biomedical devices sterilization has not changed over a long period of time. This results in high costs for hospitals healthcare managements. The objective of this project is to investigate electric field effects and surface energy manipulation as solutions for preventing bacteria biofilm for future devices. Based on electrokinectic environments 2 different methods were tested: feasibility of electric gradient through mediums (DEP) reinforced by numerical simulations; and EWOD by the fabrication of golden interdigitated electrodes on silicon glass substrates, standard ~480 nm Teflon (PTFE) layer and polymeric gasket to contain the bacteria medium. In the first experiment quantitative analysis was carried out to achieve forces required to reject bacteria without considering dielectric environment limitations as bacteria and medium frequency dependence. In the second experiment applied voltages was characterized by droplets contact angle measurements and put to the live bacteria tests. The project resulted on promising results for DEP application due to its wide range of frequency that can be used to make a “general” bacteria rejecting; but in terms of practicality, EWOD probably have higher potential for success but more experiments are needed to verify if can prevent biofilm adhesion besides the Teflon non-adhesive properties (including limitations as Teflon breakthrough, layer sensitivity) at incubation times larger than 24 hours.

Algoritmi di Compressione secondo Lempel Ziv

Molti metodi di compressione lossless si basano sulle idee che nel 1977 i ricercatori israeliani Abraham Lempel e Jacob Ziv hanno presentato nell’articolo “A universal Algorithm for sequential Data Compression”. In questa tesi viene descritto il metodo di fattorizzazione LZ77, illustrato appunto da Lempel e Ziv, e vengono esposte le strutture dati fondamentali per la sua realizzazione. Sono inoltre descritti due algoritmi CPS1 e CPS2 che realizzano LZ77. Infine, sfruttando i dati raccolti sperimentalmente da Al-Haffedh et al. in “A Comparison of Index-Based Lempel-Ziv LZ77 Factorization Algorithms” [2012], gli algoritmi descritti vengono confrontati in termini di spazio e tempo.