Design and implementation of BIRDY satellite data and Radiation Payload simulators

Numerical modelling and simulations are needed to develop and test specific analysis methods by providing test data before BIRDY would be launched. This document describes the "satellite data simulator" which is a multi-sensor, multi-spectral satellite simulator produced especially for the BIRDY mission which could be used as well to analyse data from other satellite missions providing energetic particles data in the Solar system.

Design and implementation of a testbed for data distribution management

Data Distribution Management (DDM) is a core part of High Level Architecture standard, as its goal is to optimize the resources used by simulation environments to exchange data. It has to filter and match the set of information generated during a simulation, so that each federate, that is a simulation entity, only receives the information it needs. It is important that this is done quickly and to the best in order to get better performances and avoiding the transmission of irrelevant data, otherwise network resources may saturate quickly. The main topic of this thesis is the implementation of a super partes DDM testbed. It evaluates the goodness of DDM approaches, of all kinds. In fact it supports both region and grid based approaches, and it may support other different methods still unknown too. It uses three factors to rank them: execution time, memory and distance from the optimal solution. A prearranged set of instances is already available, but we also allow the creation of instances with user-provided parameters. This is how this thesis is structured. We start introducing what DDM and HLA are and what do they do in details. Then in the first chapter we describe the state of the art, providing an overview of the most well known resolution approaches and the pseudocode of the most interesting ones. The third chapter describes how the testbed we implemented is structured. In the fourth chapter we expose and compare the results we got from the execution of four approaches we have implemented. The result of the work described in this thesis can be downloaded on sourceforge using the following link: https://sourceforge.net/projects/ddmtestbed/. It is licensed under the GNU General Public License version 3.0 (GPLv3).

The atmospheric stable boundary layer: Data analysis and comparison with similarity theories

The objective of this dissertation is to study the structure and behavior of the Atmospheric Boundary Layer (ABL) in stable conditions. This type of boundary layer is not completely well understood yet, although it is very important for many practical uses, from forecast modeling to atmospheric dispersion of pollutants. We analyzed data from the SABLES98 experiment (Stable Atmospheric Boundary Layer Experiment in Spain, 1998), and compared the behaviour of this data using Monin-Obukhov's similarity functions for wind speed and potential temperature. Analyzing the vertical profiles of various variables, in particular the thermal and momentum fluxes, we identified two main contrasting structures describing two different states of the SBL, a traditional and an upside-down boundary layer. We were able to determine the main features of these two states of the boundary layer in terms of vertical profiles of potential temperature and wind speed, turbulent kinetic energy and fluxes, studying the time series and vertical structure of the atmosphere for two separate nights in the dataset, taken as case studies. We also developed an original classification of the SBL, in order to separate the influence of mesoscale phenomena from turbulent behavior, using as parameters the wind speed and the gradient Richardson number. We then compared these two formulations, using the SABLES98 dataset, verifying their validity for different variables (wind speed and potential temperature, and their difference, at different heights) and with different stability parameters (zita or Rg). Despite these two classifications having completely different physical origins, we were able to find some common behavior, in particular under weak stability conditions.

Development and implementation of a S/W platform to automatically receive and share satellite data

Relazione del lavoro di creazione e implementazione della piattaforma software che sviluppa l’archivio del progetto SATNET. I satelliti universitari hanno un tempo di vista della propria Stazione di Terra di pochi minuti al giorno: SATNET risponde all’esigenza di comunicare con un satellite universitario in orbita bassa per più dei pochi minuti al giorno che una singola Stazione di Terra permette. Questo avviene grazie a una rete di Stazioni di Terra Satellitari collegate da specifiche missioni comuni che mettono in condivisione dati ricevuti da uno o più satelliti, aumentando il rendimento dati/giorno di questi e permettendo una migliore fruizione delle Stazioni di Terra stesse. Il network sfrutta Internet come canale di connessione, e prevede la presenza di un archivio nel quale memorizzare i dati ricevuti, per poi renderne possibile la consultazione e il recupero. Oggetto di questo lavoro di tesi è stato lo sviluppo e l’implementazione di tale archivio: utilizzando un sito web dinamico, il software risponde a tutte le richieste evidenziate nel paragrafo precedente, permettendo a utenti autenticati di inserire dati e ad altri di poterne avere accesso. Il software è completo e funzionante ma non finito, in quanto manca la formulazione di alcune richieste; per esempio non è stato specificato il tipo di informazioni che è possibile caricare in upload, né il tipo di campi richiesti nel modulo di registrazione dei vari utenti. In questi casi sono stati inseriti campi generici, lasciando all’utente la possibilità di modificarli in seguito. Il software è stato dunque concepito come facilmente personalizzabile e modificabile anche da utenti inesperti grazie alla sola lettura della tesi, che rappresenta quindi una vera e propria guida per l’utilizzo, l’installazione, la personalizzazione e la manutenzione della piattaforma software. La tesi evidenzia gli obiettivi e le richieste, mostrando l’aspetto del sito web e le sue funzionalità, e spiega passo per passo il procedimento per la modifica dell’aspetto delle pagine e di alcuni parametri di configurazione. Inoltre, qualora siano necessarie modifiche sostanziali al progetto, introduce i vari linguaggi di programmazione necessari allo sviluppo e alla programmazione web e aiuta l’utente nella comprensione della struttura del software. Si conclude con alcuni suggerimenti su eventuali modifiche, attuabili solo a seguito di un lavoro di definizione degli obiettivi e delle specifiche richieste. In futuro ci si aspetta l’implementazione e la personalizzazione del software, nonché l’integrazione dell’archivio all’interno del progetto SATNET, con l’obiettivo di migliorare e favorire la diffusione e la condivisione di progetti comuni tra diverse Università Europee ed Extra-Europee.

Data analysis and simulations of VIRTIS venus spectra

VIRTIS, a bordo di Venus Express, è uno spettrometro in grado di operare da 0.25 a 5 µm. Nel periodo 2006-2011 ha ricavato un'enorme mole di dati ma a tutt'oggi le osservazioni al lembo sono poco utilizzate per lo studio delle nubi e delle hazes, specialmente di notte. Gli spettri al lembo a quote mesosferiche sono dominati dalla radianza proveniente dalle nubi e scatterata in direzione dello strumento dalle hazes. L'interpretazione degli spettri al lembo non può quindi prescindere dalla caratterizzazione dell'intera colonna atmosferica. L'obiettivo della tesi è di effettuare un’analisi statistica sulle osservazioni al nadir e proporre una metodologia per ricavare una caratterizzazione delle hazes combinando osservazioni al nadir e al lembo. La caratterizzazione delle nubi è avvenuta su un campione di oltre 3700 osservazioni al nadir. È stato creato un ampio dataset di spettri sintetici modificando, in un modello iniziale, vari parametri di nube quali composizione chimica, numero e dimensione delle particelle. Un processo di fit è stato applicato alle osservazioni per stabilire quale modello potesse descrivere gli spettri osservati. Si è poi effettuata una analisi statistica sui risultati del campione. Si è ricavata una concentrazione di acido solforico molto elevata nelle nubi basse, pari al 96% in massa, che si discosta dal valore generalmente utilizzato del 75%. Si sono poi integrati i risultati al nadir con uno studio mirato su poche osservazioni al lembo, selezionate in modo da intercettare nel punto di tangenza la colonna atmosferica osservata al nadir, per ricavare informazioni sulle hazes. I risultati di un modello Monte Carlo indicano che il numero e le dimensioni delle particelle previste dal modello base devono essere ridotte in maniera significativa. In particolare si osserva un abbassamento della quota massima delle hazes rispetto ad osservazioni diurne.

Design and implementation of a Reinforcement Learning framework for iOS devices

Reinforcement Learning is an increasingly popular area of Artificial Intelligence. The applications of this learning paradigm are many, but its application in mobile computing is in its infancy. This study aims to provide an overview of current Reinforcement Learning applications on mobile devices, as well as to introduce a new framework for iOS devices: Swift-RL Lib. This new Swift package allows developers to easily support and integrate two of the most common RL algorithms, Q-Learning and Deep Q-Network, in a fully customizable environment. All processes are performed on the device, without any need for remote computation. The framework was tested in different settings and evaluated through several use cases. Through an in-depth performance analysis, we show that the platform provides effective and efficient support for Reinforcement Learning for mobile applications.

PLUME preliminary study and first Van der Meer scan data analysis

Il rilevatore Probe for LUminosity MEasurement (PLUME) è un luminometro per l’esperimento LHCb al CERN. Fornirà misurazioni istantanee della luminosità per LHCb durante la Run 3 a LHC. L’obiettivo di questa tesi è di valutare, con dati simulati, le prestazioni attese di PLUME, come l’occupanza dei PMT che compongono il rivelatore, e riportare l’analisi dei primi dati ottenuti da PLUME durante uno scan di Van der Meer. In particolare, sono state ottenuti tre misure del valore della sezione d’urto, necessarie per tarare il rivelatore, ovvero σ1Da = (1.14 ± 0.11) mb, σ1Db = (1.13 ± 0.10) mb, σ2D = (1.20 ± 0.02) mb, dove i pedici 1D e 2D corrispondono a uno scan di Van der Meer unidimensionale e bidimensionale. Tutti i risultati sono in accordo tra loro.

Smart Data Analysis on Lamborghini Connected Vehicles

The thesis is the result of work conducted during a period of six months at the Strategy department of Automobili Lamborghini S.p.A. in Sant'Agata Bolognese (BO) and concerns the study and analysis of Big Data relating to Lamborghini's connected cars. The Big Data is a project of Connected Car Project House, that is an inter-departmental team which works toward the definition of the Lamborghini corporate connectivity strategy and its implementation in the product portfolio. The Data of the connected cars is one of the hottest topics right now in the automotive industry; in fact, all the largest automotive companies are investi,ng a lot in this direction, in order to derive the greatest advantages both from a purely economic point of view, because from these data you can understand a lot the behaviors and habits of each driver, and from a technological point of view because it will increasingly promote the development of 5G that will be an important enabler for the future of connectivity. The main purpose of the work by Lamborghini prospective is to analyze the data of the connected cars, in particular a data-set referred to connected Huracans that had been already placed on the market, and, starting from that point, derive valuable Key Performance Indicators (KPIs) on which the company could partly base the decisions to be made in the near future. The key result that we have obtained at the end of this period was the creation of a Dashboard, in which is possible to visualize many parameters and indicators both related to driving habits and the use of the vehicle itself, which has brought great insights on the huge potential and value that is present behind the study of these data. The final Demo of the project has received great interest, not only from the whole strategy department but also from all the other business areas of Lamborghini, making mostly a great awareness that this will be the road to follow in the coming years.

Augmented Reality for Airport Control Tower: Analysis and Implementation of Safety Nets

With the development of new technologies, Air Traffic Control, in the nearby of the airport, switched from a purely visual control to the use of radar, sensors and so on. As the industry is switching to the so-called Industry 4.0, also in this frame, it would be possible to implement some of the new tools that can facilitate the work of Air Traffic Controllers. The European Union proposed an innovative project to help the digitalization of the European Sky by means of the Single European Sky ATM Research (SESAR) program, which is the foundation on which the Single European Sky (SES) is based, in order to improve the already existing technologies to transform Air Traffic Management in Europe. Within this frame, the Resilient Synthetic Vision for Advanced Control Tower Air Navigation Service Provision (RETINA) project, which saw the light in 2016, studied the possibility to apply new tools within the conventional control tower to reduce the air traffic controller workload, thanks to the improvements in the augmented reality technologies. After the validation of RETINA, the Digital Technologies for Tower (DTT) project was established and the solution proposed by the University of Bologna aimed, among other things, to introduce Safety Nets in a Head-Up visualization. The aim of this thesis is to analyze the Safety Nets in use within the control tower and, by developing a working concept, implement them in a Head-Up view to be tested by Air Traffic Control Operators (ATCOs). The results, coming from the technical test, show that this concept is working and it could be leading to a future implementation in a real environment, as it improves the air traffic controller working conditions also when low visibility conditions apply.

Design and implementation of a vibrational condition monitoring system

Industrial companies, particularly those with induction motors and gearboxes as integral components of their systems, are utilizing Condition Monitoring (CM) systems more frequently in order to discover the need for maintenance in advance, as traditional maintenance only performs tasks when a failure has been identified. Utilizing a CM system is essential to boost productivity and minimize long-term failures that result in financial loss. The more exact and practical the CM system, the better the data analysis, which adds to a more precise maintenance forecast. This thesis project is a cooperation with PEI Vibration Monitoring s.r.l. to design and construct a low-cost vibrational condition monitoring system to check the health of induction motors and gearboxes automatically. Moreover, according to the company's request, such a system should have specs comparable to NI 9234, one of the company's standard Data Acquisition (DAQ) boards, but at a significantly cheaper price. Additionally, PEI VM Company has supplied all hardware and electronic components. The suggested CM system is capable of highprecision autonomous monitoring of induction motors and gearboxes, and it consists of a Raspberry Pi 3B and MCC 172 DAQ board.

Data analysis and hydrological modelling of rainfall and discharge extremes along the Tione River: implications for the design of water structures

There are many natural events that can negatively affect the urban ecosystem, but weather-climate variations are certainly among the most significant. The history of settlements has been characterized by extreme events like earthquakes and floods, which repeat themselves at different times, causing extensive damage to the built heritage on a structural and urban scale. Changes in climate also alter various climatic subsystems, changing rainfall regimes and hydrological cycles, increasing the frequency and intensity of extreme precipitation events (heavy rainfall).  From an hydrological risk perspective, it is crucial to understand future events that could occur and their magnitude in order to design safer infrastructures. Unfortunately, it is not easy to understand future scenarios as the complexity of climate is enormous.  For this thesis, precipitation and discharge extremes were primarily used as data sources. It is important to underline that the two data sets are not separated: changes in rainfall regime, due to climate change, could significantly affect overflows into receiving water bodies. It is imperative that we understand and model climate change effects on water structures to support the development of adaptation strategies.   The main purpose of this thesis is to search for suitable water structures for a road located along the Tione River. Therefore, through the analysis of the area from a hydrological point of view, we aim to guarantee the safety of the infrastructure over time.   The observations made have the purpose to underline how models such as a stochastic one can improve the quality of an analysis for design purposes, and influence choices.

Twitter data analysis for financial markets

Over the time, Twitter has become a fundamental source of information for news. As a one step forward, researchers have tried to analyse if the tweets contain predictive power. In the past, in financial field, a lot of research has been done to propose a function which takes as input all the tweets for a particular stock or index s, analyse them and predict the stock or index price of s. In this work, we take an alternative approach: using the stock price and tweet information, we investigate following questions. 1. Is there any relation between the amount of tweets being generated and the stocks being exchanged? 2. Is there any relation between the sentiment of the tweets and stock prices? 3. What is the structure of the graph that describes the relationships between users?

Assimilation of data from conventional and non conventional networks through a LETKF scheme in the COSMO model

The present work studies a km-scale data assimilation scheme based on a LETKF developed for the COSMO model. The aim is to evaluate the impact of the assimilation of two different types of data: temperature, humidity, pressure and wind data from conventional networks (SYNOP, TEMP, AIREP reports) and 3d reflectivity from radar volume. A 3-hourly continuous assimilation cycle has been implemented over an Italian domain, based on a 20 member ensemble, with boundary conditions provided from ECMWF ENS. Three different experiments have been run for evaluating the performance of the assimilation on one week in October 2014 during which Genova flood and Parma flood took place: a control run of the data assimilation cycle with assimilation of data from conventional networks only, a second run in which the SPPT scheme is activated into the COSMO model, a third run in which also reflectivity volumes from meteorological radar are assimilated. Objective evaluation of the experiments has been carried out both on case studies and on the entire week: check of the analysis increments, computing the Desroziers statistics for SYNOP, TEMP, AIREP and RADAR, over the Italian domain, verification of the analyses against data not assimilated (temperature at the lowest model level objectively verified against SYNOP data), and objective verification of the deterministic forecasts initialised with the KENDA analyses for each of the three experiments.

Design and Implementation of a Cloud Infrastructure for Distributed Scientific Calculation

Cloud computing enables independent end users and applications to share data and pooled resources, possibly located in geographically distributed Data Centers, in a fully transparent way. This need is particularly felt by scientific applications to exploit distributed resources in efficient and scalable way for the processing of big amount of data. This paper proposes an open so- lution to deploy a Platform as a service (PaaS) over a set of multi- site data centers by applying open source virtualization tools to facilitate operation among virtual machines while optimizing the usage of distributed resources. An experimental testbed is set up in Openstack environment to obtain evaluations with different types of TCP sample connections to demonstrate the functionality of the proposed solution and to obtain throughput measurements in relation to relevant design parameters.