Catalizzatori polifunzionali per la sintesi di Metil Isobutil Chetone

In this work, we have examined the activity and selectivity of new catalysts for the single-stage production of methyl isobutyl ketone (MIBK, 4- methyl-2-pentanone) from acetone (both in liquid and gas phase), using a fixed bed reactor operated in the temperature range between 373 and 473 K. The main reaction pathways for the synthesis of MIBK from acetone are given in Fig.1. The first step is the self condensation of acetone to diacetone alcohol (DAA, 4-hydroxy-4-methyl-2-pentanone); the second step is the dehydration of DAA to mesityl oxide (MO, 4-methyl-3-penten-2-one); the final step is the selective hydrogenation of the carbon–carbon double bond of MO to form MIBK. The most commonly observed side reactions are over-condensations and unselective hydrogenations (also shown in Fig.1). Two types of catalysts were studied: i)Pd supported on MgO-SiO2 mixed oxides with ratio of Mg to Si, synthetized using Ohnishi’s method and ii)Pd supported on alumina doped with 5% or 10% of MgO. The different Mg-Si and Mg-Al catalysts were characterized by different techniques (XRD, BET, SEM, NH3-TPD and CO2-TPD) and tested under different conditions in the condensation of acetone to diacetone alcohol and its dehydration to mesityl oxide to enhance the activity. Palladium was chosen as metal component, and its hydrogenation activity was studied. A low hydrogenation activity negatively affects the acetone conversion and promotes the production of mesityl oxide. Hydrogenation conditions being too severe may favor the unwanted hydrogenation of acetone to 2-propanol and of MIBK to methyl isobutyl carbinol (MIBC, 4-methyl-2-pentanol) but this effect is less detrimental to the MIBK selectivity than an unsufficient hydrogenation activity.

Sintesi e caratterizzazione strutturale di derivati piperidinici e morfolinici chirali

The topic of this thesis concerns the study of catalytic processes for the synthesis of chiral 3,4,5-trisubstituted piperidine and 2,6-disubstituted morpholine. Substrates possessing an α,β-unsaturated ester and a ketone moiety, able to undergo addition/cyclization cascade reactions with different pro-nucleophiles (thiophenols, acetone cyanohydrin and malononitrile), have been evaluated. Chiral and achiral systems for phase-transfer catalysis have been applied as catalysts. Moderate enantiomeric excesses have been obtained for the morpholinic products and good to excellent values for the piperidinic products, by using cyclopeptoids and quaternary ammonium salts derived from Chincona alkaloids as catalysts respectively. Moreover, the absolute configuration of the 3,4,5-trisubstituted piperidines has been determined through quantomechanical simulations of their chirooptical spectra. Finally, the relative configuration of the 2,6-disubstituted morpholines has been assigned through NMR experiments.

A DFT study on chemodivergent preparation of piperidinic and morpholinic heterocycles

The topic of this thesis is the DFT computational study of the mechanisms for the synthesis of chiral 3,4,5-trisubstituted piperidines and 2,6-disubstituted morpholines. The goal of this synthesis is to use, the same substrate containing two electrophilic sites: an α,β-unsaturated ester and a ketone, which evolve according to the nucleophile used (cyanide, phenyl sulfide) through different addition and cyclization reactions. A quaternary ammonium salt is used as a catalyst for these reactions, which leads to a diastereoisomeric excess both for the reactions of morpholine and piperidine products. Studies in silico of the pathways of these reactions explain the chemoselection and diasteroselection deriving from the two nucleophiles used. In this case of piperidine products, it was also possible to validate the hypothesis of a concerted nucleophilic addition mechanism on the α,β-unsaturated site and cyclization due to an intramolecular Michael addition.

Effetto della porosità sulle proprietà meccaniche e osteoinduttive di biomateriali utili per l’ingegneria del tessuto osseo

L'elaborato tratta dell'effetto della porosità sulle proprietà meccaniche e osteoinduttive di un biomateriale utilizzabile in ingegneria del tessuto osseo, per come questo è stato valutato nello studio "Surface porous poly-ether-ether-ketone based on three-dimensional printing for load-bearing orthopedic implant" condotto dai ricercatori Shuai Li, Tianyu Wang, Jiqiang Hu, Zhibin Li, Bing Wang, Lianchao Wang e Zhengong Zhou. In particolare, il biomateriale studiato è rappresentato dal “PEEK”, un polimero termoplastico che viene lavorato, tramite stampante 3D a filamento, in modo da presentare una struttura che include un corpo centrale solido ricoperto da strati porosi sia nello strato superiore sia in quello inferiore. Per la valutazione delle proprietà meccaniche sono state svolte una prova a trazione e una prova a flessione. I valori ottenuti sperimentalmente sono stati confrontati con quelli ottenuti da un’analisi numerica e da un modello teorico. Per la valutazione delle proprietà osteoinduttive sono stati condotti test di proliferazione cellulare e differenziamento osteogenico. I risultati ottenuti concludono che specifici valori della porosità superficiale del biomateriale presentano proprietà meccaniche e osteoinduttive che lo rendono idoneo all’utilizzo come impianto osteogenico in ingegneria tissutale.