Study of recycled Rap and Ra as alternative aggregates for pavements' sub-base and base

Nowadays, an important world’s population growth forecast establish that an increase of 2 billion people is expected by 2050. (UN,2019). This increment of people worldwide involves more humans, as well as growth of the demand for the construction of new residential, institutional, industrial, and infrastructural areas, prompting to a higher consumption of natural resources as required for construction materials. In addition, an effect of this population growth is the production and accumulation of waste causing a serious environmental and economic issue around the world. As an alternative to just producing more waste at the final stage of a building, house, road, among other concrete-based structures, adequate techniques must be applied for recycling and reusing these potential materials. The main priority of the thesis is to foment and evaluate the sustainable construction work leading to environmental-friendly actions that promote the reuse and recycling of construction waste, focusing on the use of construction recycled construction materials as an alternative for sub-base and base of road structure application. This thesis is committed to the analysis of the several laboratory tests carried out for achieving the physical-mechanical properties of the studied materials (recycled concrete aggregates + reclaimed asphalt pavement (RCA+RAP) and stabilized crushed sleepers). All these tests have been carried out in the Laboratory of Roads from the University of Bologna and in the experimental site in CAR srl., at Imola. The results are reported in tables, graphs, and are discussed. The mechanical properties values obtained from the laboratory tests are analysed and compared with standard values declared in the Italian and European normative for roads construction and to the results obtained from in-situ tests in the experimentation field (CAR srl in Imola) with the same materials. This to analyse the performance of them under natural conditions.

Optimisation of chemical lysis protocol for point-of-care leukocyte differentiation

The full blood cell (FBC) count is the most common indicator of diseases. At present hematology analyzers are used for the blood cell characterization, but, recently, there has been interest in using techniques that take advantage of microscale devices and intrinsic properties of cells for increased automation and decreased cost. Microfluidic technologies offer solutions to handling and processing small volumes of blood (2-50 uL taken by finger prick) for point-of-care(PoC) applications. Several PoC blood analyzers are in use and may have applications in the fields of telemedicine, out patient monitoring and medical care in resource limited settings. They have the advantage to be easy to move and much cheaper than traditional analyzers, which require bulky instruments and consume large amount of reagents. The development of miniaturized point-of-care diagnostic tests may be enabled by chip-based technologies for cell separation and sorting. Many current diagnostic tests depend on fractionated blood components: plasma, red blood cells (RBCs), white blood cells (WBCs), and platelets. Specifically, white blood cell differentiation and counting provide valuable information for diagnostic purposes. For example, a low number of WBCs, called leukopenia, may be an indicator of bone marrow deficiency or failure, collagen- vascular diseases, disease of the liver or spleen. The leukocytosis, a high number of WBCs, may be due to anemia, infectious diseases, leukemia or tissue damage. In the laboratory of hybrid biodevices, at the University of Southampton,it was developed a functioning micro impedance cytometer technology for WBC differentiation and counting. It is capable to classify cells and particles on the base of their dielectric properties, in addition to their size, without the need of labeling, in a flow format similar to that of a traditional flow cytometer. It was demonstrated that the micro impedance cytometer system can detect and differentiate monocytes, neutrophils and lymphocytes, which are the three major human leukocyte populations. The simplicity and portability of the microfluidic impedance chip offer a range of potential applications in cell analysis including point-of-care diagnostic systems. The microfluidic device has been integrated into a sample preparation cartridge that semi-automatically performs erythrocyte lysis before leukocyte analysis. Generally erythrocytes are manually lysed according to a specific chemical lysis protocol, but this process has been automated in the cartridge. In this research work the chemical lysis protocol, defined in the patent US 5155044 A, was optimized in order to improve white blood cell differentiation and count performed by the integrated cartridge.

User centered retrofit: The case of kadk campus, Copenhagen, (dk)

The following research thesis is about a retrofit project made in Denmark, Copenhagen, and carried out on one of the buildings belonging to the Royal Danish Academy. The key assumption and base of the entire research process is that, up to now, the standard procedure in retrofit cases like this provides as comparative method between de facto and design, the use of Energy Simulation software. These programs generally divide the space into different thermal zones, assigning to each of them different levels of employment, activities, set-point temperatures set for cooling and heating analysis and so on, but always providing average and constant values, usually taken in the middle point of the single thermal zone. Therefore, the project and its research path stems from the attempt to investigate the potentialities of this kind of designing for retrofit process, as previously anticipated not antithetical but complementary to that classic energy-based retrofit, thus passing from the building scale, and all its thermal zones, to the users' scale, related to humans and microclimates. The main software used in this process is Autodesk Simulation CFD. The idea behind the project is that in certain situations, for example, it will not be necessary to add throughout insulation layers (previously parameterized and optimized with Design Builder), and that even in Winter conditions, due maybe to the users' activities, the increased level of clothing (clo) and the heat produced by equipments, thermal comfort could be achieved also in areas characterized by considerably lower MRT. After the analysis of the State of Art and its simulations, the project has still been supported by the tool itself, the CFD Software, in an iterative process aimed at achieving visible improvements in terms of MRT, on spaces with different needs and characteristics, both in Winter and Summer regimes.

Temperature effects on larval growth and survival in five species of Caribbean Echinoids

Under the global change scenario, the possible effects of ocean warming were investigated on the larvae of five species of Caribbean Echinoids: Echinometra lucunter, Echinometra viridis, Clypeaster rosaceus, Tripneustes ventricosus and Lytechinus williamsi. Their thermal tolerance was evaluated rearing them for six days under different temperature regimes (26, 28, 30, 32, 34, 36°C). The larval sensitivity to the treatments was evaluated on the base of survival and growth. The rearing at higher temperatures has revealed a great suffering state of the larvae by inducing both reduction of live larvae and abnormality in their development. The extent of impact of the treatments varied from species to species, evidencing different levels of thermal tolerance. Anyway, higher temperature treatments have shown a general lethal threshold at about 34°C for most of the species. As an exception, the lethal threshold of Echinometra species was 36°C, few larvae of which being still capable of survive at the temperature of 34°C. The studies have also analyzed the effect of water warming on the larvae growth in terms of size and symmetry. The results put in evidence the presence of a critical upper temperature (about 32°C) at which the larvae of all species reveal a great suffering state that translates in the reduction of size (i.e., of body, stomach and postero-dorsal arm) and abnormalities (i.e., strong difference in the lengths of the two postero-dorsal arms). As sea surface temperatures are predicted to increase of 4-5°C by 2100, the high percentage of abnormal larvae and their scarce survival observed at 32- 34°C treatments indicate that the early stages of these species could be affected by future global warming.

Trajectory design of a multiple flyby mission to asteroids

In designing the trajectory for a multiple flyby mission to asteroids the choice of the targets is the most challenging problem. This dissertation faces this problem in the framework of the recently issued medium-size mission call (M5) from ESA: CASTAway. Starting from the preliminary work done in [6], this thesis develops a methodology for sequencing the potential targets in a multiple flyby mission. In order to reduce the computational time, the complete database of known small bodies is firstly pruned on the base of heuristic considerations. Using the assumption of small manoeuvres, a chief orbit concept could be used. Thus, two heuristic thresholds are defined in order to exclude non-promising targets given a chief orbit. The sequencing process takes chief orbit and promising targets as inputs and gives a set of candidate sequences. The results of such a process are analysed in the CASTAway framework and the best feasible sequence studied in details.

Investigating stellar mixing processes through the study of the Red-Giant Branch bump

Extra mixing at the borders of convective zones in stellar interiors takes on an important role in the chemical evolution of stars and galaxies through the transport of chemical elements towards the stellar surface: knowing the overshooting mechanism can therefore lead to a better understanding of the observed chemical abundances in stellar photospheres. The comprehension of this phenomenon is quite uncertain and currently object of many studies. In particular, concerning low mass stars, in the past decades several works highlighted a discrepancy between the observed luminosity of the Red-Giant Branch bump and its prediction from simulations, which can be fixed including overshooting at the base of the convective envelope. This work, studying the Red-Giant Branch bump and using it as a diagnostic for extra mixing processes, tries to classify two different types of overshooting, instantaneous and diffusive, using both simulations from stellar models and Globular Clusters’ data. The aim is to understand which one of the two mixing processes is the most suitable in reproducing the observed stellar behaviour and, in case both of them provide reliable results, what are the conditions under which they produce the same effects on the Red-Giant Branch bump luminosity function and are consequently indistinguishable. Finally, possible dependences of overshooting efficiency on stellar parameters, such as chemical composition, are analysed.