Assessment of the resilience of coral reefs to natural and human disturbances by means of recruitment panels in Indo-Pacific

Indo-Pacific region encompasses about 75% of world's coral reefs, but hard coral cover in this region experienced a 32% region-wide decline since 1970s. This great change is primarily ascribable to natural and anthropogenic pressures, including climate change and human activities effects. Coral reef conservation requires management strategies oriented to maintain their diversity and the capacity to provide ecosystem goods and services. Coral reef resilience, i.e. the capacity to recover after disturbances, is critical to their long-term persistence. The aims of the present study were to design and to test field experiments intended to measure changes in recruitment processes, as a fundamental aspect of the coral reef resilience. Recruitment experiments, using artificial panels suspended in the water column, were carried out in two Indo-Pacific locations affected by different disturbances: a new mine in Bangka Island (Indonesia), and the increased sedimentation due to coastal dynamics in Vavvaru Island (Maldives). One (or more) putatively disturbed site(s) was selected to be tested against 3 randomly selected control sites. Panels’ arrangement simulates 2 proximities to living corals, i.e. the sources of propagules: few centimetres and 2 meters over. Panels were deployed simultaneously at each site and left submerged for about five months. Recruits were identified to the lowest possible taxonomic level and recruited assemblages were analysed in terms of percent cover. In general it was not possible to detect significant differences between the benthic assemblages recruited in disturbed and control sites. The high variability observed in recruits assemblages structure among control sites may be so large to mask the possible disturbance effects. Only few taxa showed possible effects of the disturb they undergo. The field tests have highlighted strengths and weaknesses of the proposed approach and, based on these results, some possible improvements were suggested.

Assessment of marine litter in the Western Adriatic Sea and its impact on marine biota

Due to its environmental, safety, health and socio-economic impacts, marine litter has been recognized as a 21st century global challenge, so that it has been included in Descriptor 10 of the EU MSFD. For its morphological features and anthropogenic pressures, the Adriatic Sea is very sensitive to the accumulation of debris, but data are inconsistent and fragmented. This thesis, in the framework of DeFishGear project, intents to assess marine litter on beaches and on seafloor in the Western Adriatic sea, and test if debris ingestion by fish occurs. Three beaches were sampled during two surveys in 2015. Benthic litter monitoring was carried out in the FAO GSA17 during fall 2014, using a rapido trawl. Litter ingestion was investigated through gut contents analysis of 260 fish belonging to 8 commercial species collected in Western Gulf of Venice. Average litter density on beaches was 1.5 items/m2 during spring, and decreased to 0.8 items/m2 in summer. Litter composition was heterogeneous and varied among sites, even if no significant differences were found. Most of debris consisted of plastic sheets, fragments, polystyrene pieces, mussels nets and cottons bud sticks, showing that sources are many and include aquaculture, land-based activities and local users of beaches. Average density of benthic litter was 913 items/Km2 (82 Kg/Km2). Plastic dominated in terms of numbers and weight, and consisted mainly of bags, sheets and mussel nets. The highest density was found close to the coast, and sources driving the major differences in litter distribution were mussel farms and shipping lanes. Litter ingestion occurred in 47% of examined fish, mainly consisting of fibers. Among species, S. pilchardus swallowed almost all debris categories. Findinds may provide a baseline to set the necessary measures to manage and minimize marine litter in the Western Adriatic region and to protect aquatic life from plastic pollution, even accounting the possible implications on human health.

Using sclerochronology to estimate the growth rate in Pinna nobilis: a case study of Les Alfaques Bay population (Ebro Delta, Spain).

Pinna nobilis is the biggest Mediterranean bivalve, endemic and semi-infaunal. Provide hard substrates to colonize, increasing the spatial heterogeneity of the softbottom communities. P. nobilis suffer a drastic decline due to the anthropogenic pressures. It’s included in the Habitats Directive, in the Barcelona Convention, and in the red lists of many Mediterranean countries. Estimates the growth rate allows to understand the population dynamics of species and yield knowledge to improve protection efforts. In this study a new methodology based on sclerochronology was used to estimate the age and the growth rate of a P. nobilis population located in Les Alfaques bay. The shells of 35 specimens were cataloged. A subsample of 20 individuals was selected, and one valve of each specimens was cut into radial sections along PAMS (Posterior Adductor Muscle Scar) to study the inner register. Thus, the positions of PAMS obscured by nacre were identified, and the number of missing records was estimated by the width of the calcitic layer in the anterior part of the shell. The first growth curve for the Les Alfaques bay population was calculated from the length/age data. To simulate the growth rate of this population, the growth model based on the modified Von Bertalanffy equation was used. Shallow water usually hosts small sized populations of P. nobilis, while in deeper waters specimens reaches larger size. In Les Alfaques bay the population is composed by large size individuals though it’s located in shallows waters. This unusual size pattern is probably due to a sand bar that offers protection from hydrodynamic stress, allowing individuals to elongate more. This study contributes to the knowledge on P. nobilis biology and, with the aim to monitor this species, the growth curve could be used as baseline for future studies on habitat characteristics that may affect the population structure and dynamics in Les Alfaques Bay.

Spatial-temporal variability of the benthic communities in Ravenna harbour using Autonomous Reef Monitoring Structures (ARMS) with focus on Non-Indigenous Species (NIS)

A Non-Indigenous Species (NIS) is defined as an organism, introduced outside its natural past or present range of distribution by humans, that successfully survives, reproduces, and establish in the new environment. Harbors and tourist marinas are considered NIS hotspots, as they are departure and arrival points for numerous vessels and because of the presence of free artificial substrates, which facilitate colonization by NIS. To early detect the arrival of new NIS, monitoring benthic communities in ports is essential. Autonomous Reef Monitoring Structures (ARMS) are standardized passive collectors that are used to assess marine benthic communities. Here we use an integrative approach based on multiple 3-month ARMS deployment (from April 2021 to October 2022) to characterize the benthic communities (with a focus on NIS) of two sites: a commercial port (Harbor) and a touristic Marina (Marina) of Ravenna. The colonizing sessile communities were assessed using percentage coverage of the taxa trough image analyses and vagile fauna (> 2 mm) was identified morphologically using a stereomicroscope and light microscope. Overall, 97 taxa were identified and 19 of them were NIS. All NIS were already observed in port environments in the Mediterranean Sea, but for the first time the presence of the polychaete Schistomeringos cf. japonica (Annenkova, 1937) was observed; however molecular analysis is needed to confirm its identity. Harbor and Marina host significantly different benthic communities, with significantly different abundance depending on the sampling period. While the differences between sites are related to their different environmental characteristic and their anthropogenic pressures, differences among times seems related to the different life cycle of the main abundant species. This thesis evidenced that ARMS, together with integrative taxonomic approaches, represent useful tools to early detect NIS and could be used for a long-term monitoring of their presence.

Spatio-temporal diversity of Megistozoobenthos in the Antalya Gulf and relationships with environmental features

Antalya Gulf is situated in the Levantine Sea, the second biggest and most eastern basin in the Mediterranean Sea. This area is an ultra-oligotrophic basin, strongly affected by anthropogenic inputs, in particular in the fishing areas. For this characteristic, in the Levantine Sea, there is a strong pressure on the natural resources and benthic assemblages. Furthermore, many alien species enter from Suez Canal and are well established in the area. All these pressures are leading to a degradation of the Levantine Sea. For this reason it is important to have tools to study and monitoring the functioning of the marine ecosystem. Benthic organisms are superior to many other biological groups for their response to environmental stresses. The variability of benthic assemblages on a site can reflect, in an integrative mode, the entire functioning of the marine ecosystem. In this study, that wants to analyze the spatial and temporal distribution of the benthic macrofaunal assemblages of Antalya Gulf, 90 benthic species divided in 8 taxa (Annelida, Cnidaria, Echinodermata, Echiura, Mollusca, Porifera, Sipunculida and Tunicata) were found. All the analyses conducted on the entire benthic class and later on Mollusca and Echinodermata separately highlighted the importance of depth on structuring benthic community.

Preparation and assessment of immobilized laccase-based micro- and nanocatalysts for the degradation of anthropogenic compounds

Since the dawn of its presence on earth, the human being has been able to exploit the enzymes for its subsistence. More recent is the meeting between the enzymatic processes and the urgent need for technologies that aim to preserve our planet. In this field nowadays enzymatic catalysis is tested either to depollution/remediation as well as waste disposal. The work presented in this thesis, regarding both these two topics, is tailored on two European projects (EU 2020), MADFORWATER and TERMINUS respectively. Firstly, production of micro- and nanocatalysts via immobilization of laccases (a lignin-degrader enzyme) is performed. In the second part of the thesis laccase is applied to a tertiary treatment of wastewater with the aim to degrade 9 pharmaceutical active compounds in batch reactors. Despite several optimizations, poor degradation is reached and we did not proceed with the study of different bioreactor setups. Therefore, the focus is moved to a project concerning the production of smart multi-layer plastic packaging containing enzymes to improve the possibilities of recycling. In this field shielded nanocatalysts produced via coating techniques able to interact with redox mediators are investigated. The target substrate in this second project is produced in laboratory (i.e. polyurethane like compounds), starting from monomers whose degradation had already been tested, as a proof of concept. The first enzyme studied is still the laccase.

Mappatura degli habitat bentonici dei canali di marea della Laguna di Venezia tramite strumenti acustici e tecniche di ground-truth

The Venice Lagoon is a complex, heterogeneous and highly dynamic system, subject to anthropogenic and natural pressures that deeply affect the functioning of this ecosystem. Thanks to the development of acoustic technologies, it is possible to obtain maps with a high resolution that describe the characteristics of the seabed. With this aim, a high resolution Multibeam Echosounder (MBES) bathymetry and backscatter survey was carried out in 2021 within the project Research Programme Venezia 2021. Ground-truthing samples were collected in 24 sampling sites to characterize the seafloor and validate the maps produced with the MBES acoustic data. Ground-truthing included the collection of sediment samples for particle size analysis and video footage of the seabed to describe the biological component. The backscatter data was analysed using the unsupervised Jenks classification. We created a map of the habitats integrating morphological, granulometric and biological data in a GIS environment. The results obtained in this study were compared to those collected in 2015 as part of the National Flagship Project RITMARE. Through the comparison of the repeated morpho-bathymetric surveys over time we highlighted the changes of the seafloor geomorphology, sediment, and habitat distribution. We observed different type of habitats and the presence of areas characterized by erosive processes and others in which deposition occurred. These effects led to changes in the benthic communities and in the type of sediment. The combination of the MBES surveys, the ground truth data and the GIS methodology, permitted to construct high-resolution maps of the seafloor and proved to be effective implement for monitoring an extremely dynamic area. This work can contribute not only to broaden the knowledge of transitional environments, but also to their monitor and protection.

Steel hopper silos filled with granular material: experimental tests on the tensile resistance of corrugated sheets and on the filling and discharging pressures

This thesis addresses various aspects related to silos, from the strength of some structural parts to internal actions due to grain. Two hopper silo models were mainly studied, so the thesis is divided into two parts. The first part focuses only on the silo cylinder and deals with the collapse of a silo due to failure of the vertical walls. We had the opportunity to access data from a real silo and perform tensile tests on corrugated sheets. The theoretical and experimental resistance of the corrugated sheet forming the silo cylinder was studied. The resistance was then compared with the internal actions due to grain prescribed by various standards. The second part, however, focused on the hopper of a silo in which a load test (loading and unloading of the silo) was performed. Through the test data, an attempt was made to reproduce the pressures normal to the hopper through analytical reasoning. The experimental pressures were then compared with the theoretical pressures predicted by the standards. In addition, with mathematical reasoning, an attempt was made to reproduce the horizontal pressure on the vertical walls of the silo from the experimental normal pressure in the hopper. In fact, the test was related only to the hopper part and not to the silo cylinder.