Waste management in Forlì-Cesena province: Life Cycle Assessment (LCA) of Forlì incinerator

This work assesses the environmental impact of a municipal solid waste incinerator with energy recovery in Forlì-Cesena province (Emilia-Romagna region, Italy). The methodology used is Life Cycle Assessment (LCA). As the plant already applies the best technologies available in waste treatment, this study focuses on the fate of the residues (bottom and fly ash) produced during combustion. Nine scenarios are made, based on different ash treatment disposing/recycling techniques. The functional unit is the amount of waste incinerated in 2011. Boundaries are set from waste arrival in the plant to the disposal/recovery of the residues produced, with energy recovery. Only the operative period is considered. Software used is GaBi 4 and the LCIA method used is CML2001. The impact categories analyzed are: abiotic depletion, acidification, eutrophication, freshwater aquatic ecotoxicity, global warming, human toxicity, ozone layer depletion, photochemical oxidant formation, terrestrial ecotoxicity and primary energy demand. Most of the data are taken from Herambiente. When primary data are not available, data from Ecoinvent and GaBi databases or literature data are used. The whole incineration process is sustainable, due to the relevant avoided impact given by co-generator. As far as regards bottom ash treatment, the most influential process is the impact savings from iron recovery. Bottom ash recycling in road construction or as building material are both valid alternatives, even if the first option faces legislative limits in Italy. Regarding fly ash inertization, the adding of cement and Ferrox treatment results the most feasible alternatives. However, this inertized fly ash can maintain its hazardous nature. The only method to ensure the stability of an inertized fly ash is to couple two different stabilization treatments. Ash stabilization technologies shall improve with the same rate of the flexibility of the national legislation about incineration residues recycling.

Life cycle assessment (LCA) of a bio-fuel cell fed with waste biomass: potential for scale-up and process optimization

In this Thesis, a life cycle analysis (LCA) of a biofuel cell designed by a team from the University of Bologna was done. The purpose of this study is to investigate the possible environmental impacts of the production and use of the cell and a possible optimization for an industrial scale-up. To do so, a first part of the paper was devoted to studying the present literature on biomass, and fuel cell treatments and then LCA studies on them. The experimental part presents the work done to create the Life Cycle Inventory and Life Cycle Impact Assessment. Several alternative scenarios were created to study process optimization. Reagents and energy supply were changed. To examine whether this technology can be competitive, a comparison was made with some biofuel cell use scenarios with traditional biomass treatment technologies. The result of this study is that this technology is promising from an environmental point of view in case it is possible to recover nutrients in output, without excessive energy consumption, and to minimize the use of energy used to prepare the solution.

Life Cycle Assessment comparativo tra il processo di co-digestione della frazione organica dei rifiuti solidi urbani e dei fanghi di depurazione disidratati e il sistema di gestione attuale. Il caso di Bagnacavallo (RA)

Waste management is becoming, year after year, always more important both for the costs associated with it and for the ever increasing volumes of waste generated. The discussion on the fate of organic fraction of municipal solid waste (OFMSW) leads everyday to new solutions. Many alternatives are proposed, ranging from incineration to composting passing through anaerobic digestion. “For Biogas” is a collaborative effort, between C.I.R.S.A. and R.E.S. cooperative, whose main goal is to generate “green” energy from both biowaste and sludge anaerobic co-digestion. Specifically, the project include a pilot plant receiving dewatered sludge from both urban and agro-industrial sewage (DS) and the organic fraction of MSW (in 2/1 ratio) which is digested in absence of oxygen to produce biogas and digestate. Biogas is piped to a co-generation system producing power and heat reused in the digestion process itself, making it independent from the national grid. Digestate undergoes a process of mechanical separation giving a liquid fraction, introduced in the treatment plant, and a solid fraction disposed in landfill (in future it will be further processed to obtain compost). This work analyzed and estimated the impacts generated by the pilot plant in its operative phase. Once the model was been characterized, on the basis of the CML2001 methodology, a comparison is made with the present scenario assumed for OFMSW and DS. Actual scenario treats separately the two fractions: the organic one is sent to a composting plant, while sludge is sent to landfill. Results show that the most significant difference between the two scenarios is in the GWP category as the project "For Biogas" is able to generate “zero emission” power and heat. It also generates a smaller volume of waste for disposal. In conclusion, the analysis evaluated the performance of two alternative methods of management of OFMSW and DS, highlighting that "For Biogas" project is to be preferred to the actual scenario.

Life Cycle Assessment di un impianto integrato di trattamento della frazione organica dei rifiuti. Il caso di Voltana di Lugo (RA)

La metodologia Life Cycle Assessment (LCA) è un metodo oggettivo di valutazione e quantificazione dei carichi energetici ed ambientali e degli impatti potenziali associati ad un processo o attività produttiva lungo l’intero ciclo di vita. Il lavoro presentato in questa tesi ha avuto come obiettivo l’analisi del ciclo di vita dell’impianto di trattamento della FORSU (la frazione organica di rifiuti solidi urbani) di Voltana di Lugo, in provincia di Ravenna. L’impianto attuale si basa sull'utilizzo accoppiato di digestione anaerobica a secco (sistema DRY) e compostaggio. Si è voluto inoltre effettuare il confronto fra questo scenario con quello antecedente al 2012, in cui era presente solamente il processo di compostaggio classico e con uno scenario di riferimento in cui si è ipotizzato che tutto il rifiuto trattato potesse essere smaltito in discarica. L’unità funzionale considerata è stata “le tonnellate di rifiuto trattate in un mese“, pari a 2750 t. L’analisi di tutti i carichi energetici ed ambientali dell’impianto di Voltana di Lugo è stata effettuata con l’ausilio di “GaBi 5”, un software di supporto specifico per gli studi di LCA. Dal confronto fra lo scenario attuale e quello precedente è emerso che la configurazione attuale dell’impianto ha delle performance ambientali migliori rispetto alla vecchia configurazione, attiva fino a Dicembre 2012, e tutte e due sono risultate nettamente migliori rispetto allo smaltimento in discarica. I processi che hanno influenzato maggiormente gli impatti sono stati: lo smaltimento del sovvallo in discarica e la cogenerazione, con produzione di energia elettrica da biogas. Il guadagno maggiore, per quanto riguarda lo scenario attuale rispetto a quello precedente, si è avuto proprio dal surplus di energia elettrica prodotta dal cogeneratore, altrimenti prelevata dal mix elettrico nazionale.

Preparation and assessment of immobilized laccase-based micro- and nanocatalysts for the degradation of anthropogenic compounds

Since the dawn of its presence on earth, the human being has been able to exploit the enzymes for its subsistence. More recent is the meeting between the enzymatic processes and the urgent need for technologies that aim to preserve our planet. In this field nowadays enzymatic catalysis is tested either to depollution/remediation as well as waste disposal. The work presented in this thesis, regarding both these two topics, is tailored on two European projects (EU 2020), MADFORWATER and TERMINUS respectively. Firstly, production of micro- and nanocatalysts via immobilization of laccases (a lignin-degrader enzyme) is performed. In the second part of the thesis laccase is applied to a tertiary treatment of wastewater with the aim to degrade 9 pharmaceutical active compounds in batch reactors. Despite several optimizations, poor degradation is reached and we did not proceed with the study of different bioreactor setups. Therefore, the focus is moved to a project concerning the production of smart multi-layer plastic packaging containing enzymes to improve the possibilities of recycling. In this field shielded nanocatalysts produced via coating techniques able to interact with redox mediators are investigated. The target substrate in this second project is produced in laboratory (i.e. polyurethane like compounds), starting from monomers whose degradation had already been tested, as a proof of concept. The first enzyme studied is still the laccase.

Development of urease enzyme inhibitors and assessment of their efficacy and ecotoxicity

This work study proposes novel and natural inhibitors of the enzyme urease, as more sustainable alternatives to the synthetic ones. Specifically, Deep Eutectic Solvents (DES) were used as an extractants and carriers of polyphenols extracted from waste biomass enriched in antioxidant compounds. The polyphenolic extracts with DES have been tested on lab-scale experiments to verify their effect on the reduction of the hydrolysis rate of urea-based fertilizers catalyzed by urease. The phytotoxicity and the soil ecotoxicity of DES and polyphenols formulations were then tested. DES resulted promising in terms of polyphenols extraction ability from biomass and as carriers of bioactive compounds in the agricultural field, showing non-damaging effects on plants (Avena sativa) and microarthropods in soil.