Studio ed analisi della sicurezza del protocollo SIP nelle reti Voice over IP

Nell'era di Internet e della digitalizzazione, anche la telefonia ha avuto la possibilità di evolversi, e grazie alle tecnologie Voice-over-IP è stato possibile realizzare servizi di comunicazione avanzata su reti di dati. Anche se la comunicazione vocale è l'aspetto chiave di questi sistemi, le reti VoIP supportano altri tipi di servizi, tra cui video, messaggistica istantanea, condivisione di file, ecc. Il successo di questa nuova tipologia di rete è dovuto ad una migliore flessibilità rispetto ai vecchi sistemi analogici, grazie ad architetture aperte e implementazioni a livello software, e soprattutto ad un minor costo legato alle apparecchiature ed ai collegamenti utilizzati, ed ai nuovi modelli di business e di consumo sempre più orientati allo sfruttamento della connettività a banda larga. Tuttavia, l'implementazione dei sistemi VoIP rappresenta anche un grado di complessità maggiore in termini di architetture di rete, di protocolli, e di implementazione, e con questo ne segue un incremento delle possibili vulnerabilità. Una falla nella sicurezza in questi sistemi può portare a disservizi e violazione della privacy per gli utenti con conseguenti ripercussioni economiche per i relativi gestori. La tesi analizza la sicurezza delle reti VoIP concentrandosi sul protocollo che sta alla base dei servizi multimediali, il protocollo SIP. SIP è un protocollo di livello applicativo realizzato per creare, modificare e terminare delle sessioni multimediali tra due o più utenti. Dopo un'introduzione alle generalità del protocollo, vengono esaminate le classi di vulnerabilità delle reti VoIP e gli attacchi a SIP, e vengono presentate alcune contromisure attuabili. Viene mostrato un esempio di come vengano attuati alcuni dei principali attacchi a SIP tramite l'utilizzo di appositi strumenti. L'eborato conclude con alcune considerazioni sulle minacce al protocollo e sugli obiettivi futuri che la comunità scientifica dovrebbe perseguire.

Characterization of X-ray detectors based on organic semiconducting single crystals

Negli anni recenti, lo sviluppo dell’elettronica organica ha condotto all’impiego di materiali organici alla base di numerosi dispositivi elettronici, quali i diodi ad emissione di luce, i transistor ad effetto di campo, le celle solari e i rivelatori di radiazione. Riguardo quest’ultimi, gli studi riportati in letteratura si riferiscono per la maggiore a dispositivi basati su materiali organici a film sottile, che tuttavia presentano problemi relativi ad instabilità e degradazione. Come verrà illustrato, l’impiego di singoli cristalli organici come materiali alla base di questi dispositivi permette il superamento delle principali limitazioni che caratterizzano i rivelatori basati su film sottili. In questa attività sperimentale, dispositivi basati su cristalli organici semiconduttori verranno caratterizzati in base alle principali figure di merito dei rivelatori. Tra i campioni testati, alcuni dispositivi basati su singoli cristalli di 6,13-bis (triisopropylsilylethynyl)-pentacene (TIPS-Pentacene) e 5,6,11,12-tetraphenyltetracene (Rubrene) hanno mostrato interessanti proprietà e sono stati quindi maggiormente studiati.

Novel materials for direct X-ray detectors based on semiconducting organic polymers

Conventional inorganic materials for x-ray radiation sensors suffer from several drawbacks, including their inability to cover large curved areas, me- chanical sti ffness, lack of tissue-equivalence and toxicity. Semiconducting organic polymers represent an alternative and have been employed as di- rect photoconversion material in organic diodes. In contrast to inorganic detector materials, polymers allow low-cost and large area fabrication by sol- vent based methods. In addition their processing is compliant with fexible low-temperature substrates. Flexible and large-area detectors are needed for dosimetry in medical radiotherapy and security applications. The objective of my thesis is to achieve optimized organic polymer diodes for fexible, di- rect x-ray detectors. To this end polymer diodes based on two different semi- conducting polymers, polyvinylcarbazole (PVK) and poly(9,9-dioctyluorene) (PFO) have been fabricated. The diodes show state-of-the-art rectifying be- haviour and hole transport mobilities comparable to reference materials. In order to improve the X-ray stopping power, high-Z nanoparticle Bi2O3 or WO3 where added to realize a polymer-nanoparticle composite with opti- mized properities. X-ray detector characterization resulted in sensitivties of up to 14 uC/Gy/cm2 for PVK when diodes were operated in reverse. Addition of nanoparticles could further improve the performance and a maximum sensitivy of 19 uC/Gy/cm2 was obtained for the PFO diodes. Compared to the pure PFO diode this corresponds to a five-fold increase and thus highlights the potentiality of nanoparticles for polymer detector design. In- terestingly the pure polymer diodes showed an order of magnitude increase in sensitivity when operated in forward regime. The increase was attributed to a different detection mechanism based on the modulation of the diodes conductivity.

Construction and detectors’ characterization of a new detection system for FAMU Experiment

From 2010, the Proton Radius has become one of the most interest value to determine. The first proof of not complete understanding of its internal structure was the measurement of the Lamb Shift using the muonic hydrogen, leading to a value 7σ lower. A new road so was open and the Proton Radius Puzzle epoch begun. FAMU Experiment is a project that tries to give an answer to this Puzzle implementing high precision experimental apparatus. The work of this thesis is based on the study, construction and first characterization of a new detection system. Thanks to the previous experiments and simulations, this apparatus is composed by 17 detectors positioned on a semicircular crown with the related electronic circuit. The detectors' characterization is based on the use of a LabView program controlling a digital potentiometer and on other two analog potentiometers, all three used to set the amplitude of each detector to a predefined value, around 1.2 V, set on the oscilloscope by which is possible to observe the signal. This is the requirement in order to have, in the final measurement, a single high peak given by the sum of all the signals coming from the detectors. Each signal has been acquired for almost half of an hour, but the entire circuit has been maintained active for more time to observe its capacity to work for longer periods. The principal results of this thesis are given by the spectra of 12 detectors and the corresponding values of Voltages, FWHM and Resolution. The outcomes of the acquisitions show also another expected behavior: the strong dependence of the detectors from the temperature, demonstrating that an its change causes fluctuations in the signal. In turn, these fluctuations will affect the spectrum, resulting in a shifting of the curve and a lower Resolution. On the other hand, a measurement performed in stable conditions will lead to accordance between the nominal and experimental measurements, as for the detectors 10, 11 and 12 of our system.

Detectors in black hole quantum coherent states

The corpuscular model describes black holes as leaky bound states of gravitons. To account for the role of matter, a coherent state is built and a semiclassical description is given to the gravitational field by connecting the classical source with the quantum state for gravitons. The properties of this state can be analysed with the help of an Unruh-DeWitt detector, coupled to the quantum state of the system. The presence of a detector in general regularises the usual diverging behaviour of the field in the deep ultraviolet region, and will allow us to probe the coherent state structure and the graviton emission. In particular, a Newtonian analogue of the Unruh effect will be discussed and the coherent state will be modified to properly account for the spherical symmetry of the potential at the level of the quantum state. This correction will ensure that vacuum contributions responsible for the Unruh thermal spectrum are present in a coherent state emission process.

Voice conversion with pre-trained representations for audio anonymization

The recording and processing of voice data raises increasing privacy concerns for users and service providers. One way to address these issues is to move processing on the edge device closer to the recording so that potentially identifiable information is not transmitted over the internet. However, this is often not possible due to hardware limitations. An interesting alternative is the development of voice anonymization techniques that remove individual speakers characteristics while preserving linguistic and acoustic information in the data. In this work, a state-of-the-art approach to sequence-to-sequence speech conversion, ini- tially based on x-vectors and bottleneck features for automatic speech recognition, is explored to disentangle the two acoustic information using different pre-trained speech and speakers representation. Furthermore, different strategies for selecting target speech representations are analyzed. Results on public datasets in terms of equal error rate and word error rate show that good privacy is achieved with limited impact on converted speech quality relative to the original method.

The FAMU experiment: characterization of innovative detectors for high precision spectroscopy

The incompatibility between the proton radius values measured in recent years has given rise to what is now called the proton radius puzzle. This discrepancy is nowadays without explanation. In order to find a solution to the proton radius puzzle a new experiment has been proposed. The aim of this experiment, called FAMU, is to obtain a new and more precise measure of the Zemach radius of the proton, ie the quantity that has the highest uncertainty in high precision spectroscopy. If this measurement confirmed the results obtained before 2010, the starting date of the puzzle, then the discrepancy would be caused by procedural errors or ignored corrections. Otherwise, the new value would indicate the presence of new physics still unkown.