Hardware-In-The Loop setup and test of an air spring control system

In this work, a Hardware-in-the-loop test bench is designed. The bench is used to test the behaviour of an electronic control unit used in Maserati to control the dynamics of an air spring system. First the mathematical model of the plant has been defined, then the simulation enviroment and the test environment have been set up. The performed tests succesfully highlighted some bugs in the device under test.

Hardware-in-the-loop implementation of single- and dual-phase shift control for dual active bridge converters in EV applications

Isolated DC-DC converters play a significant role in fast charging and maintaining the variable output voltage for EV applications. This study aims to investigate the different Isolated DC-DC converters for onboard and offboard chargers, then, once the topology is selected, study the control techniques and, finally, achieve a real-time converter model to accomplish Hardware-In-The-Loop (HIL) results. Among the different isolated DC-DC topologies, the Dual Active Bridge (DAB) converter has the advantage of allowing bidirectional power flow, which enables operating in both Grid to Vehicle (G2V) and Vehicle to Grid (V2G) modalities. Recently, DAB has been used in the offboard chargers for high voltage applications due to SiC and GaN MOSFETs; this new technology also allows the utilization of higher switching frequencies. By empowering soft switching techniques to reduce switching losses, higher switching frequency operation is possible in DAB. There are four phase shift control techniques for the DAB converter. They are Single Phase shift, Extended Phase shift, Dual Phase shift, Triple Phase shift controls. This thesis considers two control strategies; Single-Phase, and Dual-Phase shifts, to understand the circulating currents, power losses, and output capacitor size reduction in the DAB. Hardware-In-The-Loop (HIL) experiments are carried out on both controls with high switching frequencies using the PLECS software tool and the RT box supporting the PLECS. Root Mean Square Error is also calculated for steady-state values of output voltage with different sampling frequencies in both the controls to identify the achievable sampling frequency in real-time. DSP implementation is also executed to emulate the optimized DAB converter design, and final real-time simulation results are discussed for both the Single-Phase and Dual-Phase shift controls.

Analysis, Design, and Hardware-in-the-Loop Validation of Multi-Active Bridge Converters

This master's thesis investigates different aspects of Dual-Active-Bridge (DAB) Converter and extends aspects further to Multi-Active-Bridges (MAB). The thesis starts with an overview of the applications of the DAB and MAB and their importance. The analytical part of the thesis includes the derivation of the peak and RMS currents, which is required for finding the losses present in the system. The power converters, considered in this thesis are DAB, Triple-Active Bridge (TAB) and Quad-Active Bridge (QAB). All the theoretical calculations are compared with the simulation results from PLECS software for identifying the correctness of the reviewed and developed theory. The Hardware-in-the-Loop (HIL) simulation is conducted for checking the control operation in real-time with the help of the RT box from the Plexim. Additionally, as in real systems digital signal processor (DSP), system-on-chip or field programmable gate array is employed for the control of the power electronic systems, and the execution of the control in the real-time simulation (RTS) conducted is performed by DSP.

Virtual Calibration of CO2 and Pollutant Emissions of a High-Performance PHEV using Model-in-the-Loop Methodology

The study analyses the calibration process of a newly developed high-performance plug-in hybrid electric passenger car powertrain. The complexity of modern powertrains and the more and more restrictive regulations regarding pollutant emissions are the primary challenges for the calibration of a vehicle’s powertrain. In addition, the managers of OEM need to know as earlier as possible if the vehicle under development will meet the target technical features (emission included). This leads to the necessity for advanced calibration methodologies, in order to keep the development of the powertrain robust, time and cost effective. The suggested solution is the virtual calibration, that allows the tuning of control functions of a powertrain before having it built. The aim of this study is to calibrate virtually the hybrid control unit functions in order to optimize the pollutant emissions and the fuel consumption. Starting from the model of the conventional vehicle, the powertrain is then hybridized and integrated with emissions and aftertreatments models. After its validation, the hybrid control unit strategies are optimized using the Model-in-the-Loop testing methodology. The calibration activities will proceed thanks to the implementation of a Hardware-in-the-Loop environment, that will allow to test and calibrate the Engine and Transmission control units effectively, besides in a time and cost saving manner.

Simulazioni Software-In-the-Loop per la verifica funzionale di un sistema di tracking satellitare (ALMATracker)

L'ALMATracker è un sistema di puntamento per la stazione di terra di ALMASat-1. La sua configurazione non segue la classica Azimuth-Elevazione, bensì utilizza gli assi α-β per evitare punti di singolarità nelle posizioni vicino allo zenit. Ancora in fase di progettazione, utilizzando in congiunta SolidWorks e LabVIEW si è creato un Software-in-the-loop per la sua verifica funzionale, grazie all'utilizzo del relativamente nuovo pacchetto NI Softmotion. Data la scarsa esperienza e documentazione che si hanno su questo recente tool, si è prima creato un Case Study che simulasse un sistema di coordinate cilindriche in modo da acquisire competenza. I risultati conseguiti sono poi stati sfruttati per la creazione di un SIL per la simulazione del movimento dell'ALMATracker. L'utilizzo di questa metodologia di progettazione non solo ha confermato la validità del design proposto, ma anche evidenziato i problemi e le potenzialità che caratterizzano questo pacchetto software dandone un analisi approfondita.

Evoluzione di un sistema di automazione della guida di motoveicoli per test su banco a rulli

Evoluzione di un sistema Hardware in the Loop per l'automazione della guida di motoveicoli su banco a rulli. Questo sistema HIL, simulando un certo tipo di condizioni, permette di svolgere test su strategia centralina, implementate per il controllo motore.

Real-time PMU monitoring of an IEEE 5-Bus Network implemented on OPAL system

This thesis studies the state-of-the-art of phasor measurement units (PMUs) as well as their metrological requirements stated in the IEEE C37.118.1 and C37.118.2 Standards for guaranteeing correct measurement performances. Communication systems among PMUs and their possible applicability in the field of power quality (PQ) assessment are also investigated. This preliminary study is followed by an analysis of the working principle of real-time (RT) simulators and the importance of hardware-in-the-loop (HIL) implementation, examining the possible case studies specific for PMUs, including compliance tests which are one of the most important parts. The core of the thesis is focused on the implementation of a PMU model in the IEEE 5-bus network in Simulink and in the validation of the results using OPAL RT-4510 as a real-time simulator. An initial check allows one to get an idea about the goodness of the results in Simulink, comparing the PMU data with respect to the load-flow steady-state information. In this part, accuracy indices are also calculated for both voltage and current synchrophasors. The following part consists in the implementation of the same code in OPAL-RT 4510 simulator, after which an initial analysis is carried out in a qualitative way in order to get a sense of the goodness of the outcomes. Finally, the confirmation of the results is based on an examination of the attained voltage and current synchrophasors and accuracy indices coming from Simulink models and from OPAL system, using a Matlab script. This work also proposes suggestions for an upcoming operation of PMUs in a more complex system as the Digital Twin (DT) in order to improve the performances of the already-existing protection devices of the distribution system operator (DSO) for a future enhancement of power systems reliability.

Studio e implementazione di un autopilota su un UAV ad ala fissa

Si riporta inizialmente un’analisi tecnica dell’autopilota Ardupilot, utilizzato con il firmware Arduplane, che predispone la scheda all’utilizzo specifico su velivoli senza pilota ad ala fissa. La parte sostanziale della tesi riguarda invece lo studio delle leggi di controllo implementate su Arduplane e la loro modellazione, assieme ad altre parti del codice, in ambiente Matlab Simulink. Il sistema di controllo creato, chiamato Attitude Flight System, viene verificato con la tecnica del Software In the Loop in un simulatore di volo virtuale modellato anch’esso in Simulink, si utilizza la dinamica di un velivolo UAV di prova e il software FlightGear per l’ambiente grafico. Di fondamentale importanza è la verifica della compatibilità fra il firmware originale e il codice generato a partire dai modelli Simulink, verifica effettuata mediante test di tipo Hardware in the Loop. L’ultima parte della tesi descrive le prove di volo svolte per verificare le prestazioni della scheda su un aeromodello trainer.

Catch and by-catch analyses of tropical tuna fishery in the Gulf of Guinea from 2010 to 2012.

Canned tuna is one of the most widespread and recognizable fish commodities in the world. Over all oceans 80% of the total tuna catches are caught by purse seine fishery and in tropical waters their target species are: yellowfin (Thunnus albacares), bigeye (Thunnus obesus) and skipjack (Katsuwonus pelamis). Even if this fishing gear is claimed to be very selective, there are high levels of by-catch especially when operating under Fish Aggregating Devices (FADs). The main problem is underestimation of by-catch data. In order to solve this problem the scientific community has developed many specific programs (e.g. Observe Program) to collect data about both target species and by-catch with observers onboard. The purposes of this study are to estimate the quantity and composition of target species and by-catch by tuna purse seiner fishery operating in tropical waters and to underline a possible seasonal variability in the by-catch ratio (tunas versus by-catch). Data were collected with the French scientific program ”Observe” on board of the French tuna purse seiner “Via Avenir” during a fishing trip in the Gulf of Guinea (C-E Atlantic) from August to September 2012. Furthermore some by-catch specimens have been sampled to obtain more information about size class composition. In order to achieve those purposes we have shared our data with the French Institute of Research for the Development (IRD), which has data collected by observers onboard in the same study area. Yellowfin tuna results to be the main specie caught in all trips considered (around 71% of the total catches) especially on free swimming schools (FSC) sets. Instead skipjack tuna is the main specie caught under FADs. Different percentages of by-catch with the two fishing modes are observed: the by-catch incidence is higher on FADs sets (96.5% of total by-catch) than on FSC sets (3.5%) and the main category of by-catch is little-tuna (73%). When pooling data for both fishing sets used in purse seine fishery the overall by-catch/catch ratio is 5%, a lower level than in other fishing gears like long-lining and trawling.

Proposal of a Continuous Read-out Implementation in the ALICE-TOF detector

The main purpose of ultrarelativistic heavy-ion collisions is the investigation of the QGP. The ALICE experiment situated at the CERN has been specifically designed to study heavy-ion collisions for centre-of-mass energies up to 5.5 per nucleon pair. Extended particle identification capability is one of the main characteristics of the ALICE experiment. In the intermediate momentum region (up to 2.5 GeV/c for pi/K and 4 GeV/c for K/p), charged particles are identified in the ALICE experiment by the Time of Flight (TOF) detector. The ALICE-TOF system is a large-area detector based on the use of Multi-gap Resistive Plate Chamber (MRPC) built with high efficiency, fast response and intrinsic time resolution better than 40 ps. This thesis work, developed with the ALICE-TOF Bologna group, is part of the efforts carried out to adapt the read-out of the detector to the new requirements after the LHC Long Shutdown 2. Tests on the feasibility of a new read-out scheme for the TOF detector have been performed. In fact, the achievement of a continuous read-out also for the TOF detector would not be affordable if one considers the replacement of the TRM cards both for hardware and budget reasons. Actually, the read-out of the TOF is limited at 250 kHz i.e. it would be able to collect up to just a fourth of the maximum collision rate potentially achievable for pp interactions. In this Master’s degree thesis work, I discuss a different read-out system for the ALICE-TOF detector that allows to register all the hits at the interaction rate of 1 MHz foreseen for pp interactions after the 2020, by using the electronics currently available. Such solution would allow the ALICE-TOF detector to collect all the hits generated by pp collisions at 1 MHz interaction rate, which corresponds to an amount four times larger than that initially expected at such frequencies with the triggered read-out system operated at 250 kHz for LHC Run 3. The obtained results confirm that the proposed read-out scheme is a viable option for the ALICE TOF detector. The results also highlighted that it will be advantageous if the ALICE-TOF group also implement an online monitoring system of noisy channels to allow their deactivation in real time.

Energy harvesting from piezoelectric devices embedded in a 3D printed wing

This thesis work has been carried out at Clarkson University in Potsdam NY, USA and involved the design of a low elongation wing, consisting of parts made by polylactide (PLA) using the fused deposition model (FDM) technology of Rapid Prototyping, then assembled together in a thin aluminum spar. The aim of the research is to evaluate the feasibility of collecting electrical energy by converting mechanical energy from the vibration of the wing flutter. With this aim piezoelectric stripes were glued in the inner part of the wing, as well as on the aluminum spar, as monomorphic configuration. During the phases of the project, particular attention was given to the geometry and the materials used, in order to trigger the flutter for low flow velocity. The CAD software SolidWorks® was used for the design of the wing and then the drawings were sent to the Clarkson machine shop in order to to produce the parts required by the wing assembly. FEM simulations were performed, using software MSC NASTRAN/PATRAN®, to evaluate the stiffness of the whole wing as well as the natural vibration modes of the structure. These data, in a first approximation, were used to predict the flutter speed. Finally, experimental tests in the Clarkson wind tunnel facility were carried out in order to validate the results obtained from FEM analysis. The power collected by the piezoelectrics under flutter condition was addressed by tuning the resistors downstream the electronic circuit of the piezoelectrics.

From data to applications in the Internet of Things

Con la crescita in complessità delle infrastrutture IT e la pervasività degli scenari di Internet of Things (IoT) emerge il bisogno di nuovi modelli computazionali basati su entità autonome capaci di portare a termine obiettivi di alto livello interagendo tra loro grazie al supporto di infrastrutture come il Fog Computing, per la vicinanza alle sorgenti dei dati, e del Cloud Computing per offrire servizi analitici complessi di back-end in grado di fornire risultati per milioni di utenti. Questi nuovi scenarii portano a ripensare il modo in cui il software viene progettato e sviluppato in una prospettiva agile. Le attività dei team di sviluppatori (Dev) dovrebbero essere strettamente legate alle attività dei team che supportano il Cloud (Ops) secondo nuove metodologie oggi note come DevOps. Tuttavia, data la mancanza di astrazioni adeguata a livello di linguaggio di programmazione, gli sviluppatori IoT sono spesso indotti a seguire approcci di sviluppo bottom-up che spesso risulta non adeguato ad affrontare la compessità delle applicazione del settore e l'eterogeneità dei compomenti software che le formano. Poichè le applicazioni monolitiche del passato appaiono difficilmente scalabili e gestibili in un ambiente Cloud con molteplici utenti, molti ritengono necessaria l'adozione di un nuovo stile architetturale, in cui un'applicazione dovrebbe essere vista come una composizione di micro-servizi, ciascuno dedicato a uno specifica funzionalità applicativa e ciascuno sotto la responsabilità di un piccolo team di sviluppatori, dall'analisi del problema al deployment e al management. Poichè al momento non si è ancora giunti a una definizione univoca e condivisa dei microservices e di altri concetti che emergono da IoT e dal Cloud, nè tantomento alla definzione di linguaggi sepcializzati per questo settore, la definzione di metamodelli custom associati alla produzione automatica del software di raccordo con le infrastrutture potrebbe aiutare un team di sviluppo ad elevare il livello di astrazione, incapsulando in una software factory aziendale i dettagli implementativi. Grazie a sistemi di produzione del sofware basati sul Model Driven Software Development (MDSD), l'approccio top-down attualmente carente può essere recuperato, permettendo di focalizzare l'attenzione sulla business logic delle applicazioni. Nella tesi viene mostrato un esempio di questo possibile approccio, partendo dall'idea che un'applicazione IoT sia in primo luogo un sistema software distribuito in cui l'interazione tra componenti attivi (modellati come attori) gioca un ruolo fondamentale.

Machine Learning Unsupervised Methods in the Design of an On-board Health Monitoring System for Satellite Applications

The dissertation starts by providing a description of the phenomena related to the increasing importance recently acquired by satellite applications. The spread of such technology comes with implications, such as an increase in maintenance cost, from which derives the interest in developing advanced techniques that favor an augmented autonomy of spacecrafts in health monitoring. Machine learning techniques are widely employed to lay a foundation for effective systems specialized in fault detection by examining telemetry data. Telemetry consists of a considerable amount of information; therefore, the adopted algorithms must be able to handle multivariate data while facing the limitations imposed by on-board hardware features. In the framework of outlier detection, the dissertation addresses the topic of unsupervised machine learning methods. In the unsupervised scenario, lack of prior knowledge of the data behavior is assumed. In the specific, two models are brought to attention, namely Local Outlier Factor and One-Class Support Vector Machines. Their performances are compared in terms of both the achieved prediction accuracy and the equivalent computational cost. Both models are trained and tested upon the same sets of time series data in a variety of settings, finalized at gaining insights on the effect of the increase in dimensionality. The obtained results allow to claim that both models, combined with a proper tuning of their characteristic parameters, successfully comply with the role of outlier detectors in multivariate time series data. Nevertheless, under this specific context, Local Outlier Factor results to be outperforming One-Class SVM, in that it proves to be more stable over a wider range of input parameter values. This property is especially valuable in unsupervised learning since it suggests that the model is keen to adapting to unforeseen patterns.