Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

A study on set variable representations in constraint programming

Il lavoro presentato in questa tesi si colloca nel contesto della programmazione con vincoli, un paradigma per modellare e risolvere problemi di ricerca combinatoria che richiedono di trovare soluzioni in presenza di vincoli. Una vasta parte di questi problemi trova naturale formulazione attraverso il linguaggio delle variabili insiemistiche. Dal momento che il dominio di tali variabili può essere esponenziale nel numero di elementi, una rappresentazione esplicita è spesso non praticabile. Recenti studi si sono quindi focalizzati nel trovare modi efficienti per rappresentare tali variabili. Pertanto si è soliti rappresentare questi domini mediante l'uso di approssimazioni definite tramite intervalli (d'ora in poi rappresentazioni), specificati da un limite inferiore e un limite superiore secondo un'appropriata relazione d'ordine. La recente evoluzione della ricerca sulla programmazione con vincoli sugli insiemi ha chiaramente indicato che la combinazione di diverse rappresentazioni permette di raggiungere prestazioni di ordini di grandezza superiori rispetto alle tradizionali tecniche di codifica. Numerose proposte sono state fatte volgendosi in questa direzione. Questi lavori si differenziano su come è mantenuta la coerenza tra le diverse rappresentazioni e su come i vincoli vengono propagati al fine di ridurre lo spazio di ricerca. Sfortunatamente non esiste alcun strumento formale per paragonare queste combinazioni. Il principale obiettivo di questo lavoro è quello di fornire tale strumento, nel quale definiamo precisamente la nozione di combinazione di rappresentazioni facendo emergere gli aspetti comuni che hanno caratterizzato i lavori precedenti. In particolare identifichiamo due tipi possibili di combinazioni, una forte ed una debole, definendo le nozioni di coerenza agli estremi sui vincoli e sincronizzazione tra rappresentazioni. Il nostro studio propone alcune interessanti intuizioni sulle combinazioni esistenti, evidenziandone i limiti e svelando alcune sorprese. Inoltre forniamo un'analisi di complessità della sincronizzazione tra minlex, una rappresentazione in grado di propagare in maniera ottimale vincoli lessicografici, e le principali rappresentazioni esistenti.

A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

Progettazione e sviluppo di applicazioni di augmented reality interattive

Nel 2011, circa 5 milioni di persone usavano regolarmente applicativi mobi-le basati su qualche forma di realtà aumentata. Secondo alcune previsioni entro il 2020 servizi che sfruttano questa tecnologia avranno una base di utenti che rasenta un settimo della popolazione mondiale, rendendo di fatto la realtà aumentata l’ottavo mezzo di comunicazione di massa dopo la stampa, l’audio registrato, il cinema, la radio, la televisione, internet ed infine i servizi multimediali mobile. La tesi si propone di illustrare le caratteristiche di questa tecnologia distinguendo varie tecniche e strumenti a disposizione degli sviluppatori per costruire l’esperienza di augmented reality. Entrando nel merito dello sviluppo software si analizza una architettura di riferimento proposta per sistemi di realtà aumentata e pattern per lo sviluppo dei diversi componenti. Infine vengono confrontati gli SDK oggi più diffusi cercando di evidenziarne caratteristiche comuni e peculiarità.

Feedback linearization of antagonistically actuated variable stiffness joints with twisted string actuators

The work of this thesis is on the implementation of a variable stiffness joint antagonistically actuated by a couple of twisted-string actuator (TSA). This type of joint is possible to be applied in the field of robotics, like UB Hand IV (the anthropomorphic robotic hand developed by University of Bologna). The purposes of the activities are to build the joint dynamic model and simultaneously control the position and stiffness. Three different control approaches (Feedback linearization, PID, PID+Feedforward) are proposed and validated in simulation. To improve the properties of joint stiffness, a joint with elastic element is taken into account and discussed. To the end, the experimental setup that has been developed for the experimental validation of the proposed control approaches.

Studio di Augmented World come Paradigma di Progettazione di Sistemi basati su Realtà Aumentata e Pervasive Computing - Verso la Definizione di un Modello

L’obiettivo della tesi è definire un modello che permetta di realizzare applicazioni che integrino diverse tecnologie come la realtà aumentata, pervasive computing e Internet of Things. In particolare si analizza la nozione di "augmentation" che indica un’estensione e un arricchimento delle funzionalità e delle informazioni che possono essere percepite dai sensi umani e che può essere ritrovata, in modo diverso, nelle tecnologie trattate. A tal proposito, si introduce l’idea di augmented world, il cui scopo è quello di realizzare un livello aumentato collegato ad un livello fisico, attraverso il quale permettere l’interazione tra elementi virtuali ed elementi fisici. In seguito, tramite un'analisi tassonomica si vogliono individuare le caratteristiche ed i requisiti fondanti degli ambiti applicativi trattati per poter definire un modello che possa essere utilizzato come riferimento per le diverse tipologie di applicazioni. Infine il modello proposto è stato applicato a diversi casi di studio che spaziano tra i principali contesti applicativi in cui vengono utilizzate le tecnologie illustrate. La modellazione è fatta prescindendo da alcuni aspetti relativi alla comunicazione o alla sincronizzazione tra livello reale e livello aumentato, in quanto l’obiettivo è esporre una prima validazione del modello che permetta di riscontrarne l’adeguatezza ed eventuali limiti per una futura raffinazione.