Design of a wearable platform for PPG analysis with multicore low-power processor

Photoplethysmography (PPG) sensors allow for noninvasive and comfortable heart-rate (HR) monitoring, suitable for compact wearable devices. However, PPG signals collected from such devices often suffer from corruption caused by motion artifacts. This is typically addressed by combining the PPG signal with acceleration measurements from an inertial sensor. Recently, different energy-efficient deep learning approaches for heart rate estimation have been proposed. To test these new solutions, in this work, we developed a highly wearable platform (42mm x 48 mm x 1.2mm) for PPG signal acquisition and processing, based on GAP9, a parallel ultra low power system-on-chip featuring nine cores RISC-V compute cluster with neural network accelerator and 1 core RISC-V controller. The hardware platform also integrates a commercial complete Optical Biosensing Module and an ARM-Cortex M4 microcontroller unit (MCU) with Bluetooth low-energy connectivity. To demonstrate the capabilities of the system, a deep learning-based approach for PPG-based HR estimation has been deployed. Thanks to the reduced power consumption of the digital computational platform, the total power budget is just 2.67 mW providing up to 5 days of operation (105 mAh battery).

Sviluppo di Applicazioni Mobile Platform-independent: il Linguaggio e Piattaforma Mobl

L’obbiettivo di questa tesi consiste in un analisi dello sviluppo di applicazioni mobile, rivolgendo particolare attenzione riguardo a quelle soluzioni che consentono di astrarre dall’ambiente su cui effettivamente queste verranno eseguite, per poi prendere in esame la piattaforma e il linguaggio Mobl. Sarà quindi necessario effettuare una panoramica sullo stato attuale del mercato, introducendo i diversi sistemi presenti e le metodologie proposte per la costruzione del software. Da questo studio sarà possibile ricavare i pregi e i difetti di una programmazione nativa. Volendo, in seguito, ricercare un processo di produzione software che favorisca un’indipendenza dai sistemi precedentemente descritti, verranno illustrati alcuni tra i più importanti Mobile Frameworks e tra questi si prenderà in esame Mobl, che si contraddistingue grazie a caratteristiche peculiari.

Design of virtual aircraft multipurpose platform

This report elaborates on the master degree thesis developed by the candidate within the company Superjet International. The performed activity focuses on the study and design of VAMP (Virtual Aircraft Multipurpose Platform). VAMP is a new interactive platform, not necessarily limited to the Aeronautical sector, aimed to analyse technical failures, identify risk and recommend the most appropriate corrective actions for maintenance cost reduction, taking into account reliability, availability, maintainability and safety.

Characterization of thermoelectric commercial modules using a module test system

Il presente lavoro di tesi è stato svolto presso la DTU, Technical University of Denmark, nel Department of Energy Conversion and Storage, Riso Campus. Lo scopo del periodo di soggiorno estero è stato quello di caratterizzare appropriati moduli termoelettrici forniti da aziende del settore, utilizzando un opportuno apparato di caratterizzazione. Quest’ultimo è noto come “module test system” e, nello specifico, è stato fornito dalla PANCO GmbH, azienda anch’essa attiva nel campo delle tecnologie termoelettriche. Partendo da uno studio teorico dei fenomeni fisici interessati (effetto Seebeck per la produzione di potenza termoelettrica), si è cercato in seguito di analizzare le principali caratteristiche, ed elementi, del “module test system”. Successivamente a questa prima fase di analisi, sono stati condotti esperimenti che, con l’aiuto di modelli computazionali implementati attraverso il software Comsol Multiphysics, hanno permesso di studiare l’affidabilità del sistema di caratterizzazione. Infine, una volta acquisite le basi necessarie ad una corretta comprensione dei fenomeni fisici e delle caratteristiche relative alla strumentazione, sono stati analizzati moduli termoelettrici di tipo commerciale. In particolare, sono stati estrapolati dati quali correnti, tensioni, gradienti di temperatura, che hanno permesso di ricavare flussi termici, efficienze, e potenze che caratterizzano il modulo in questione durante le condizioni di funzionamento. I risultati ottenuti sono stati successivamente comparati con dati forniti dal produttore, presenti sul catalogo.

Uso di strumenti web per la reingegnerizzazione platform independent di applicazioni multipiattaforma.

La tesi parla del processo di modernizzazione di un software aziendale verso tecnologie web. Il trattato prosegue poi con lo studio di automatizzazione del processo, tramite strumenti di descrizione grammatiche (e DSL) come Xtext.

"Offshore tower or platform foundations: numerical analysis of a laterally loaded single pile or pile group in soft clay and analysis of actions on a jacket structure"

Laterally loaded piles are a typical situation for a large number of cases in which deep foundations are used. Dissertation herein reported, is a focus upon the numerical simulation of laterally loaded piles. In the first chapter the best model settings are largely discussed, so a clear idea about the effects of interface adoption, model dimension, refinement cluster and mesh coarseness is reached. At a second stage, there are three distinct parametric analyses, in which the model response sensibility is studied for variation of interface reduction factor, Eps50 and tensile cut-off. In addition, the adoption of an advanced soil model is analysed (NGI-ADP). This was done in order to use the complex behaviour (different undrained shear strengths are involved) that governs the resisting process of clay under short time static loads. Once set a definitive model, a series of analyses has been carried out with the objective of defining the resistance-deflection (P-y) curves for Plaxis3D (2013) data. Major results of a large number of comparisons made with curves from API (America Petroleum Institute) recommendation are that the empirical curves have almost the same ultimate resistance but a bigger initial stiffness. In the second part of the thesis a simplified structural preliminary design of a jacket structure has been carried out to evaluate the environmental forces that act on it and on its piles foundation. Finally, pile lateral response is studied using the empirical curves.

Evolution of the structural and fracture design of the ISS payloads due to the new launchers, specifically applied to Biolab IEC-2 projects

The relatively young discipline of astronautics represents one of the scientifically most fascinating and technologically advanced achievements of our time. The human exploration in space does not offer only extraordinary research possibilities but also demands high requirements from man and technology. The space environment provides a lot of attractive experimental tools towards the understanding of fundamental mechanism in natural sciences. It has been shown that especially reduced gravity and elevated radiation, two distinctive factors in space, influence the behavior of biological systems significantly. For this reason one of the key objectives on board of an earth orbiting laboratory is the research in the field of life sciences, covering the broad range from botany, human physiology and crew health up to biotechnology. The Columbus Module is the only European low gravity platform that allows researchers to perform ambitious experiments in a continuous time frame up to several months. Biolab is part of the initial outfitting of the Columbus Laboratory; it is a multi-user facility supporting research in the field of biology, e.g. effect of microgravity and space radiation on cell cultures, micro-organisms, small plants and small invertebrates. The Biolab IEC are projects designed to work in the automatic part of Biolab. In this moment in the TO-53 department of Airbus Defence & Space (formerly Astrium) there are two experiments that are in phase C/D of the development and they are the subject of this thesis: CELLRAD and CYTOSKELETON. They will be launched in soft configuration, that means packed inside a block of foam that has the task to reduce the launch loads on the payload. Until 10 years ago the payloads which were launched in soft configuration were supposed to be structural safe by themselves and a specific structural analysis could be waived on them; with the opening of the launchers market to private companies (that are not under the direct control of the international space agencies), the requirements on the verifications of payloads are changed and they have become much more conservative. In 2012 a new random environment has been introduced due to the new Space-X launch specification that results to be particularly challenging for the soft launched payloads. The last ESA specification requires to perform structural analysis on the payload for combined loads (random vibration, quasi-steady acceleration and pressure). The aim of this thesis is to create FEM models able to reproduce the launch configuration and to verify that all the margins of safety are positive and to show how they change because of the new Space-X random environment. In case the results are negative, improved design solution are implemented. Based on the FEM result a study of the joins has been carried out and, when needed, a crack growth analysis has been performed.

Sviluppo cross-platform di applicazioni mobile: analisi dello stato dell'arte e sperimentazioni in titanium

Panoramica sullo stato dell’arte degli approcci di sviluppo di mobile app alternativi agli approcci nativi, e approfondimento ulteriore dell’analisi. Valutazione concreta del framework Titanium, il più interessante per architettura e offerta di componenti di UI nativi, realizzata mediante lo sviluppo di un'app e facendo quindi il confronto con lo sviluppo nativo.

Simulation of visible light communications in vehicular networks

The rapid development in the field of lighting and illumination allows low energy consumption and a rapid growth in the use, and development of solid-state sources. As the efficiency of these devices increases and their cost decreases there are predictions that they will become the dominant source for general illumination in the short term. The objective of this thesis is to study, through extensive simulations in realistic scenarios, the feasibility and exploitation of visible light communication (VLC) for vehicular ad hoc networks (VANETs) applications. A brief introduction will introduce the new scenario of smart cities in which visible light communication will become a fundamental enabling technology for the future communication systems. Specifically, this thesis focus on the acquisition of several, frequent, and small data packets from vehicles, exploited as sensors of the environment. The use of vehicles as sensors is a new paradigm to enable an efficient environment monitoring and an improved traffic management. In most cases, the sensed information must be collected at a remote control centre and one of the most challenging aspects is the uplink acquisition of data from vehicles. My thesis discusses the opportunity to take advantage of short range vehicle-to-vehicle (V2V) and vehicle-to-roadside (V2R) communications to offload the cellular networks. More specifically, it discusses the system design and assesses the obtainable cellular resource saving, by considering the impact of the percentage of vehicles equipped with short range communication devices, of the number of deployed road side units, and of the adopted routing protocol. When short range communications are concerned, WAVE/IEEE 802.11p is considered as standard for VANETs. Its use together with VLC will be considered in urban vehicular scenarios to let vehicles communicate without involving the cellular network. The study is conducted by simulation, considering both a simulation platform (SHINE, simulation platform for heterogeneous interworking networks) developed within the Wireless communication Laboratory (Wilab) of the University of Bologna and CNR, and network simulator (NS3). trying to realistically represent all the wireless network communication aspects. Specifically, simulation of vehicular system was performed and introduced in ns-3, creating a new module for the simulator. This module will help to study VLC applications in VANETs. Final observations would enhance and encourage potential research in the area and optimize performance of VLC systems applications in the future.

Development and implementation of a S/W platform to automatically receive and share satellite data

Relazione del lavoro di creazione e implementazione della piattaforma software che sviluppa l’archivio del progetto SATNET. I satelliti universitari hanno un tempo di vista della propria Stazione di Terra di pochi minuti al giorno: SATNET risponde all’esigenza di comunicare con un satellite universitario in orbita bassa per più dei pochi minuti al giorno che una singola Stazione di Terra permette. Questo avviene grazie a una rete di Stazioni di Terra Satellitari collegate da specifiche missioni comuni che mettono in condivisione dati ricevuti da uno o più satelliti, aumentando il rendimento dati/giorno di questi e permettendo una migliore fruizione delle Stazioni di Terra stesse. Il network sfrutta Internet come canale di connessione, e prevede la presenza di un archivio nel quale memorizzare i dati ricevuti, per poi renderne possibile la consultazione e il recupero. Oggetto di questo lavoro di tesi è stato lo sviluppo e l’implementazione di tale archivio: utilizzando un sito web dinamico, il software risponde a tutte le richieste evidenziate nel paragrafo precedente, permettendo a utenti autenticati di inserire dati e ad altri di poterne avere accesso. Il software è completo e funzionante ma non finito, in quanto manca la formulazione di alcune richieste; per esempio non è stato specificato il tipo di informazioni che è possibile caricare in upload, né il tipo di campi richiesti nel modulo di registrazione dei vari utenti. In questi casi sono stati inseriti campi generici, lasciando all’utente la possibilità di modificarli in seguito. Il software è stato dunque concepito come facilmente personalizzabile e modificabile anche da utenti inesperti grazie alla sola lettura della tesi, che rappresenta quindi una vera e propria guida per l’utilizzo, l’installazione, la personalizzazione e la manutenzione della piattaforma software. La tesi evidenzia gli obiettivi e le richieste, mostrando l’aspetto del sito web e le sue funzionalità, e spiega passo per passo il procedimento per la modifica dell’aspetto delle pagine e di alcuni parametri di configurazione. Inoltre, qualora siano necessarie modifiche sostanziali al progetto, introduce i vari linguaggi di programmazione necessari allo sviluppo e alla programmazione web e aiuta l’utente nella comprensione della struttura del software. Si conclude con alcuni suggerimenti su eventuali modifiche, attuabili solo a seguito di un lavoro di definizione degli obiettivi e delle specifiche richieste. In futuro ci si aspetta l’implementazione e la personalizzazione del software, nonché l’integrazione dell’archivio all’interno del progetto SATNET, con l’obiettivo di migliorare e favorire la diffusione e la condivisione di progetti comuni tra diverse Università Europee ed Extra-Europee.

Integration of a simulation platform for electrical mobility within the arrowhead interoperability framework

This dissertation document deals with the development of a project, over a span of more than two years, carried out within the scope of the Arrowhead Framework and which bears my personal contribution in several sections. The final part of the project took place during a visiting period at the university of Luleå. The Arrowhead Project is an European project, belonging to the ARTEMIS association, which aims to foster new technologies and unify the access to them into an unique framework. Such technologies include the Internet of Things phe- nomenon, Smart Houses, Electrical Mobility and renewable energy production. An application is considered compliant with such framework when it respects the Service Oriented Architecture paradigm and it is able to interact with a set of defined components called Arrowhead Core Services. My personal contribution to this project is given by the development of several user-friendly API, published in the project's main repository, and the integration of a legacy system within the Arrowhead Framework. The implementation of this legacy system was initiated by me in 2012 and, after many improvements carried out by several developers in UniBO, it has been again significantly modified this year in order to achieve compatibility. The system consists of a simulation of an urban scenario where a certain amount of electrical vehicles are traveling along their specified routes. The vehicles are con-suming their battery and, thus, need to recharge at the charging stations. The electrical vehicles need to use a reservation mechanism to be able to recharge and avoid waiting lines, due to the long recharge process. The integration with the above mentioned framework consists in the publication of the services that the system provides to the end users through the instantiation of several Arrowhead Service Producers, together with a demo Arrowhead- compliant client application able to consume such services.