Random Access Procedures in 5G IoT via NTN: System level performances

The Internet of Things (IoT) is a critical pillar in the digital transformation because it enables interaction with the physical world through remote sensing and actuation. Owing to the advancements in wireless technology, we now have the opportunity of using their features to the best of our abilities and improve over the current situation. Indeed, the Internet of Things market is expanding at an exponential rate, with devices such as alarms and detectors, smart metres, trackers, and wearables being used on a global scale for automotive and agriculture, environment monitoring, infrastructure surveillance and management, healthcare, energy and utilities, logistics, good tracking, and so on. The Third Generation Partnership Project (3GPP) acknowledged the importance of IoT by introducing new features to support it. In particular, in Rel.13, the 3GPP introduced the so-called IoT to support Low Power Wide Area Networks (LPWAN).As these devices will be distributed in areas where terrestrial networks are not feasible or commercially viable, satellite networks will play a complementary role due to their ability to provide global connectivity via their large footprint size and short service deployment time. In this context, the goal of this thesis is to investigate the viability of integrating IoT technology with satellite communication (SatCom) systems, with a focus on the Random Access(RA) Procedure. Indeed, the RA is the most critical procedure because it allows the UE to achieve uplink synchronisation, obtain the permanent ID, and obtain uplink transmission resources. The goal of this thesis is to evaluate preamble detection in the SatCom environment.

Isolated electrical microgrids employing renewable energy resources:analysis of the electrification of remote communities in Peru.

This project points out a brief overview of several concepts, as Renewable Energy Resources, Distributed Energy Resources, Distributed Generation, and describes the general architecture of an electrical microgrid, isolated or connected to the Medium Voltage Network. Moreover, the project focuses on a project carried out by GRECDH Department in collaboration with CITCEA Department, both belonging to Universitat Politécnica de Catalunya: it concerns isolated microgrids employing renewable energy resources in two communities in northern Peru. Several solutions found using optimization software regarding different generation systems (wind and photovoltaic) and different energy demand scenarios are commented and analyzed from an electrical point of view. Furthermore, there are some proposals to improve microgrid performances, in particular to increase voltage values for each load connected to the microgrid. The extra costs required by the proposed solutions are calculated and their effect on the total microgrid cost are taken into account; finally there are some considerations about the impact the project has on population and on people's daily life.

Metocean Climate Impact on the Fatigue Assessment of a Jacket-Type Offshore Platform

When the offshore oil and gas supplies exhaust, most offshore platforms are decommissioned and removed. The purpose of this paper is to evaluate the fatigue damage that will occur during the service life of a jacket-type offshore platform using different fatigue approaches in particular locations. The locations considered for this metocean climate impact study were Norway (North Sea), Portugal (Atlantic Ocean - Leixões) and Italy (Adriatic Sea). A finite element model was created by the means of Sesam and two different fatigue analysis, deterministic and spectral, were applied. For the fatigue assessment, an appropriate description of the site-specific wave environment, during the jacket platform service life, must be accomplished. This description is usually provided by a wave scatter diagram. Wave scatter diagrams usually represent the long-term wave environment during a (typical) year and are based on several years of site-specific data to ensure that they adequately represent the wave environment at the location of the structure. In this thesis, the comparison between these fatigue approaches will serve as a pilot study for planned reliability analysis in decommissioned offshore platforms in order to maximize the reuse of these platforms for future wind generation systems.

OFDM-based schemes for next generation wireless systems

The purpose of this study is to investigate two candidate waveforms for next generation wireless systems, filtered Orthogonal Frequency Division Multiplexing (f-OFDM) and Unified Filtered Multi-Carrier (UFMC). The evaluation is done based on the power spectral density analysis of the signal and performance measurements in synchronous and asynchronous transmission. In f-OFDM we implement a soft truncated filter with length 1/3 of OFDM symbol. In UFMC we use the Dolph-Chebyshev filter, limited to the length of zero padding (ZP). The simulation results demonstrates that both waveforms have a better spectral behaviour compared with conventional OFDM. However, the induced inter-symbol interference (ISI) caused by the filter in f-OFDM, and the inter-carrier interference (ICI) induced in UFMC due to cyclic prefix (CP) reduction , should be kept under control. In addition, in a synchronous transmission case with ideal parameters, f-OFDM and UFMC appear to have similar performance with OFDM. When carrier frequency offset (CFO) is imposed in the transmission, UFMC outperforms OFDM and f-OFDM.

Towards model driven software development for Arduino platforms: a DSL and automatic code generation

La tesi ha lo scopo di esplorare la produzione di sistemi software per Embedded Systems mediante l'utilizzo di tecniche relative al mondo del Model Driven Software Development. La fase più importante dello sviluppo sarà la definizione di un Meta-Modello che caratterizza i concetti fondamentali relativi agli embedded systems. Tale modello cercherà di astrarre dalla particolare piattaforma utilizzata ed individuare quali astrazioni caratterizzano il mondo degli embedded systems in generale. Tale meta-modello sarà quindi di tipo platform-independent. Per la generazione automatica di codice è stata adottata una piattaforma di riferimento, cioè Arduino. Arduino è un sistema embedded che si sta sempre più affermando perché coniuga un buon livello di performance ed un prezzo relativamente basso. Tale piattaforma permette lo sviluppo di sistemi special purpose che utilizzano sensori ed attuatori di vario genere, facilmente connessi ai pin messi a disposizione. Il meta-modello definito è un'istanza del meta-metamodello MOF, definito formalmente dall'organizzazione OMG. Questo permette allo sviluppatore di pensare ad un sistema sotto forma di modello, istanza del meta-modello definito. Un meta-modello può essere considerato anche come la sintassi astratta di un linguaggio, quindi può essere definito da un insieme di regole EBNF. La tecnologia utilizzata per la definizione del meta-modello è stata Xtext: un framework che permette la scrittura di regole EBNF e che genera automaticamente il modello Ecore associato al meta-modello definito. Ecore è l'implementazione di EMOF in ambiente Eclipse. Xtext genera inoltre dei plugin che permettono di avere un editor guidato dalla sintassi, definita nel meta-modello. La generazione automatica di codice è stata realizzata usando il linguaggio Xtend2. Tale linguaggio permette di esplorare l'Abstract Syntax Tree generato dalla traduzione del modello in Ecore e di generare tutti i file di codice necessari. Il codice generato fornisce praticamente tutta la schematic part dell'applicazione, mentre lascia all'application designer lo sviluppo della business logic. Dopo la definizione del meta-modello di un sistema embedded, il livello di astrazione è stato spostato più in alto, andando verso la definizione della parte di meta-modello relativa all'interazione di un sistema embedded con altri sistemi. Ci si è quindi spostati verso un ottica di Sistema, inteso come insieme di sistemi concentrati che interagiscono. Tale difinizione viene fatta dal punto di vista del sistema concentrato di cui si sta definendo il modello. Nella tesi viene inoltre introdotto un caso di studio che, anche se abbastanza semplice, fornisce un esempio ed un tutorial allo sviluppo di applicazioni mediante l'uso del meta-modello. Ci permette inoltre di notare come il compito dell'application designer diventi piuttosto semplice ed immediato, sempre se basato su una buona analisi del problema. I risultati ottenuti sono stati di buona qualità ed il meta-modello viene tradotto in codice che funziona correttamente.

A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

5g mobile communications systems

Un sistema mobile di comunicazione è un sistema di telecomunicazioni in cui è possibile mantenere la connessione o legame tra due o più utenti, anche nelle situazioni di mobilità totale o parziale degli stessi utenti. I sistemi radiomobili si stanno evolvendo dalla creazione del 1G (prima generazione) al 4G (quarta generazione). I telefoni di ogni generazione si differenziano in quattro aspetti principali : accesso radio, velocità di trasmissione dati, larghezza di banda e sistemi di commutazione. In questa tesi si affronta il tema dei sistemi 5G , negli ambienti terrestri e satellitari , in quanto sono l'ultima evoluzione dei sistemi mobili . Si introduce il passaggio dalla prima alla connessione di quarta generazione , al fine di capire perché 5G sta per cambiare la nostra vita . Quello che mi colpisce è il sito italiano www.Repubblica.it che dice : " con la nuova generazione 5 possiamo affidare le intere porzioni nette di vita". La tecnologia cellulare , infatti , ha cambiato radicalmente la nostra società e il nostro modo di comunicare . In primo luogo è cambiata la telefonia vocale , per poi trasferirsi all' accesso dati , applicazioni e servizi. Tuttavia , Internet non è stato ancora pienamente sfruttato dai sistemi cellulari. Con l'avvento del 5G avremo l'opportunità di scavalcare le capacità attuali di Internet . Il sistema di comunicazione di quinta generazione è visto come la rete wireless reale , in grado di supportare applicazioni web wireless a livello mondiale ( wwww ). Ci sono due punti di vista dei sistemi 5G : evolutivo e rivoluzionario. Dal punto di vista evolutivo, i sistemi 5G saranno in grado di supportare wwww permettendo una rete altamente flessibile come un Adhoc rete wireless dinamica ( DAWN ) . In questa visione tecnologie avanzate, tra cui antenna intelligente e modulazione flessibile , sono le chiavi per ottimizzare le reti wireless ad hoc. Dal punto di vista rivoluzionario, i sistemi 5G dovrebbe essere una tecnologia intelligente in grado di interconnettere tutto il mondo senza limiti . Un esempio di applicazione potrebbe essere un robot wireless con intelligenza artificiale .

An integrated system for building and running reproducible research

Our generation of computational scientists is living in an exciting time: not only do we get to pioneer important algorithms and computations, we also get to set standards on how computational research should be conducted and published. From Euclid’s reasoning and Galileo’s experiments, it took hundreds of years for the theoretical and experimental branches of science to develop standards for publication and peer review. Computational science, rightly regarded as the third branch, can walk the same road much faster. The success and credibility of science are anchored in the willingness of scientists to expose their ideas and results to independent testing and replication by other scientists. This requires the complete and open exchange of data, procedures and materials. The idea of a “replication by other scientists” in reference to computations is more commonly known as “reproducible research”. In this context the journal “EAI Endorsed Transactions on Performance & Modeling, Simulation, Experimentation and Complex Systems” had the exciting and original idea to make the scientist able to submit simultaneously the article and the computation materials (software, data, etc..) which has been used to produce the contents of the article. The goal of this procedure is to allow the scientific community to verify the content of the paper, reproducing it in the platform independently from the OS chosen, confirm or invalidate it and especially allow its reuse to reproduce new results. This procedure is therefore not helpful if there is no minimum methodological support. In fact, the raw data sets and the software are difficult to exploit without the logic that guided their use or their production. This led us to think that in addition to the data sets and the software, an additional element must be provided: the workflow that relies all of them.

Analysis of Lead-Acid batteries with a third-order dynamical model

Electrical energy storage is a really important issue nowadays. As electricity is not easy to be directly stored, it can be stored in other forms and converted back to electricity when needed. As a consequence, storage technologies for electricity can be classified by the form of storage, and in particular we focus on electrochemical energy storage systems, better known as electrochemical batteries. Largely the more widespread batteries are the Lead-Acid ones, in the two main types known as flooded and valve-regulated. Batteries need to be present in many important applications such as in renewable energy systems and in motor vehicles. Consequently, in order to simulate these complex electrical systems, reliable battery models are needed. Although there exist some models developed by experts of chemistry, they are too complex and not expressed in terms of electrical networks. Thus, they are not convenient for a practical use by electrical engineers, who need to interface these models with other electrical systems models, usually described by means of electrical circuits. There are many techniques available in literature by which a battery can be modeled. Starting from the Thevenin based electrical model, it can be adapted to be more reliable for Lead-Acid battery type, with the addition of a parasitic reaction branch and a parallel network. The third-order formulation of this model can be chosen, being a trustworthy general-purpose model, characterized by a good ratio between accuracy and complexity. Considering the equivalent circuit network, all the useful equations describing the battery model are discussed, and then implemented one by one in Matlab/Simulink. The model has been finally validated, and then used to simulate the battery behaviour in different typical conditions.