Stability analysis of linear thin shells

Shell structure is widely used in engineering area. The purpose of this dissertation is to show the behavior of a thin shell under external load, especially for long cylindrical shell under compressive load, I analyzed not only for linear elastic problem and also for buckling problem, and by using finite element analysis it shows that the imperfection of a cylinder could affect the critical load which means the buckling capability of this cylinder. For linear elastic problem, I compared the theoretical results with the results got from Straus7 and Abaqus, and the results are really close. For the buckling problem I did the same: compared the theoretical and Abaqus results, the error is less than 1%, but in reality, it’s not possible to reach the theoretical buckling capability due to the imperfection of the cylinder, so I put different imperfection for the cylinder in Abaqus, and found out that with the increasing of the percentage of imperfection, the buckling capability decreases, for example 10% imperfection could decrease 40% of the buckling capability, and the outcome meet the buckling behavior in reality.

Gusci temporanei e ricomponibili: Utilizzo di un sistema multi-agente per la generazione di un sistema costruttivo a tasselli planari per superfici a doppia curvatura

Lo scopo della ricerca è quello di sviluppare un metodo di design che integri gli apporti delle diverse discipline di architettura, ingegneria e fabbricazione all’interno del progetto, utilizzando come caso di studio l’uso di una tettonica ad elementi planari in legno per la costruzione di superfici a guscio da utilizzare come padiglioni temporanei. La maniera in cui ci si propone di raggiungere tale scopo è tramite l’utilizzo di un agent based system che funge da mediatore tra i vari obbiettivi che si vogliono considerare, in questo caso tra parametri estetici, legati alla geometria scelta, e di fabbricazione. Si sceglie di applicare questo sistema allo studio di una struttura a guscio, che grazie alla sua naturale rigidezza integra forma e capacità strutturale, tramite una tassellazione planare della superficie stessa. Il sistema studiato si basa sull’algoritmo di circle relaxation, che viene integrato tramite dei comportamenti che tengano conto della curvatura della superficie in questione e altri comportamenti scelti appositamente per agevolare il processo di tassellazione tramite tangent plane intersection. La scelta di studiare elementi planari è finalizzata ad una maggiore facilità di fabbricazione ed assemblaggio prevedendo l’uso di macchine a controllo numerico per la fabbricazione e un assemblaggio interamente a secco e che non necessita di impalcature . Il risultato proposto è quello quindi di un padiglione costituito da elementi planari ricomponibili in legno, con particolare attenzione alla facilità e velocità di montaggio degli stessi, utile per possibili strutture temporanee e/o di emergenza.

Ingegnerizzazione e design di nanoparticelle core-shell di magnetite/silice

In the past decade the study of superparamagnetic nanoparticles has been intensively developed for many biomedical applications such as magnetically assisted drug delivery, MRI contrast agents, cells separation and hyperthermia therapy. All of these applications require nanoparticles with high magnetization, equipped also with a suitable surface coating which has to be non-toxic and biocompatible. In this master thesis, the silica coating of commercially available magnetic nanoparticles was investigated. Silica is a versatile material with many intrinsic features, such as hydrophilicity, low toxicity, proper design and derivatization yields particularly stable colloids even in physiological conditions. The coating process was applied to commercial magnetite particles dispersed in an aqueous solution. The formation of silica coated magnetite nanoparticles was performed following two main strategies: the Stöber process, in which the silica coating of the nanoparticle was directly formed by hydrolysis and condensation of suitable precursor in water-alcoholic mixtures; and the reverse microemulsions method in which inverse micelles were used to confine the hydrolysis and condensation reactions that bring to the nanoparticles formation. Between these two methods, the reverse microemulsions one resulted the most versatile and reliable because of the high control level upon monodispersity, silica shell thickness and overall particle size. Moving from low to high concentration, within the microemulsion region a gradual shift from larger particles to smaller one was detected. By increasing the amount of silica precursor the silica shell can also be tuned. Fluorescent dyes have also been incorporated within the silica shell by linking with the silica matrix. The structure of studied nanoparticles was investigated by using transmission electron microscope (TEM) and dynamic light scattering (DLS). These techniques have been used to monitor the syntetic procedures and for the final characterization of silica coated and silica dye doped nanoparticles. Finally, field dependent magnetization measurements showed the magnetic properties of core-shell nanoparticles were preserved. Due to a very well defined structure that combines magnetic and luminescent properties together with the possibility of further functionalization, these multifunctional nanoparticles are potentially useful platforms in biomedical fields such as labeling and imaging.