Flat roofs renovation: a life cycle approach for environmental impact assessment and economic effectiveness

The high energy consumption caused by the building sector and the continuous growth and ageing of the existing housing stock show the importance of housing renovation to improve the quality of the environment. This research compares the environmental performance of flat roof systems (insulation, roofing membrane and covering layer) using Life Cycle Assessment (LCA). The aim is to give indications on how to improve the environmental performance of housing. This research uses a reference building located in the Netherlands and considers environmental impacts related to materials, energy consumption for heating and maintenance activities. It indicates impact scores for each material taking into account interconnections between the layers and between the different parts of the life cycle. It compares the environmental and economic performances of PV panels and of different materials and thermal resistance values for the insulation. These comparisons show that PV panels are convenient from an environmental and economic point of view. The same is true for the insulation layer, especially for materials as PIR (polyisocyanurate) and EPS (expanded polystyrene). It shows that energy consumption for heating causes a larger share of impact scores than production of the materials and maintenance activities. The insulation also causes larger impact scores comparing to roofing membrane and covering layer. The results show which materials are preferable for flat roof renovation and what causes the largest shares of impact. This gives indication to the roofers and to other stakeholders about how to reduce the environmental impact of the existing housing stock.

The use of remote sensing imagery for monitoring recovery in the aftermath of a natural disaster: the Hurricane Katrina Case

Although Recovery is often defined as the less studied and documented phase of the Emergency Management Cycle, a wide literature is available for describing characteristics and sub-phases of this process. Previous works do not allow to gain an overall perspective because of a lack of systematic consistent monitoring of recovery utilizing advanced technologies such as remote sensing and GIS technologies. Taking into consideration the key role of Remote Sensing in Response and Damage Assessment, this thesis is aimed to verify the appropriateness of such advanced monitoring techniques to detect recovery advancements over time, with close attention to the main characteristics of the study event: Hurricane Katrina storm surge. Based on multi-source, multi-sensor and multi-temporal data, the post-Katrina recovery was analysed using both a qualitative and a quantitative approach. The first phase was dedicated to the investigation of the relation between urban types, damage and recovery state, referring to geographical and technological parameters. Damage and recovery scales were proposed to review critical observations on remarkable surge- induced effects on various typologies of structures, analyzed at a per-building level. This wide-ranging investigation allowed a new understanding of the distinctive features of the recovery process. A quantitative analysis was employed to develop methodological procedures suited to recognize and monitor distribution, timing and characteristics of recovery activities in the study area. Promising results, gained by applying supervised classification algorithms to detect localization and distribution of blue tarp, have proved that this methodology may help the analyst in the detection and monitoring of recovery activities in areas that have been affected by medium damage. The study found that Mahalanobis Distance was the classifier which provided the most accurate results, in localising blue roofs with 93.7% of blue roof classified correctly and a producer accuracy of 70%. It was seen to be the classifier least sensitive to spectral signature alteration. The application of the dissimilarity textural classification to satellite imagery has demonstrated the suitability of this technique for the detection of debris distribution and for the monitoring of demolition and reconstruction activities in the study area. Linking these geographically extensive techniques with expert per-building interpretation of advanced-technology ground surveys provides a multi-faceted view of the physical recovery process. Remote sensing and GIS technologies combined to advanced ground survey approach provides extremely valuable capability in Recovery activities monitoring and may constitute a technical basis to lead aid organization and local government in the Recovery management.

Sistemi per la climatizzazione mediante pompe di calore geotermiche e pali energetici

We need a large amount of energy to make our homes pleasantly warm in winter and cool in summer. If we also consider the energy losses that occur through roofs, perimeter walls and windows, it would be more appropriate to speak of waste than consumption. The solution would be to build passive houses, i.e. buildings more efficient and environmentally friendly, able to ensure a drastic reduction of electricity and heating bills. Recently, the increase of public awareness about global warming and environmental pollution problems have “finally” opened wide possibility in the field of sustainable construction by encouraging new renewable methods for heating and cooling space. Shallow geothermal allows to exploit the renewable heat reservoir, present in the soil at depths between 15 and 20 m, for air-conditioning of buildings, using a ground source heat pump. This thesis focuses on the design of an air-conditioning system with geothermal heat pump coupled to energy piles, i.e. piles with internal heat exchangers, for a typical Italian-family building, on the basis of a geological-technical report about a plot of Bologna’s plain provided by Geo-Net s.r.l. The study has involved a preliminary static sizing of the piles in order to calculate their length and number, then the project was completed making the energy sizing, where it has been verified if the building energy needs were met with the static solution obtained. Finally the attention was focused on the technical and economical validity compared to a traditional system (cost-benefit analysis) and on the problem of the uncertainty data design and their effects on the operating and initial costs of the system (sensitivity analysis). To evaluate the performance of the thermal system and the potential use of the piles was also used the PILESIM2 software, designed by Dr. Pahud of the SUPSI’s school.

Mitigazione dell'isola di calore attraverso i tetti verdi: il caso di studio di Via Terracini a Bologna

Con il termine “tetti verdi” si intendono vere e proprie coperture vegetate, che fungono da valida alterativa alle tipologie convenzionali a coppi oppure in guaina impermeabilizzante. Per quanto questi possano essere considerati una soluzione moderna relativa alle diverse Best Management Practices (BMP), in realtà sono stati realizzati e sfruttati fin dall'antichità. Dagli anni Settanta ad oggi hanno preso sempre più piede in Europa e negli altri continenti a causa dei molteplici benefici che li accompagnano a livello ambientale. All'interno di questo studio ci si pone l‟obiettivo di valutarne i vantaggi, principalmente a livello energetico ed idraulico, riscontrati in letteratura, direttamente sul campo, grazie al sito di studio presso la sede di Ingegneria di via Terracini, Bologna. Sulle coperture del LAGIRN (Laboratorio di Geoingegneria e Risorse Naturali), infatti, nell‟estate 2013 sono stati realizzati due tetti verdi (uno a Sedum, che sarà indicato con la sigla GR, e uno con piante autoctone, identificato con la sigla NA). Tramite il confronto tra le temperature registrate grazie a diversi tipi di strumentazione, è stato possibile quantificare i comportamenti delle coperture su scala annuale, non solo l‟una rispetto l‟altra, ma anche in rapporto a una porzione di tetto lasciata a guaina bituminosa (indicato con la sigla RR). Considerando il ruolo della vegetazione come strumento per la mitigazione del fenomeno d‟isola di calore urbana, infine, con l‟ausilio del software CFD denominato ENVI-met si è modellata l‟intera area del Lazzaretto e si sono simulati tre diversi scenari: 1) Lo stato attuale 2) Una situazione ipotetica con tutte coperture a Sedum 3) Una situazione ipotetica con tutte coperture con specie autoctone per la giornata estiva più calda e per un comune giorno di Ottobre, a seguito di una minuziosa calibrazione. Il confronto tra la situazione reale e quelle supposte dimostra la validità dei green roofs nella lotta al riscaldamento delle grandi città.