Oxodiperoxomolybdenum catalyzed olefin epoxidation: the role of Ionic Liquids

Ionic Liquids (ILs) constituted by organic cations and inorganic anions are particular salts with a melting point below 100°C. Their physical properties such as melting point and solubility can be tuned by altering the combination of their anions and cations. In the last years the interest in ILs has been centered mostly on their possible use as “green” alternatives to the traditional volatile organic solvents (VOCs) thanks to their low vapour pressure and the efficient ability in catalyst immobilization. In this regard, the subject of the present thesis is the study of the oxodiperoxomolybdenum catalyzed epoxidation of olefins in ILs media with hydrogen peroxide as the oxidant. In particular N-functionalized imidazolium salts, such as 1-(2-t-Butoxycarbonylamino-ethyl)-3-methylimidazolium (1), were synthesized with different counterions [I]-, [PF6]-, [NO3]-, [NTf2]- and [ClO4]– and tested as reaction solvents. The counterion exchange with [Cl]-, [NTf2]- and [NO3]- was also performed in unfuctionalized imidazolium salts such as 3-butyl-1-methylimidazol-3-ium (3). All the prepared ILs were tested in catalytic epoxidation of olefins exploiting oxodiperoxomolybdenum complexes [MoO(O2)2(C4H6N2)2] (4) and [MoO(O2)2(C5H8N2)2] (5) as catalysts. The IL 3[NTf2] and the catalysts 5 give rise to the best results leading to the selective formation of the epoxide of cis-cyclooctene avoiding hydrolysis side reaction. A preliminary study on the synthesis of novel NHC oxodiperoxomolybdenum complexes starting from imidazolium salts was also developed.

Double-stimulus sensitive (temperature and pH) self-assemblable polymers

The rheological properties of block co-polymers in water solution at different pH have been investigated. The block copolymers are based on different architectures containing poly(ethylene glycol), poly(propylene glycol) and different blocks of polymer that change their hydrophobic/hydrophilic behavior as a function of pH. The polymer chains of the starting material were extended at their functional ends with the pH-sensitive units using ATRP; this mechanism of controlled radical polymerization was chosen because of the need to minimize polydispersity and avoid transfer reactions possibly leading to homopolymeric inpurities. The starting material were modified in order to use them as macroinitiator for ATRP. The kinetic of each ATRP reaction has been investigated, in order to be able to synthesize polymers with different degree of polymerization, stopping the reaction when the desired polymers chain length has been reached. We will use polymer chains with different basicity and degree of polymerization to link any possible effect of their presence to the conditions under which they become hydrophobic. It has been shown that the rate of polymerization changes changing the type of macroinitiator and the type of monomer synthesized. The slowest rate of polymerization is the one with the most hindered monomer synthesized using the macroinitiator with the highest molecular weight. The water solubility of the synthesized polymers changes depending on the pH of the solution and on the structure of the polymers. It has been shown using 1H-NMR that some of the synthesized polymers are capable to self-aggregation in water solution. The self-aggregation and the type of aggregation is influenced from the structure of the polymer and from the pH of the solution. Changing the structure of the polymers and the pH it is possible to obtain different type of aggregates in solution. This aggregates differ for the volume occupied from them, and for their hardness. Rheological measurements have been demonstrated that the synthesized polymers are capable to form gel phases. The gelation temperature changes changing the structure of the aggregates in solution and it is possible to correlate the changing in the gelation temperature with the changing in the structure of the polymer.

Sintesi e caratterizzazione di prepolimeri per resine epossidiche derivanti da fonti rinnovabili e naturali attraverso un processo a basso impatto ambientale

La sostituzione di materie prime provenienti da risorse fossili con biomasse rinnovabili, utilizzando un processo a basso impatto ambientale, è una delle più importanti sfide della "Green Chemistry". Allo stesso tempo, la sintesi di resine epossidiche fornisce la chiave per la realizzazione di materiali ad alto valore aggiunto. Tuttavia, ad oggi, il 90% della produzione di resine epossidiche è basato sull'uso di bisfenolo A, che ha effetti di xenoestrogeno, ed epicloridrina, tossica e cancerogena. Su queste basi, è stata individuata una strategia sintetica per la sintesi di prepolimeri innovativi per resine epossidiche, che utilizza come substrato di reazione diidrossibenzeni di origine naturale ed evita l'uso di epicloridrina e altri reagenti tossici o pericolosi. La suddetta strategia sintetica è basata sulla sequenza: allilazione dei diidrossibenzeni - epossidazione dei doppi legami ottenuti. In questa procedura non vengono utilizzati drastiche condizioni di reazione e il solvente è acqua, con una catalisi di trasferimento di fase o, in aggiunte di acetonitrile, in un sistema bifasico. La resa complessiva dei due “step” dipende dalla posizione dei due ossidrili nei diidrossibenzeni. Il reagente che porta la resa massima è l’idrochinone (1,4 diidrossibenzene), che, come riportato in letteratura, permette la formazione di resine epossidiche con proprietà simili alle resine di epicloridrina e bisfenolo A. The substitution of raw materials from fossil fuels with renewable biomass using a low environmental impact process is one of the greatest challenges of the "Green Chemistry". At the same time, the synthesis of epoxy resins provides the key to the realization of high added value materials. However, 90% of the production of epoxy resins is based on the use of bisphenol A, a xenoestrogen, and epichlorohydrin, that is toxic and carcinogenic. On these bases, a synthetic strategy for the synthesis of innovative prepolymers of epoxy resins, that uses dihydroxybenzenes of natural origin as reaction substrates and avoids the use of epichlorohydrin and other toxic or dangerous reagents has been identified. The above synthetic strategy is based on the sequence: allylation of dihydroxybenzenes - epoxidation of the double bonds obtained. In this procedure, drastic reaction conditions are dismissed and the solvent used is water with a phase transfer catalysis or, in addition, acetonitrile in a biphasic system. The overall yield of the two steps depends on the position of the two hydroxyls of the dihydroxybenzenes. The reagent that leads to the highest yield is hydroquinone (1,4 dihydroxybenzene), which, as reported in literature, allows the formation of epoxy resins with similar properties to the resins from bisphenol A and epichlorohydrin.

Organic/inorganic polyoxometalate-based hybrids for oxidation catalysis and energy conversion

This thesis work has been carried out during the Erasmus exchange period at the “Université Paris 6 – Pierre et Marie Curie”, in the “Edifices PolyMétalliques – EPOM” team, leaded by Prof. Anna Proust, belonging to the “Institut Parisien de Chimie Moléculaire”, under the supervision of Dr. Guillaume Izzet and Dr. Geoffroy Guillemot. The redox properties of functionalized Keggin and Dawson POMs have been exploited in photochemical, catalytic and reactivity tests. For the photochemical purposes, the selected POMs have been functionalized with different photoactive FGs, and the resulting products have been characterized by CV analyses, luminescence tests and UV-Vis analyses. In future, these materials will be tested for hydrogen photoproduction and polymerization of photoactive films. For the catalytic purposes, POMs have been firstly functionalized with silanol moieties, to obtain original coordination sites, and then post-functionalized with TMs such as V, Ti and Zr in their highest oxidation states. In this way, the catalytic properties of TMs were coupled to the redox properties of POM frameworks. The redox behavior of some of these hybrids has been studied by spectro-electrochemical and EPR methods. Catalytic epoxidation tests have been carried out on allylic alcohols and n-olefins, employing different catalysts and variable amounts of them. The performances of POM-V hybrids have been compared to those of VO(iPrO)3. Finally, reactivity of POM-VIII hybrids has been studied, using styrene oxide and ethyl-2-diazoacetate as substrates. All the obtained products have been analyzed via NMR techniques. Cyclovoltammetric analyses have been carried out in order to determine the redox behavior of selected hybrids.

Preparazione di una resina epossidica bio-based e studio delle relative proprietà

Epoxy resins are very diffused materials due to their high added value deriving from high mechanical proprieties and thermal resistance; for this reason they are widely used both as metallic coatings in aerospace and in food packaging. However, their preparation uses dangerous reagents like bisphenol A and epichlorohydrin respectively classified as suspected of causing damage to fertility and to be carcinogen. Therefore, to satisfy the ever-growing attention to environmental problems and human safeness, we are considering alternative “green” processes through the use of reagents obtained as by-products from other processes and mild experimental conditions, and also economically sustainable and attractive for industries. Following previous results, we carried out the reaction leading to the formation of diphenolic acid (DPA), its allylation and the following epoxidation of the double bonds, all in aqueous solvent. In a second step the obtained product were cross-linked at high temperature with and without the use of hardeners. Then, on the obtained resin, some tests were performed like release in aqueous solution, scratch test and DSC analysis.