Analisi dello spettro di massa invariante j/psi pi+ pi- in collisioni p-p a sqrt(s) = 8 tev con il rivelatore cms

In questo lavoro di tesi è stato studiato lo spettro di massa invariante del sistema J/psi pi+ pi-, m(J/psi pi+ pi-), in collisioni protone-protone a LHC, con energia nel centro di massa sqrt(s)) pari a 8 TeV, alla ricerca di nuovi stati adronici. Lo studio è stato effettuato su un campione di dati raccolti da CMS in tutto il 2012, corrispondente ad una luminosità integrata di 18.6 fb-1. Lo spettro di massa invariante m(J/psi pi+ pi-), è stato ricostruito selezionando gli eventi J/psi->mu+ mu- associati a due tracce cariche di segno opposto, assunte essere pioni, provenienti da uno stesso vertice di interazione. Nonostante l'alta statistica a disposizione e l'ampia regione di massa invariante tra 3.6 e 6.0 GeV/c^2 osservata, sono state individuate solo risonanze già note: la risonanza psi(2S) del charmonio, lo stato X(3872) ed una struttura più complessa nella regione attorno a 5 GeV/c^2, che è caratteristica della massa dei mesoni contenenti il quark beauty (mesoni B). Al fine di identificare la natura di tale struttura, è stato necessario ottenere un campione di eventi arricchito in adroni B. È stata effettuata una selezione basata sull'elevata lunghezza di decadimento, che riflette la caratteristica degli adroni B di avere una vita media relativamente lunga (ordine dei picosecondi) rispetto ad altri adroni. Dal campione così ripulito, è stato possibile distinguere tre sottostrutture nello spettro di massa invariante in esame: una a 5.36 GeV/c^2, identificata come i decadimenti B^0_s-> J/psi pi+ pi-, un'altra a 5.28 GeV/c^2 come i candidati B^0-> J/psi pi+ pi- e un'ultima allargata tra 5.1 e 5.2 GeV/c^2 data da effetti di riflessione degli scambi tra pioni e kaoni. Quest'ultima struttura è stata identificata come totalmente costituita di una combinazione di eventi B^0-> J/psi K+ pi- e B^0_s-> J/psi K+ K-.

Study of the performances of the H->ZZ*->4l analysis with the CMS phase-II upgrade

The performances of the H → ZZ* → 4l analysis are studied in the context of the High Luminosity upgrade of the LHC collider, with the CMS detector. The high luminosity (up to L = 5 × 10^34 cm−2s−1) of the accelerator poses very challenging experimental con- ditions. In particular, the number of overlapping events per bunch crossing will increase to 140. To cope with this difficult environment, the CMS detector will be upgraded in two stages: Phase-I and Phase-II. The tools used in the analysis are the CMS Full Simulation and the fast parametrized Delphes simulation. A validation of Delphes with respect to the Full Simulation is performed, using reference Phase-I detector samples. Delphes is then used to simulate the Phase-II detector response. The Phase-II configuration is compared with the Phase-I detector and the same Phase-I detector affected by aging processes, both modeled with the Full Simulation framework. Conclusions on these three scenarios are derived: the degradation in performances observed with the “aged” scenario shows that a major upgrade of the detector is mandatory. The specific upgrade configuration studied allows to keep the same performances as in Phase-I and, in the case of the four-muons channel, even to exceed them.

Outdoor production of Isochrysis galbana (T-iso) in industrial scale photobioreactors and modelling of its photosynthesis and respiration rate

Isochrysis galbana is a widely-used strain in aquaculture in spite of its low productivity. To maximize the productivity of processes based on this microalgae strain, a model was developed considering the influence of irradiance, temperature, pH and dissolved oxygen concentration on the photosynthesis and respiration rate. Results demonstrate that this strain tolerates temperatures up to 35ºC but it is highly sensitive to irradiances higher than 500 µE·m-2·s-1 and dissolved oxygen concentrations higher than 11 mg·l-1. With the researcher group of the “Universidad de Almeria”, the developed model was validated using data from an industrial-scale outdoor tubular photobioreactor demonstrating that inadequate temperature and dissolved oxygen concentrations reduce productivity to half that which is maximal, according to light availability under real outdoor conditions. The developed model is a useful tool for managing working processes, especially in the development of new processes based on this strain and to take decisions regarding optimal control strategies. Also the outdoor production of Isochrysis galbana T-iso in industrial size tubular photobioreactors (3.0 m3) has been studied. Experiments were performed modifying the dilution rate and evaluating the biomass productivity and quality, in addition to the overall performance of the system. Results confirmed that T-iso can be produced outdoor at commercial scale in continuous mode, productivities up to 20 g·m-2·day-1 of biomass rich in proteins (45%) and lipids (25%) being obtained. The utilization of this type of photobioreactors allows controlling the contamination and pH of the cultures, but daily variation of solar radiation imposes the existence of inadequate dissolved oxygen concentration and temperature at which the cells are exposed to inside the reactor. Excessive dissolved oxygen reduced the biomass productivity to 68% of maximal, whereas inadequate temperature reduces to 63% of maximal. Thus, optimally controlling these parameters the biomass productivity can be duplicated. These results confirm the potential to produce this valuable strain at commercial scale in optimally designed/operated tubular photobioreactors as a biotechnological industry.