Measurement and simulation of conducted disturbances on DC power grids of a HVDC system with an active DC/DC converter

With the increasing of the distributed generation, DC microgrids have become more and more common in the electrical network. To connect devices in a microgrid, converter are necessary, but they are also source of disturbances due to their functioning. In this thesis, measurement and simulation of conducted emissions, within the frequency range 2-150kHz, of a DC/DC buck converter are studied.

Real-time PMU monitoring of an IEEE 5-Bus Network implemented on OPAL system

This thesis studies the state-of-the-art of phasor measurement units (PMUs) as well as their metrological requirements stated in the IEEE C37.118.1 and C37.118.2 Standards for guaranteeing correct measurement performances. Communication systems among PMUs and their possible applicability in the field of power quality (PQ) assessment are also investigated. This preliminary study is followed by an analysis of the working principle of real-time (RT) simulators and the importance of hardware-in-the-loop (HIL) implementation, examining the possible case studies specific for PMUs, including compliance tests which are one of the most important parts. The core of the thesis is focused on the implementation of a PMU model in the IEEE 5-bus network in Simulink and in the validation of the results using OPAL RT-4510 as a real-time simulator. An initial check allows one to get an idea about the goodness of the results in Simulink, comparing the PMU data with respect to the load-flow steady-state information. In this part, accuracy indices are also calculated for both voltage and current synchrophasors. The following part consists in the implementation of the same code in OPAL-RT 4510 simulator, after which an initial analysis is carried out in a qualitative way in order to get a sense of the goodness of the outcomes. Finally, the confirmation of the results is based on an examination of the attained voltage and current synchrophasors and accuracy indices coming from Simulink models and from OPAL system, using a Matlab script. This work also proposes suggestions for an upcoming operation of PMUs in a more complex system as the Digital Twin (DT) in order to improve the performances of the already-existing protection devices of the distribution system operator (DSO) for a future enhancement of power systems reliability.

Hardware-in-the-loop implementation of single- and dual-phase shift control for dual active bridge converters in EV applications

Isolated DC-DC converters play a significant role in fast charging and maintaining the variable output voltage for EV applications. This study aims to investigate the different Isolated DC-DC converters for onboard and offboard chargers, then, once the topology is selected, study the control techniques and, finally, achieve a real-time converter model to accomplish Hardware-In-The-Loop (HIL) results. Among the different isolated DC-DC topologies, the Dual Active Bridge (DAB) converter has the advantage of allowing bidirectional power flow, which enables operating in both Grid to Vehicle (G2V) and Vehicle to Grid (V2G) modalities. Recently, DAB has been used in the offboard chargers for high voltage applications due to SiC and GaN MOSFETs; this new technology also allows the utilization of higher switching frequencies. By empowering soft switching techniques to reduce switching losses, higher switching frequency operation is possible in DAB. There are four phase shift control techniques for the DAB converter. They are Single Phase shift, Extended Phase shift, Dual Phase shift, Triple Phase shift controls. This thesis considers two control strategies; Single-Phase, and Dual-Phase shifts, to understand the circulating currents, power losses, and output capacitor size reduction in the DAB. Hardware-In-The-Loop (HIL) experiments are carried out on both controls with high switching frequencies using the PLECS software tool and the RT box supporting the PLECS. Root Mean Square Error is also calculated for steady-state values of output voltage with different sampling frequencies in both the controls to identify the achievable sampling frequency in real-time. DSP implementation is also executed to emulate the optimized DAB converter design, and final real-time simulation results are discussed for both the Single-Phase and Dual-Phase shift controls.

Optimal energy management of smart households with electric vehicles, energy storage and distributed generation

In this thesis, the optimal operation of a neighborhood of smart households in terms of minimizing the total energy cost is analyzed. Each household may comprise several assets such as electric vehicles, controllable appliances, energy storage and distributed generation. Bi-directional power flow is considered for each household . Apart from the distributed generation unit, technological options such as vehicle-to-home and vehicle-to-grid are available to provide energy to cover self-consumption needs and to export excessive energy to other households, respectively.

Innovative layout design and radiated harmonic analysis for advanced frequency-diverse array solutions

Wireless power transfer is becoming a crucial and demanding task in the IoT world. Despite the already known solutions exploiting a near-field powering approach, far-field WPT is definitely more challenging, and commercial applications are not available yet. This thesis proposes the recent frequency-diverse array technology as a potential candidate for realizing smart and reconfigurable far-field WPT solutions. In the first section of this work, an analysis on some FDA systems is performed, identifying the planar array with circular geometry as the most promising layout in terms of radiation properties. Then, a novel energy aware solution to handle the critical time variability of the FDA beam pattern is proposed. It consists on a time-control strategy through a triangular pulse, and it allows to achieve ad-hoc and real time WPT. Moreover, an essential frequency domain analysis of the radiating behaviour of a pulsed FDA system is presented. This study highlights the benefits of exploiting the intrinsic pulse harmonics for powering purposes, thus minimising the power loss. Later, the electromagnetic design of a radial FDA architecture is addressed. In this context, an exhaustive investigation on miniaturization techniques is carried out; the use of multiple shorting pins together with a meandered feeding network has been selected as a powerful solution to halve the original prototype dimension. Finally, accurate simulations of the designed radial FDA system are performed, and the obtained results are given.

Le reti di distribuzione idrica nella sicurezza antincendio - Verifiche con il codice INFOWORKS WS

Le reti di distribuzione idrica conservano un ruolo importante ed irrinunciabile nella sicurezza antincendio, ma diversi fattori sul piano normativo e strutturale limitano la loro potenzialità  nelle fasi di estinzione dell'incendio. Ma in che modo si è evoluta in Italia negli ultimi anni la lotta all'incendio? E' ormai noto che non esistono incendi standard, quelli per i quali è possibile definire procedure d'intervento e modalità  di estinzione; non è quindi banale identificare le portate antincendio necessarie (Needed Fire Flow) e il tempo per il quale esse devono essere garantite. In certi contesti è possibile ipotizzare un certo standard d'incendio ma ciò presuppone che edifici, strutture e tutto ciò che è sottoposto ad incendio, possano essere considerati fabbricati a "regola d'arte", ovvero realizzati attraverso procedure esecutive aventi standard di qualità  certificata. Ciò è stato affrontato nei criteri di realizzazione delle nuove costruzioni, ma le vecchie costruzioni, soprattutto gli edifici presenti nei centri storici, sono evidentemente più vulnerabili e sfuggono alla possibilità  di identificare affidabili valori del NFF. Il quadro che si presenta coinvolge quindi carenze normative, contesti urbani con differente vulnerabilità  e una sostanziale disomogeneità  prestazionale delle reti di distribuzione idrica presenti nel territorio nazionale, legata non solo alla disponibilità  idrica ma, anche e soprattutto, alla conformazione della rete, ai livelli di pressione ed alla specifica capacità della rete nel sostenere incrementi di flusso dovuto al prelievo dagli idranti stradali. La scarsa conoscenza di questi aspetti, piuttosto che tradursi in miglioramenti della rete idrica e della sua efficienza ai fini antincendio, ha portato nel tempo ad adottare soluzioni alternative che agiscono principalmente sulle modalità operative di utilizzo dei mezzi dei VV.F. e sul fronte dei dispositivi antincendio privati, quali una migliore protezione passiva, legata all'uso di materiali la cui risposta all'incendio fosse la minore possibile, e protezioni attive alternative, quali impianti sprinkler, di tipo aerosol o misti. Rimangono tutte le problematiche legate alla caratterizzazione nell'area urbanizzata in termini di risposta al prelievo per incendio dagli idranti pubblici sui quali la normativa vigente non impone regole circa le prestazioni e la loro dislocazione sul territorio. Questa incertezza spesso si traduce in un maggiore dispiego di mezzi rispetto all'entità dell'incendio ed ad una scarsa possibilità  di ottimizzare l'allocazione delle unità  operative dei VV.F., con un evidente incremento del rischio nel caso in cui si verifichino più eventi di incendio contemporaneamente. La simulazione numerica avanzata, su modelli opportunamente calibrati delle reti di distribuzione, può consentire una maggiore comprensione quantitativa del livello di sicurezza antincendio offerto da una rete di distribuzione idrica.

Apprendimento hebbiano in robotica: teoria e applicazione

Partendo dallo sviluppo della teoria dell'apprendimento Hebbiano, si delinea un percorso per la creazione di robot in grado di apprendere tramite architettura DAC e Value System.