Sintesi e caratterizzazione di prepolimeri per resine epossidiche derivanti da fonti rinnovabili e naturali attraverso un processo a basso impatto ambientale

La sostituzione di materie prime provenienti da risorse fossili con biomasse rinnovabili, utilizzando un processo a basso impatto ambientale, è una delle più importanti sfide della "Green Chemistry". Allo stesso tempo, la sintesi di resine epossidiche fornisce la chiave per la realizzazione di materiali ad alto valore aggiunto. Tuttavia, ad oggi, il 90% della produzione di resine epossidiche è basato sull'uso di bisfenolo A, che ha effetti di xenoestrogeno, ed epicloridrina, tossica e cancerogena. Su queste basi, è stata individuata una strategia sintetica per la sintesi di prepolimeri innovativi per resine epossidiche, che utilizza come substrato di reazione diidrossibenzeni di origine naturale ed evita l'uso di epicloridrina e altri reagenti tossici o pericolosi. La suddetta strategia sintetica è basata sulla sequenza: allilazione dei diidrossibenzeni - epossidazione dei doppi legami ottenuti. In questa procedura non vengono utilizzati drastiche condizioni di reazione e il solvente è acqua, con una catalisi di trasferimento di fase o, in aggiunte di acetonitrile, in un sistema bifasico. La resa complessiva dei due “step” dipende dalla posizione dei due ossidrili nei diidrossibenzeni. Il reagente che porta la resa massima è l’idrochinone (1,4 diidrossibenzene), che, come riportato in letteratura, permette la formazione di resine epossidiche con proprietà simili alle resine di epicloridrina e bisfenolo A. The substitution of raw materials from fossil fuels with renewable biomass using a low environmental impact process is one of the greatest challenges of the "Green Chemistry". At the same time, the synthesis of epoxy resins provides the key to the realization of high added value materials. However, 90% of the production of epoxy resins is based on the use of bisphenol A, a xenoestrogen, and epichlorohydrin, that is toxic and carcinogenic. On these bases, a synthetic strategy for the synthesis of innovative prepolymers of epoxy resins, that uses dihydroxybenzenes of natural origin as reaction substrates and avoids the use of epichlorohydrin and other toxic or dangerous reagents has been identified. The above synthetic strategy is based on the sequence: allylation of dihydroxybenzenes - epoxidation of the double bonds obtained. In this procedure, drastic reaction conditions are dismissed and the solvent used is water with a phase transfer catalysis or, in addition, acetonitrile in a biphasic system. The overall yield of the two steps depends on the position of the two hydroxyls of the dihydroxybenzenes. The reagent that leads to the highest yield is hydroquinone (1,4 dihydroxybenzene), which, as reported in literature, allows the formation of epoxy resins with similar properties to the resins from bisphenol A and epichlorohydrin.

Sintesi e caratterizzazione strutturale di derivati piperidinici e morfolinici chirali

The topic of this thesis concerns the study of catalytic processes for the synthesis of chiral 3,4,5-trisubstituted piperidine and 2,6-disubstituted morpholine. Substrates possessing an α,β-unsaturated ester and a ketone moiety, able to undergo addition/cyclization cascade reactions with different pro-nucleophiles (thiophenols, acetone cyanohydrin and malononitrile), have been evaluated. Chiral and achiral systems for phase-transfer catalysis have been applied as catalysts. Moderate enantiomeric excesses have been obtained for the morpholinic products and good to excellent values for the piperidinic products, by using cyclopeptoids and quaternary ammonium salts derived from Chincona alkaloids as catalysts respectively. Moreover, the absolute configuration of the 3,4,5-trisubstituted piperidines has been determined through quantomechanical simulations of their chirooptical spectra. Finally, the relative configuration of the 2,6-disubstituted morpholines has been assigned through NMR experiments.

Computational investigation of a stereoselective synthesis of atropisomeric hydrazides possessing an N–N stereogenic axis

Axially chiral substrates are an interesting and widely studied class of compounds as they can be found in bioactive natural products and are employed as functional materials or as ligands in asymmetric catalytic processes. One branch of this family is the well-known world of the atropisomers. Among them, atropisomeric compounds possessing an N–N stereogenic axis are one truthfully fascinating system but not completely understood yet. In this thesis, we computationally investigated the mechanism of the diastereoselective formation of the N – N chiral axis of a hydrazide under asymmetric phase transfer catalytic conditions. Moreover, during this study, torsional barriers have been calculated for both the reagent and the product at the density functional theory (DFT). These values turned out to suitably match the experimental values and observations. Finally, Electronic Circular Dichroism (ECD) spectra have been simulated in order to assign the chiral absolute configuration to the products.

Organocatalytic tandem reactions of polyfunctional compounds for the synthesis of enantioenriched heterocycles. Reazioni tandem organocatalitiche di composti polifunzionali per la sintesi di eterocicli enantioarricchiti.

In questo lavoro di tesi sono state sviluppate reazioni domino, tandem e procedure one-pot per ottenere eterocicli enatioarricchiti. Lo sviluppo di queste metodologie sintetiche è molto importante perché permettono di ottenere molecole complesse partendo da prodotti semplici, senza effettuare ripetuti passaggi di purificazione (stop-and-go or step-by-step synthesis). Lo scopo di questo lavoro è di ottenere derivati tetraidrofuranici modificati e derivati ossoazzolinici enantioarrichiti tramite reazioni SN2-Michael o tramite reazioni aldolica-ciclizzazione-Michael usando la catalisi asimmetrica a trasferimento di fase (PTC). Come catalizzatori PTC per imprimere enantioselezione sono stati utilizzati sali di ammonio quaternario derivati dagli alcaloidi della Cinchona. Sono state ottimizzate le condizioni di reazione (base inorganica, temperatura, solvente, tempo di reazione) per i diversi substrati presi in considerazione. I prodotti target sono stati ottenuti con buone rese, ottime diastereoselezioni ma con bassa enantioselezione. I risultati ottenuti richiedono un’ulteriore ottimizzazione e dovranno essere valutate variazioni strutturali dei nucleofili utilizzati. In this thesis were developed domino, tandem reactions and one-pot procedures to obtained enantioenriched heterocycles. The development of these methodologies is very fundamental because they allow to obtain complex molecules starting from raw materials, without carrying out repeated purification steps (stop-and-go or step-by-step synthesis). The purpose of this work is to obtain enantioenriched tetrahydrofuran and oxazoline derivatives through a SN2-Michael reaction or a aldol- cyclization-Michael reaction using the phase-transfer asymmetric catalysis (PTC). For imprint enantioselection we used Cinchona alkaloids quaternary ammonium salts derivatives. The reaction conditions (inorganic base, temperature, solvent, reaction time) were optimised for the different substrates taken into account. The target products were obtained with good yields, excellent diastereoselections but with low enantioselections. The obtained results require further optimization and structural changes in the nucleophiles used must be evaluated.

Synthesis, reactivity and applications of 3,5-dimethyl-4-nitroisoxazole derivatives

3,5-dimethyl-4-nitroisoxazole derivatives are useful synthetic intermediates as the isoxazole nucleus chemically behaves as an ester, but establish better-defined interactions with chiral catalysts and lability of its N-O aromatic bond can unveil other groups such as 1,3-dicarbonyl compounds or carboxylic acids. In the present work, these features are employed in a 3,5-dimethyl-4-nitroisoxazole based synthesis of the γ-amino acid pregabalin, a medication for the treatment of epilepsy and neuropatic pain, in which this moiety is fundamental for the enantioselective formation of a chiral center by interaction with doubly-quaternized cinchona phase-transfer catalysts, whose ability of asymmetric induction will be investigated. Influence of this group in cinchona-derivatives catalysed stereoselective addition and Darzens reaction of a mono-chlorinated 3,5-dimethyl-4-nitroisoxazole and benzaldehyde will also be investigated.

Determinazione delle barriere rotazionali di nuovi atropisomeri N-N: confronto tra metodi DFT e sperimentali.

Theoretical DFT calculations on rotational barriers of tetrasubstituted hydrazines were performed in order to synthesize new enantioenriched atropoisomers with chiral N-N axis. The molecules studied were chosen to be subsequently synthesized through asymmetric organocatalysis. New atropoisomers with chiral N-N axis were synthesized through organocatalysis methods via enamine or phase transfer. Cinchona alkaloid derivatives were used as catalysts. HPLC analyzes show that the three new synthesized molecules are atropoisomers at room temperature. Using an asymmetric procedure to synthesize the molecules studied, it was possible to generate enantiomeric excesses that remained unchanged for more than three weeks. The experimental rotational barrier of one of the three synthesized compounds was calculated. The experimental energy barrier at 25°C (ΔG^≠=25,7 kcal/mol) was lower than the DFT calculations and with a tendency to increase with temperature, due to a negative reaction entropy.

Beyond simple proton transfer processes: domino reactions between 4-substituted indoles and nitroethene as a new gateway to ergot alkaloids

The multimodal biology activity of ergot alkaloids is known by humankind since middle ages. Synthetically modified ergot alkaloids are used for the treatment of various medical conditions. Despite the great progress in organic syntheses, the total synthesis of ergot alkaloids remains a great challenge due to the complexity of their polycyclic structure with multiple stereogenic centres. This project has developed a new domino reaction between indoles bearing a Michael acceptor at the 4 position and nitroethene, leading to potential ergot alkaloid precursors in highly enantioenriched form. The reaction was optimised and applied to a large variety of substrate with good results. Even if unfortunately all attempts to further modify the obtained polycyclic structure failed, it was found a reaction able to produce the diastereoisomer of the polycyclic product in excellent yields. The compounds synthetized were characterized by NMR and ESIMS analysis confirming the structure and their enantiomeric excess was determined by chiral stationary phase HPLC. The mechanism of the reaction was evaluated by DFT calculations, showing the formation of a key bicoordinated nitronate intermediate, and fully accounting for the results observed with all substrates. The relative and absolute configuration of the adducts were determined by a combination of NMR, ECD and computational methods.

Investigation of gold-based catalysts for liquid phase oxidation of glucose to glucaric acid

Glucaric acid (GA) is one of the building block chemicals derived from sugar biomass with higher added value. Nowadays, GA is produced by oxidation of glucose (Glu) with either stoichiometric oxidants (HNO3), or by means of electrochemical or biochemical synthesis. However, these processes show drawbacks from either the environmental or economic viewpoint. For this reason, gold nanoparticles (Au NPs) supported on activated carbon (AC) have been studied as catalysts for the oxidation of Glu, using O2 as oxidant in the presence of a base. Using sol immobilization technique, Au NPs have been supported on AC following different experimental procedures. UV-Vis spectroscopy, XRD, TEM and TG analysis were utilized in the characterization of the catalysts. The operational conditions were optimized obtaining 24% of yield of GA, 37% to GO and 27% to byproducts in 1 h, 1000 rpm, 10 bar of O2 and Glu:Au:NaOH molar ratio of 1000:1:3000. Under such conditions, catalysts show relatively high Glu conversion (≥82%) with different GA yields. GO+GA yield is around 58-61%. Therefore, the oxidation reaction was performed at 15 min where Au/AC PVA0 reached the highest yield of GA (16%) and Au/AC PVA2.4 gave the lowest (8%). It is evident that the presence of PVA influences to a higher degree the reaction rate than the Au NPs size. Hence, the effect of different heat treatments where applied for the removal of PVA: washing with water at 60℃ or heat treatment (120-250℃) with Air/H2. Washing treatment and heat treatment at 120℃ with Air/H2 may have resulted in the mildest treatments for the removal of PVA. Finally, two different supports have been used in order to study the effect of metal-support interaction in the immobilization of Au NPs: ZrO2 and AC. Au/AC catalyst demonstrated a higher conversion of GO to GA at short reaction times (15.1% yield GA) compared to Au/ZrO2 (2.4% yield GA).

Precise Near-Field Focusing exploiting Bessel Beam Launchers for Wireless Power Transfer at millimeter waves

Wireless Power Transfer has become a promising technology to overcome the limits of wired solutions. Within this framework, the objective of this thesis is to study a WPT link at millimeter waves involving a particular type of antenna working in the radiative near-field, known as Bessel Beam (BB) Launcher. This antenna has been chosen for its peculiarity of generating a Bessel Beam which is by nature non-diffractive, showing good focusing and self-healing capabilities. In particular, a Bull-Eye Leaky Wave Antenna is designed and analysed, fed by a loop antenna and resonating at approximately 30 GHz. The structure excites a Hybrid-TE mode showing zeroth-order Bessel function over the z-component of the magnetic field. The same antenna is designed with two different dimensions, showing good wireless power transport properties. The link budgets obtained for different configurations are reported. With the aim of exploiting BB Launchers in wearable applications, a further analysis on the receiving part is conducted. For WPT wearable or implantable devices a reduced dimension of the receiver system must be considered. Therefore, an electrically large loop antenna in planar technology is modified, inserting phase shifters in order to increase the intensity of the magnetic field in its interrogation zone. This is fundamental when a BB Launcher is involved as transmitter. The loop antenna, in reception, shows a further miniaturization level since it is built such that its interrogation zone corresponds to the main beam dimension of transmitting BB Launcher. The link budget is evaluated with the new receiver showing comparable results with respect to previous configurations, showing an efficient WPT link for near-field focusing. Finally, a matching network and a full-wave rectifying circuit are attached to two of the different receiving systems considered. Further analysis will be carried out about the robustness of the square loop over biological tissues.

Design and Implementation of Single phase 230V to Three Phase Inverter Based on the Embedded System STM-32 Applied to motor control

In the field of Power Electronics, several types of motor control systems have been developed using STM microcontroller and power boards. In both industrial power applications and domestic appliances, power electronic inverters are widely used. Inverters are used to control the torque, speed, and position of the rotor in AC motor drives. An inverter delivers constant-voltage and constant-frequency power in uninterruptible power sources. Because inverter power supplies have a high-power consumption and low transfer efficiency rate, a three-phase sine wave AC power supply was created using the embedded system STM32, which has low power consumption and efficient speed. It has the capacity of output frequency of 50 Hz and the RMS of line voltage. STM32 embedded based Inverter is a power supply that integrates, reduced, and optimized the power electronics application that require hardware system, software, and application solution, including power architecture, techniques, and tools, approaches capable of performance on devices and equipment. Power inverters are currently used and implemented in green energy power system with low energy system such as sensors or microcontroller to perform the operating function of motors and pumps. STM based power inverter is efficient, less cost and reliable. My thesis work was based on STM motor drives and control system which can be implemented in a gas analyser for operating the pumps and motors. It has been widely applied in various engineering sectors due to its ability to respond to adverse structural changes and improved structural reliability. The present research was designed to use STM Inverter board on low power MCU such as NUCLEO with some practical examples such as Blinking LED, and PWM. Then we have implemented a three phase Inverter model with Steval-IPM08B board, which converter single phase 230V AC input to three phase 380 V AC output, the output will be useful for operating the induction motor.