Applicazione di materiali compositi nel consolidamento statico delle strutture in legno

L’uso di materiali compositi nel rinforzo delle strutture in legno sotto l’azione dei carichi, richiede particolare attenzione ad importanti aspetti. Per esempio, è molto importante pianificare il tipo di intervento da realizzare. Infatti esistono varie tecniche per rinforzare elementi lignei usando diversi “layouts” degli FRP, ognuno dei quali può conferire risultati diversi. Come riporta la figura 55 [31], ci possono essere diverse tipologie di applicazione dei rinforzi.

Esperienza di creazione di entrate lessicografiche combinatorie: metodi e dati dal progetto CombiNet

The present dissertation aims at simulating the construction of lexicographic layouts for an Italian combinatory dictionary based on real linguistic data, extracted from corpora by using computational methods. This work is based on the assumption that the intuition of the native speaker, or the lexicographer, who manually extracts and classifies all the relevant data, are not adequate to provide sufficient information on the meaning and use of words. Therefore, a study of the real use of language is required and this is particularly true for dictionaries that collect the combinatory behaviour of words, where the task of the lexicographer is to identify typical combinations where a word occurs. This study is conducted in the framework of the CombiNet project aimed at studying Italian Word Combinationsand and at building an online, corpus-based combinatory lexicographic resource for the Italian language. This work is divided into three chapters. Chapter 1 describes the criteria considered for the classification of word combinations according to the work of Ježek (2011). Chapter 1 also contains a brief comparison between the most important Italian combinatory dictionaries and the BBI Dictionary of Word Combinations in order to describe how word combinations are considered in these lexicographic resources. Chapter 2 describes the main computational methods used for the extraction of word combinations from corpora, taking into account the advantages and disadvantages of the two methods. Chapter 3 mainly focuses on the practical word carried out in the framework of the CombiNet project, with reference to the tools and resources used (EXTra, LexIt and "La Repubblica" corpus). Finally, the data extracted and the lexicographic layout of the lemmas to be included in the combinatory dictionary are commented, namely the words "acqua" (water), "braccio" (arm) and "colpo" (blow, shot, stroke).

User centered retrofit: The case of kadk campus, Copenhagen, (dk)

The following research thesis is about a retrofit project made in Denmark, Copenhagen, and carried out on one of the buildings belonging to the Royal Danish Academy. The key assumption and base of the entire research process is that, up to now, the standard procedure in retrofit cases like this provides as comparative method between de facto and design, the use of Energy Simulation software. These programs generally divide the space into different thermal zones, assigning to each of them different levels of employment, activities, set-point temperatures set for cooling and heating analysis and so on, but always providing average and constant values, usually taken in the middle point of the single thermal zone. Therefore, the project and its research path stems from the attempt to investigate the potentialities of this kind of designing for retrofit process, as previously anticipated not antithetical but complementary to that classic energy-based retrofit, thus passing from the building scale, and all its thermal zones, to the users' scale, related to humans and microclimates. The main software used in this process is Autodesk Simulation CFD. The idea behind the project is that in certain situations, for example, it will not be necessary to add throughout insulation layers (previously parameterized and optimized with Design Builder), and that even in Winter conditions, due maybe to the users' activities, the increased level of clothing (clo) and the heat produced by equipments, thermal comfort could be achieved also in areas characterized by considerably lower MRT. After the analysis of the State of Art and its simulations, the project has still been supported by the tool itself, the CFD Software, in an iterative process aimed at achieving visible improvements in terms of MRT, on spaces with different needs and characteristics, both in Winter and Summer regimes.

Characterization of a 3D-printed low-cost flexible dielectric material for the realization of innovative WPT wearable applications

The aim of this thesis is to demonstrate that 3D-printing technologies can be considered significantly attractive in the production of microwave devices and in the antenna design, with the intention of making them lightweight, cheaper, and easily integrable for the production of wireless, battery-free, and wearable devices for vital signals monitoring. In this work, a new 3D-printable, low-cost resin material, the Flexible80A, is proposed as RF substrate in the implementation of a rectifying antenna (rectenna) operating at 2.45 GHz for wireless power transfer. A careful and accurate electromagnetic characterization of the abovementioned material, revealing it to be a very lossy substrate, has paved the way for the investigation of innovative transmission line and antenna layouts, as well as etching techniques, possible thanks to the design freedom enabled by 3D-printing technologies with the aim of improving the wave propagation performance within lossy materials. This analysis is crucial in the design process of a patch antenna, meant to be successively connected to the rectifier. In fact, many different patch antenna layouts are explored varying the antenna dimensions, the substrate etchings shape and position, the feeding line technology, and the operating frequency. Before dealing with the rectification stage of the rectenna design, the hot and long-discussed topic of the equivalent receiving antenna circuit representation is addressed, providing an overview of the interpretation of different authors about the issue, and the position that has been adopted in this thesis. Furthermore, two rectenna designs are proposed and simulated with the aim of minimizing the dielectric losses. Finally, a prototype of a rectenna with the antenna conjugate matched to the rectifier, operating at 2.45 GHz, has been fabricated with adhesive copper on a substrate sample of Flexible80A and measured, in order to validate the simulated results.

HBIM to Virtual Reality Workflow for Industrial Archaeology Immovable Assets’ Management: A Case Study

As a witness on the industrialization in Bologna, since its first generation was born in the late 1760, the Battiferro lock has been coping with the innovation that the city experienced throughout the centuries, until it has lost its functionality due to the technological development for which Bologna’s canals were gradually covered starting from the 1950s under Giuseppe Dozza ’s administration, as part of the reconstruction, reclamation and urban requalification that was carried out in the aftermath the World War II and which involved the whole city. The interest of the research carried out on this case study was primarily to reintroduce the landmark that is still intact, to what is considered to be the fourth generation of the industrial revolution, namely in the construction field, which is recognized as Construction 4.0, by means of the Historic (or Heritage) Information Modeling HBIM and Virtual Reality (VR) application. A scan-to-BIM approach was followed to create 3D as-built BIM model, as a first step towards the storytelling of the abandoned industrial built asset in VR environment, or as a seed for future applications such as Digital Twins (DT), heritage digital learning, sustainable impact studies, and/or interface with other interfaces such as GIS. Based on the HBIM product, examples of the primary BIM deliverables such as 2D layouts is given, then a workflow to VR is proposed and investigated the reliability of data and the type of users that may benefit of the VR experience, then the potential future development of the model is investigated, with comparison of a relatively similar experience in the UK.