Divergence patterns in Fucus seaweeds (Phaeophyceae) in the northern Baltic Sea and in the Tjongspollen area

To be able to interpret patterns of biodiversity it is important to understand the processes by which new species evolve and how closely related species remain reproductively isolated and ecologically differentiated. Divergence and differentiation can vary during speciation and it can be seen in different stages. Groups of closely related taxa constitute important case studies to understand species and new biodiversity formation. However, it is important to assess the divergence among them at different organismal levels and from an integrative perspective. For this purpose, this study used the brown seaweeds genus Fucus as a model to study speciation, as they constitute a good opportunity to study divergence at different stages. We investigated the divergence patterns in Fucus species from two marginal areas (northern Baltic Sea and the Tjongspollen area), based on phenetic, phylogenetic and biological taxonomical criteria that are respectively characterised by algal morphology, allele frequencies of five microsatellite loci and levels of secondary polyphenolic compounds called phlorotannins. The results from this study showed divergence at morphological and genetic levels to certain extent but complete lack of divergence at biochemical level (i.e. constitutive phlorotannin production) in the Baltic Sea or Norway. Morphological divergence was clearly evident in Tjongspollen (Norway) among putative taxa as they were identified in the field and this divergence corresponds with their neutral genetic divergence. In the Baltic, there are some distinguishable patterns in the morphology of the swedish and finnish individuals according to locality to certain extent but not among putative taxa within localities. Likewise, these morphological patterns have genetic correspondence among localities but not within each locality. At the biochemical level, measured by the phlorotannin contents there were neither evidence of divergence in Norway or the Baltic Sea nor any discernable aggregation pattern among or within localities. Our study have contributed with further understanding of the Baltic Sea Fucus system and its intriguingly rapid and recent divergence as well as of the Tjongspollen area systems where formally undescribed individuals have been observed for the first time; in fact they appear largely differentiated and they may well warrant a new species status. In current times, climate change threatens, peripheral ecosystems, biodiversity, and increased knowledge of processes generating and maintaining biodiversity in those ecosystems seem particularly important and needed.

Dynamic mechanical-thermal, microstructural and mechanical analysis of ultra-light polymer-metal composites: influence of forming

A really particular and innovative metal-polymer sandwich material is Hybrix. Hybrix is a product developed and manufactured by Lamera AB, Gothenburg, Sweden. This innovative hybrid material is composed by two relatively thin metal layers if compared to the core thickness. The most used metals are aluminum and stainless steel and are separated by a core of nylon fibres oriented perpendicularly to the metal plates. The core is then completed by adhesive layers applied at the PA66-metal interface that once cured maintain the nylon fibres in position. This special material is very light and formable. Moreover Hybrix, depending on the specific metal which is used, can achieve a good corrosion resistance and it can be cut and punched easily. Hybrix architecture itself provides extremely good bending stiffness, damping properties, insulation capability, etc., which again, of course, change in magnitude depending in the metal alloy which is used, its thickness and core thickness. For these reasons nowadays it shows potential for all the applications which have the above mentioned characteristic as a requirement. Finally Hybrix can be processed with tools used in regular metal sheet industry and can be handled as solid metal sheets. In this master thesis project, pre-formed parts of Hybrix were studied and characterized. Previous work on Hybrix was focused on analyze its market potential and different adhesive to be used in the core. All the tests were carried out on flat unformed specimens. However, in order to have a complete description of this material also the effect of the forming process must be taken into account. Thus the main activities of the present master thesis are the following: Dynamic Mechanical-Thermal Analysis (DMTA) on unformed Hybrix samples of different thickness and on pre-strained Hybrix samples, pure epoxy adhesive samples analysis and finally moisture effects evaluation on Hybrix composite structure.

Evaluation of the microstructural pattern and mechanical behaviour of human metastatic vertebrae

La spina dorsale è uno dei principali siti di sviluppo di metastasi ossee. Queste alterano sia la composizione strutturale che il comportamento meccanico delle vertebre metastatiche, riducendone la resistenza meccanica ed aumentandone il rischio di rottura. Questo studio ha valutato la composizione microstrutturale ed il comportamento meccanico a rottura in specifiche regioni all’interno di vertebre metastatiche. 11 segmenti vertebrali da cadavere, costituiti da una vertebra sana ed una con metastasi (litica, mista o blastica), sono stati testati con carichi graduali di compressione e scansionati con microCT. Le deformazioni interne sono state misurate tramite un algoritmo globale di Digital Volume Correlation (DVC). I risultati dall’analisi microstrutturale hanno mostrato l’ influenza sulla microstruttura delle diverse tipologie di metastasi in corrispondenza della lesione, mentre le caratteristiche microstrutturali nelle regioni intorno alla lesione sono risultate simili a quelle delle vertebre sane. L’analisi delle deformazioni ha inoltre permesso di valutare l’ effetto delle diverse tipologie di metastasi nel compromettere la stabilità spinale. Le vertebre con metastasi litiche hanno raggiunto deformazioni maggiori in corrispondenza della lesione, regione meccanicamente più debole e con una microstruttura maggiormente compromessa a causa della metastasi. Le vertebre con metastasi blastiche hanno raggiunto deformazioni minori nella lesione, regione che ha mostrato una maggiore resistenza meccanica ai carichi, e deformazioni maggiori nelle zone più lontane. Le vertebre con metastasi miste hanno mostrato un comportamento meccanico non univoco, legato alla predominanza di una lesione sull’altra. Infatti, la posizione e la proporzione tra le due lesioni sembra influenzare il comportamento meccanico. I risultati di questo studio, una volta generalizzati, potrebbero portare alla spiegazione delle cause di instabilità meccanica nelle vertebre metastatiche.

Development of a novel heat treatment for high performances L-PBF Ti6Al4V alloy: microstructural and mechanical characterization

This work presents the experimental development of a novel heat treatment for a high performance Laser Powder Bed Fusion Ti6Al4V alloy. Additive manufacturing production processes for titanium alloys are particularly of interest in cutting-edge engineering fields, however, high frequency laser induced thermal cycles generate a brittle as built microstructure. For this reason, heat treatments compliant with near net shape components are needed before their homologation and usage. The experimental campaign focused on the development of a multi-step heat treatment leading to a bilamellar microstructure. In fact, according to literature, such a microstructure should be promising in terms of mechanical properties both under static and cyclic loads. The heat treatment development has asked for the preliminary analyses of samples annealed and aged in laboratory, implementing several cycles, differing for what concerns temperatures, times and cooling rates. Such a characterization has been carried out through optical and electron microscopy analyses, image analyses, hardness and tensile tests. As a result, the most suitable thermal cycle has been selected and performed using industrial equipment on mini bending fatigue samples with different surface conditions. The same tests have been performed on a batch of traditionally treated samples, to provide with a comparison. This master thesis activity has finally led to the definition of a heat treatment resulting into a bilamellar microstructure, promising in terms of fatigue performances with respect to the traditionally treated alloy ones. The industrial implementation of such a heat treatment will require further improvements, particularly for what concerns the post annealing water quench, in order to prevent any surface alteration potentially responsible for the fatigue performances drop. Further development of the research may also include push-pull fatigue tests, crack grow propagation and residual stresses analyses.

Design, fabrication and mechanical characterization of a structural node made using Wire and Arc Additive Manufacturing (WAAM) technology

Additive Manufacturing (AM), also known as “3D printing”, is a recent production technique that allows the creation of three-dimensional elements by depositing multiple layers of material. This technology is widely used in various industrial sectors, such as automotive, aerospace and aviation. With AM, it is possible to produce particularly complex elements for which traditional techniques cannot be used. These technologies are not yet widespread in the civil engineering sector, which is slowly changing thanks to the advantages of AM, such as the possibility of realizing elements without geometric restrictions, with less material usage and a higher efficiency, in particular employing Wire-and-Arc Additive Manufacturing (WAAM) technology. Buildings that benefit most from AM are all those structures designed using form-finding and free-form techniques. These include gridshells, where joints are the most critical and difficult elements to design, as the overall behaviour of the structure depends on them. It must also be considered that, during the design, the engineer must try to minimize the structure's own weight. Self-weight reductions can be achieved by Topological Optimization (TO) of the joint itself, which generates complex geometries that could not be made using traditional techniques. To sum up, weight reductions through TO combined with AM allow for several potential benefits, including economic ones. In this thesis, the roof of the British Museum is considered as a case study, analysing the gridshell structure of which a joint will be chosen to be designed and manufactured, using TO and WAAM techniques. Then, the designed joint will be studied in order to understand its structural behaviour in terms of stiffness and strength. Finally, a printing test will be performed to assess the production feasibility using WAAM technology. The computational design and fabrication stages were carried out at Technische Universität Braunschweig in Germany.

No(i)rthern Ireland: Crime fiction and the northern-irish scene. Proposed translation into italian of two short stories from "belfast noir"

The present thesis aims at proving the importance of cultural and literary contexts in the practice of translation: I shall show that, in the case of Northern Irish crime fiction, knowledge of both Northern Irish history and culture as well as of the genre of crime fiction are essential prerequisites for the production of a “responsible” translation. I will therefore offer a brief overview of the history of crime and detective fiction and its main subgenres; some of the most important authors and works will be presented as well, in an analysis that goes from the early years of the genre to the second half of the 20th century. I will then move the focus to Northern Ireland, its culture and its history, and particular attention will be paid to fiction writing in Ireland and Northern Ireland, with a focus on the peculiar phenomenon of “Troubles Trash”. I will tackle the topic of Northern Irish literature and present the contemporary scene of Northern Irish crime fiction; the volume from which the texts for the translation have been taken will be presented, namely Belfast Noir. Subsequently the focus will move on the theoretical framework within which the translations were produced: I will present a literary review of the most significative developments in Translation Studies, with particular attention to the “cultural turn” that has characterised this subject since the 1960s. I will then highlight the phenomenon of “realia” in translation and analyse the approaches of different scholars to the translation of culture-bound references. The final part represents the culmination and practical application of all that was presented in the previous sections: I will discuss the translation of culture-bound references according to the strategies presented in Chapter 4, referring to the proposed translations of two stories. Such analysis aims to show that not only expert linguistic knowledge, but also cultural awareness and a wide literary background are needed in order to make conscious choices in translation.