Design of alternative energy storage systems for hybrid vehicles based on statistical processing of driving cycles information

Hybrid vehicles represent the future for automakers, since they allow to improve the fuel economy and to reduce the pollutant emissions. A key component of the hybrid powertrain is the Energy Storage System, that determines the ability of the vehicle to store and reuse energy. Though electrified Energy Storage Systems (ESS), based on batteries and ultracapacitors, are a proven technology, Alternative Energy Storage Systems (AESS), based on mechanical, hydraulic and pneumatic devices, are gaining interest because they give the possibility of realizing low-cost mild-hybrid vehicles. Currently, most literature of design methodologies focuses on electric ESS, which are not suitable for AESS design. In this contest, The Ohio State University has developed an Alternative Energy Storage System design methodology. This work focuses on the development of driving cycle analysis methodology that is a key component of Alternative Energy Storage System design procedure. The proposed methodology is based on a statistical approach to analyzing driving schedules that represent the vehicle typical use. Driving data are broken up into power events sequence, namely traction and braking events, and for each of them, energy-related and dynamic metrics are calculated. By means of a clustering process and statistical synthesis methods, statistically-relevant metrics are determined. These metrics define cycle representative braking events. By using these events as inputs for the Alternative Energy Storage System design methodology, different system designs are obtained. Each of them is characterized by attributes, namely system volume and weight. In the last part the work, the designs are evaluated in simulation by introducing and calculating a metric related to the energy conversion efficiency. Finally, the designs are compared accounting for attributes and efficiency values. In order to automate the driving data extraction and synthesis process, a specific script Matlab based has been developed. Results show that the driving cycle analysis methodology, based on the statistical approach, allows to extract and synthesize cycle representative data. The designs based on cycle statistically-relevant metrics are properly sized and have satisfying efficiency values with respect to the expectations. An exception is the design based on the cycle worst-case scenario, corresponding to same approach adopted by the conventional electric ESS design methodologies. In this case, a heavy system with poor efficiency is produced. The proposed new methodology seems to be a valid and consistent support for Alternative Energy Storage System design.

Night Vision Imaging System (NVIS) certification requirements analysis of an Airbus Helicopters H135

The safe operation of nighttime flight missions would be enhanced using Night Vision Imaging Systems (NVIS) equipment. This has been clear to the military since 1970s and to the civil helicopters since 1990s. In these last months, even Italian Emergency Medical Service (EMS) operators require Night Vision Goggles (NVG) devices that therefore amplify the ambient light. In order to fly with this technology, helicopters have to be NVIS-approved. The author have supported a company, to quantify the potentiality of undertaking the certification activity, through a feasibility study. Even before, NVG description and working principles have been done, then specifications analysis about the processes to make a helicopter NVIS-approved has been addressed. The noteworthy difference between military specifications and the civilian ones highlights non-irrevelant lacks in the latter. The activity of NVIS certification could be a good investment because the following targets have been achieved: Reductions of the certification cost, of the operating time and of the number of non-compliance.

Real Driving Emissions: analisi e sperimentazione di metodologie di selezione dei percorsi su strada e di definizione di cicli di laboratorio

La presente tesi si occupa di identificare la metodologia utilizzata per la definizione di percorsi Real Driving Emissions. Nel particolare sono stati individuati due percorsi, uno in piano, definite RDE Moderate Track ed uno in quota, definito RDE Extended Track. Si è anche eseguita una analisi dei cicli su banco a rulli NEDC e WLTC in ottica Real Driving Emissions.

Development of an innovative non rule-based energy management strategy for a Hybrid Electric Vehicle, structured for predictive driving controls based on external information knowledge

Recently, the interest of the automotive market for hybrid vehicles has increased due to the more restrictive pollutants emissions legislation and to the necessity of decreasing the fossil fuel consumption, since such solution allows a consistent improvement of the vehicle global efficiency. The term hybridization regards the energy flow in the powertrain of a vehicle: a standard vehicle has, usually, only one energy source and one energy tank; instead, a hybrid vehicle has at least two energy sources. In most cases, the prime mover is an internal combustion engine (ICE) while the auxiliary energy source can be mechanical, electrical, pneumatic or hydraulic. It is expected from the control unit of a hybrid vehicle the use of the ICE in high efficiency working zones and to shut it down when it is more convenient, while using the EMG at partial loads and as a fast torque response during transients. However, the battery state of charge may represent a limitation for such a strategy. That’s the reason why, in most cases, energy management strategies are based on the State Of Charge, or SOC, control. Several studies have been conducted on this topic and many different approaches have been illustrated. The purpose of this dissertation is to develop an online (usable on-board) control strategy in which the operating modes are defined using an instantaneous optimization method that minimizes the equivalent fuel consumption of a hybrid electric vehicle. The equivalent fuel consumption is calculated by taking into account the total energy used by the hybrid powertrain during the propulsion phases. The first section presents the hybrid vehicles characteristics. The second chapter describes the global model, with a particular focus on the energy management strategies usable for the supervisory control of such a powertrain. The third chapter shows the performance of the implemented controller on a NEDC cycle compared with the one obtained with the original control strategy.

Motion Cueing Algorithm Development in a 2DOF Driving Simulator: a Driving Behaviour-Centered Approach

I simulatori di guida sono strumenti altamente tecnologici che permettono di svolgere attività di ricerca in vari ambiti quali la psicologia, la medicina e l’ingegneria. Tuttavia, affinché i dati ottenuti mediante le simulazioni siano rapportabili alla loro controparte reale, la fedeltà delle componenti del simulatore di guida deve essere elevata. Questo lavoro tratta del miglioramento del sistema di restituzione del movimento nel simulatore a due gradi di libertà (2DOF) SIMU-LACET Driving Simulator, costruito e sviluppato presso il laboratorio LEPSIS dell’IFSTTAR (Istituto Francese delle Scienze e Tecnologie dei Trasporti, dello Sviluppo e delle Reti), in particolare nella sua sede di Parigi – Marne-la-Vallée. Si è deciso di andare a riprogettare la parte software del sistema di restituzione del movimento (motion cueing), operando su due elementi principali: lo scale factor (fattore di scala) applicato agli impulsi dinamici provenienti dal modello veicolare e i Motion Cueing Algorihms (MCA, algoritmi di restituzione del movimento), questo per entrambi i gradi di libertà. Si è quindi intervenuti sul modello esistente implementato in MATLAB-Simulink nello specifico blocco del motion cueing sul surge (traslazione longitudinale) e sul yaw (imbardata). Riguardo lo scale factor, è stata introdotta una metodologia per creare uno scale factor non lineare in forma esponenziale, tale da migliorare la restituzione degli impulsi meno ampi, pur rispettando i limiti fisici della piattaforma di movimento. Per quanto concerne il MCA, si sono vagliate diverse transfer function dell’algoritmo classico. La scelta finale dei MCA e la validazione del motion cueig in genere è stata effettuata mediante due esperimenti ed il giudizio dei soggetti che vi hanno partecipato. Inoltre, in virtù dei risultati del primo esperimento, si è investigata l’influenza che la strategia in merito al cambio delle marce avesse sulla percezione del movimento da parte del guidatore.

Texting and Driving: rilevazione di utilizzo dello smartphone alla guida tramite Object Detection e Machine Learning

Questa tesi si ispira a lavori precedentemente portati avanti da altri studenti e si pone il problema della possibilit\`a di riconoscere se uno smartphone \`e utilizzato da un utente mentre esso si trova alla guida di un'autovettura. In essa verranno presentati vari metodi per risolvere questo problema di Machine Learning, ovvero realizzazione di dataset per l'allenamento di modelli e creazione e allenamento di modelli stessi, dediti al riconoscimento di un problema di classificazione binaria e riconoscimento di oggetti tramite Object Detection. Il cercare di riconoscere se l'utente \`e alla guida o meno, avverr\`a tramite l'output della fotocamera frontale dello smartphone, quindi lavoreremo su immagini, video e frame. Arriveremo a riconoscere la posizione della persona rappresentata da questi fotogrammi tramite un modello di Object Detection, che riconosce cintura e finestrino e determina se sono appartenenti al sedile e alla posizione del conducente o del passeggero. Vedremo alla fine, attraverso un'attenta analisi dei risultati ottenuti su ben 8 video diversi che saranno divisi in molti frame, che si ottengono risultati molto interessanti, dai quali si pu\`o prendere spunto per la creazione di un importante sistema di sicurezza alla guida.

Design and implementation of an optimal motion cueing algorithm for the Stuttgart Driving Simulator

Driving simulators emulate a real vehicle drive in a virtual environment. One of the most challenging problems in this field is to create a simulated drive as real as possible to deceive the driver's senses and cause the believing to be in a real vehicle. This thesis first provides an overview of the Stuttgart driving simulator with a description of the overall system, followed by a theoretical presentation of the commonly used motion cueing algorithms. The second and predominant part of the work presents the implementation of the classical and optimal washout algorithms in a Simulink environment. The project aims to create a new optimal washout algorithm and compare the obtained results with the results of the classical washout. The classical washout algorithm, already implemented in the Stuttgart driving simulator, is the most used in the motion control of the simulator. This classical algorithm is based on a sequence of filters in which each parameter has a clear physical meaning and a unique assignment to a single degree of freedom. However, the effects on human perception are not exploited, and each parameter must be tuned online by an engineer in the control room, depending on the driver's feeling. To overcome this problem and also consider the driver's sensations, the optimal washout motion cueing algorithm was implemented. This optimal control-base algorithm treats motion cueing as a tracking problem, forcing the accelerations perceived in the simulator to track the accelerations that would have been perceived in a real vehicle, by minimizing the perception error within the constraints of the motion platform. The last chapter presents a comparison between the two algorithms, based on the driver's feelings after the test drive. Firstly it was implemented an off-line test with a step signal as an input acceleration to verify the behaviour of the simulator. Secondly, the algorithms were executed in the simulator during a test drive on several tracks.