Design and implementation of an optimal motion cueing algorithm for the Stuttgart Driving Simulator

Driving simulators emulate a real vehicle drive in a virtual environment. One of the most challenging problems in this field is to create a simulated drive as real as possible to deceive the driver's senses and cause the believing to be in a real vehicle. This thesis first provides an overview of the Stuttgart driving simulator with a description of the overall system, followed by a theoretical presentation of the commonly used motion cueing algorithms. The second and predominant part of the work presents the implementation of the classical and optimal washout algorithms in a Simulink environment. The project aims to create a new optimal washout algorithm and compare the obtained results with the results of the classical washout. The classical washout algorithm, already implemented in the Stuttgart driving simulator, is the most used in the motion control of the simulator. This classical algorithm is based on a sequence of filters in which each parameter has a clear physical meaning and a unique assignment to a single degree of freedom. However, the effects on human perception are not exploited, and each parameter must be tuned online by an engineer in the control room, depending on the driver's feeling. To overcome this problem and also consider the driver's sensations, the optimal washout motion cueing algorithm was implemented. This optimal control-base algorithm treats motion cueing as a tracking problem, forcing the accelerations perceived in the simulator to track the accelerations that would have been perceived in a real vehicle, by minimizing the perception error within the constraints of the motion platform. The last chapter presents a comparison between the two algorithms, based on the driver's feelings after the test drive. Firstly it was implemented an off-line test with a step signal as an input acceleration to verify the behaviour of the simulator. Secondly, the algorithms were executed in the simulator during a test drive on several tracks.

Analisi sperimentale sull'utilizzo del Microsoft Kinect One come sistema di Body Tracking per la realta virtuale in riabilitazione

In questo progetto di tesi sarà innanzitutto presentato il Kinect One e sarà fatta una panoramica sull’uso della realtà virtuale in ambito riabilitativo. In seguito sarà analizzato l’algoritmo di Body tracking, valutandone il comportamento in diverse situazioni pratiche e poi stimandone la precisione in statica. Sarà presentato un filtraggio per limitare il rumore in tempo reale e valutarne i pro ed i contro in funzione delle caratteristiche impostabili. Saranno presentate inoltre le metodologie con cui gli algoritmi integrati del Kinect permettono di ricavare una stima dell’orientamento delle parti anatomiche nello spazio ed alcune considerazioni circa le implicazioni pratiche di tali metodologie, anche in base alle osservazioni sul campo ottenute durante i mesi di realizzazione di questo progetto. Lo scopo è determinare se e come sia possibile utilizzare il Microsoft Kinect One come unico sistema di motion tracking del paziente in applicazioni cliniche di riabilitazione, quali limiti ci sono nel suo utilizzo e quali categorie di scenari e prove potrebbe supportare.

Motion Control of an Advanced Electric Implement for Agricultural Autonomous Vehicles

Nowadays, the development of intelligent and autonomous vehicles used to perform agricultural activities is essential to improve quantity and quality of agricultural productions. Moreover, with automation techniques it is possible to reduce the usage of agrochemicals and minimize the pollution. The University of Bologna is developing an innovative system for orchard management called ORTO (Orchard Rapid Transportation System). This system involves an autonomous electric vehicle capable to perform agricultural activities inside an orchard structure. The vehicle is equipped with an implement capable to perform different tasks. The purpose of this thesis project is to control the vehicle and the implement to perform an inter-row grass mowing. This kind of task requires a synchronized motion between the traction motors and the implement motors. A motion control system has been developed to generate trajectories and manage their synchronization. Two main trajectories type have been used: a five order polynomial trajectory and a trapezoidal trajectory. These two kinds of trajectories have been chosen in order to perform a uniform grass mowing, paying a particular attention to the constrains of the system. To synchronize the motions, the electronic cams approach has been adopted. A master profile has been generated and all the trajectories have been linked to the master motion. Moreover, a safety system has been developed. The aim of this system is firstly to improve the safety during the motion, furthermore it allows to manage obstacle detection and avoidance. Using some particular techniques obstacles can be detected and recovery action can be performed to overcome the problem. Once the measured force reaches the predefined force threshold, then the vehicle stops immediately its motion. The whole project has been developed by employing Matlab and Simulink. Eventually, the software has been translated into C code and executed on the TI Lauchpad XL board.

Virtual sensing technology applied to a swarm of autonomous robots.

This thesis proposes a novel technology in the field of swarm robotics that allows a swarm of robots to sense a virtual environment through virtual sensors. Virtual sensing is a desirable and helpful technology in swarm robotics research activity, because it allows the researchers to efficiently and quickly perform experiments otherwise more expensive and time consuming, or even impossible. In particular, we envision two useful applications for virtual sensing technology. On the one hand, it is possible to prototype and foresee the effects of a new sensor on a robot swarm, before producing it. On the other hand, thanks to this technology it is possible to study the behaviour of robots operating in environments that are not easily reproducible inside a lab for safety reasons or just because physically infeasible. The use of virtual sensing technology for sensor prototyping aims to foresee the behaviour of the swarm enhanced with new or more powerful sensors, without producing the hardware. Sensor prototyping can be used to tune a new sensor or perform performance comparison tests between alternative types of sensors. This kind of prototyping experiments can be performed through the presented tool, that allows to rapidly develop and test software virtual sensors of different typologies and quality, emulating the behaviour of several hardware real sensors. By investigating on which sensors is better to invest, a researcher can minimize the sensors’ production cost while achieving a given swarm performance. Through augmented reality, it is possible to test the performance of the swarm in a desired virtual environment that cannot be set into the lab for physical, logistic or economical reasons. The virtual environment is sensed by the robots through properly designed virtual sensors. Virtual sensing technology allows a researcher to quickly carry out real robots experiment in challenging scenarios without all the required hardware and environment.

Advanced 4DT flight guidance and control software system

The work presented in this thesis has been part of a Cranfield University research project. This thesis aims to design a flight control law for large cargo aircraft by using predictive control, which can assure flight motion along the flight path exactly and on time. In particular this work involves the modelling of a Boeing C-17 Globemaster III 6DOF model (used as study case), by using DATCOM and Matlab Simulink software. Then a predictive control algorithm has been developed. The majority of the work is done in a Matlab/Simulink environment. Finally the predictive control algorithm has been applied on the aircraft model and its performances, in tracking given trajectory optimized through a 4DT Research Software, have been evaluated.

Sviluppo di tecniche di Speckle tracking per la correzione del movimento in ecografia epatica perfusionale

L'ecografia con mezzo di contrasto è una tecnica non invasiva che consente di visualizzare la micro e la macrocircolazione grazie all'utilizzo di microbolle gassose che si distribuiscono in tutto il sistema cardiovascolare. Le informazioni emodinamiche e perfusionali ricavabili dalle immagini eco con contrasto possono essere utilizzate per costruire un modello a grafo dell'albero vascolare epatico. L'analisi della connettività del grafo rappresenta una strategia molto promettente che potrebbe consentire di sostituire la misurazione del gradiente pressorio venoso del fegato, che richiede cateterismo, determinando un notevole miglioramento nella gestione dei pazienti cirrotici. La presente tesi si occupa della correzione dei movimenti del fegato, che deve essere realizzata prima di costruire il grafo per garantire un'accuratezza adeguata. Per correggere i movimenti è proposta una tecnica di Speckle tracking, testata sia in vitro su sequenze eco sintetiche, sia in vivo su sequenze reali fornite dal Policlinico Sant'Orsola.

Rapid Control Prototyping of an L2+ Highway Assist System

Advanced Driver Assistance Systems (ADAS) are proving to have huge potential in road safety, comfort, and efficiency. In recent years, car manufacturers have equipped their high-end vehicles with Level 2 ADAS, which are, according to SAE International, systems that combine both longitudinal and lateral active motion control. These automated driving features, while only available in highway scenarios, appear to be very promising towards the introduction of hands-free driving. However, as they rely only on an on-board sensor suite, their continuative operation may be affected by the current environmental conditions: this prevents certain functionalities such as the automated lane change, other than requiring the driver to keep constantly the hands on the steering wheel. The enabling factor for hands-free highway driving proposed by Mobileye is the integration of high-definition maps, thus leading to the so-called Level 2+. This thesis was carried out during an internship in Maserati's Virtual Engineering team. The activity consisted of the design of an L2+ Highway Assist System following the Rapid Control Prototyping approach, starting from the definition of the requirements up to the real-time implementation and testing on a simulator of the brand new compact SUV Maserati Grecale. The objective was to enhance the current Level 2 highway driving assistance system with hands-free driving capability; for this purpose an Autonomous Lane Change functionality has been designed, proposing a Model Predictive Control-based decision-maker, in charge of assessing both the feasibility and convenience of performing a lane-change maneuver. The result is a Highway Assist System capable of driving the vehicle in a traffic scenario safely and efficiently, never requiring driver intervention.

Study of the rotational state of Titan using radio tracking data of the Dragonfly mission

Our solar system contains an impressive amount of celestial bodies. For example Saturn posses a huge variety of natural satellites, the diversity in size and physical proprieties of which might amaze imagination. The observational data gathered in 30 years range of deep space missions revealed, that some of these bodies can hide subsurface oceans under their crust. The water, as we know, serves as a fundamental base for a possible appearance of life. This statement is quite exited for the scientific society and serves as a reason for studying so called ”ocean worlds”. In order to detect the celestial bodies with the hidden subsurface ocean, one of the key aspects is the study of their rotational state, which is strongly coupled with the body internal structure. It can be done through the various techniques mentioned in Chapter 1. The main goal of the thesis is the study of rotational state of Titan, whose interior structure expectedly contains liquid ocean layer under its icy crust. Titan is the largest moon of Saturn and it is the second largest moon in the solar system in general. This natural satellite is of particular scientific interest, because it is one of a kind which has substantial atmosphere. The present work was done using radio tracking data of the Dragonfly mission which is one of the next NASA’s missions destined for Titan selected as a part of the New Frontiers Program in 2019. The detailed characteristic of the Dragonfly regarding the landing site and mission lifetime was reported in Chapter 2. The radio-tracking communication link from Titan side was performed using Dragonfly X band transponder according to the schedule tracking opportunity. From Earth side according to the mission, Deep Space Station 25 which is a part of NASA’s Deep Space Network was considered. Only Doppler data was used for studying Titan rotational state, even though there are other reliable techniques described in Chapter 3, that in general could be implemented.

Modeling and Model Predictive Control of an Industrial Hydraulic System

This thesis aims to illustrate the construction of a mathematical model of a hydraulic system, oriented to the design of a model predictive control (MPC) algorithm. The modeling procedure starts with the basic formulation of a piston-servovalve system. The latter is a complex non linear system with some unknown and not measurable effects that constitute a challenging problem for the modeling procedure. The first level of approximation for system parameters is obtained basing on datasheet informations, provided workbench tests and other data from the company. Then, to validate and refine the model, open-loop simulations have been made for data matching with the characteristics obtained from real acquisitions. The final developed set of ODEs captures all the main peculiarities of the system despite some characteristics due to highly varying and unknown hydraulic effects, like the unmodeled resistive elements of the pipes. After an accurate analysis, since the model presents many internal complexities, a simplified version is presented. The latter is used to linearize and discretize correctly the non linear model. Basing on that, a MPC algorithm for reference tracking with linear constraints is implemented. The results obtained show the potential of MPC in this kind of industrial applications, thus a high quality tracking performances while satisfying state and input constraints. The increased robustness and flexibility are evident with respect to the standard control techniques, such as PID controllers, adopted for these systems. The simulations for model validation and the controlled system have been carried out in a Python code environment.

Loading and damage modelling for an integrated SHM system of a prestressed concrete railway bridge in Naples

The thesis explores recent technology developments in the field of structural health monitoring and its application to railway bridge projects. It focuses on two main topics. First, service loads and effect of environmental actions are modelled. In particular, the train moving load and its interaction with rail track is considered with different degrees of detail. Hence, results are compared with real-time experimental measurements. Secondly, the work concerns the identification, definition and modelling process of damages for a prestressed concrete railway bridge, and their implementation inside FEM models. Along with a critical interpretation of the in-field measurements, this approach results in the development of undamaged and damaged databases for the AI-aided detection of anomalies and the definition of threshold levels to prompt automatic alert interventions. In conclusion, an innovative solution for the development of the railway weight-in-motion system is proposed.

An Embedded In-Cabin Lightweight High-Performance 3D Gaze Estimation System

Gaze estimation has gained interest in recent years for being an important cue to obtain information about the internal cognitive state of humans. Regardless of whether it is the 3D gaze vector or the point of gaze (PoG), gaze estimation has been applied in various fields, such as: human robot interaction, augmented reality, medicine, aviation and automotive. In the latter field, as part of Advanced Driver-Assistance Systems (ADAS), it allows the development of cutting-edge systems capable of mitigating road accidents by monitoring driver distraction. Gaze estimation can be also used to enhance the driving experience, for instance, autonomous driving. It also can improve comfort with augmented reality components capable of being commanded by the driver's eyes. Although, several high-performance real-time inference works already exist, just a few are capable of working with only a RGB camera on computationally constrained devices, such as a microcontroller. This work aims to develop a low-cost, efficient and high-performance embedded system capable of estimating the driver's gaze using deep learning and a RGB camera. The proposed system has achieved near-SOTA performances with about 90% less memory footprint. The capabilities to generalize in unseen environments have been evaluated through a live demonstration, where high performance and near real-time inference were obtained using a webcam and a Raspberry Pi4.

Development of a Robotic Wires Storage System for Switchgear Manufacturing Automation

Considering the great development of robotics in industrial automation, the Remodel project aims to reproduce, through the use of Cobots, the wiring activity typical of a human operator and to realize an autonomous storage work. My researches focused on this second topic. In this paper, we will see how to realize a gripper compatible with an Omron TM5X-900, able to perform a pick and place of different types of cables, but also how to compute possible trajectories. In particular, what I needed, was a trajectory going from the Komax, the cables production machine, to a Warehouse taking into account the possible entangles of cables with the robot during its motion. The last part has been dedicated to the synchronization between robot and main machine work.

Development of a state-variable filter for a motion control application.

In collaboration with G.D. SpA I attended an internship with the purpose of developing a filter for the position control of industrial machines during testing and maintenance operations. The filter elaborates a signal in position provided by an electonic handwheel, in order to enable the application to be controlled with a signal in velocity with arbitrarily dynamics chosen during the design phase. Limiting the dynamics of the filter provide a more stable and less demanding reference trajectory which reduce the vibrations and tracking errors of the motor controlled by it. It also prevents misusages of the handwheel from the technician which could end up in harmful interferences between the mechanical parts moved by the handwheel.

Random Access Procedures in 5G IoT via NTN: System level performances

The Internet of Things (IoT) is a critical pillar in the digital transformation because it enables interaction with the physical world through remote sensing and actuation. Owing to the advancements in wireless technology, we now have the opportunity of using their features to the best of our abilities and improve over the current situation. Indeed, the Internet of Things market is expanding at an exponential rate, with devices such as alarms and detectors, smart metres, trackers, and wearables being used on a global scale for automotive and agriculture, environment monitoring, infrastructure surveillance and management, healthcare, energy and utilities, logistics, good tracking, and so on. The Third Generation Partnership Project (3GPP) acknowledged the importance of IoT by introducing new features to support it. In particular, in Rel.13, the 3GPP introduced the so-called IoT to support Low Power Wide Area Networks (LPWAN).As these devices will be distributed in areas where terrestrial networks are not feasible or commercially viable, satellite networks will play a complementary role due to their ability to provide global connectivity via their large footprint size and short service deployment time. In this context, the goal of this thesis is to investigate the viability of integrating IoT technology with satellite communication (SatCom) systems, with a focus on the Random Access(RA) Procedure. Indeed, the RA is the most critical procedure because it allows the UE to achieve uplink synchronisation, obtain the permanent ID, and obtain uplink transmission resources. The goal of this thesis is to evaluate preamble detection in the SatCom environment.

Study of an advanced transport system exploiting magnetic levitation: the Beckhoff XPlanar

The transport system is one of the most important components to be chosen in the design of an automatic machine. There is a wide variety of different choices that can be made in picking this element, each one having its own strengths and its own drawbacks. If it is desired to obtain some elaborate behaviour from the transport system, it is a good idea to think about some flexible and advanced solutions. Among these transport systems, the newest is the Beckhoff XPlanar. This transport system exploits magnetic levitation to move some passive magnetic movers on a completely customizable plane, in an entirely contact-free way. This provides a fast, clean, and noiseless motion, which is extremely desirable in a modern automatic machine. The purpose of this Thesis is to analyse the potentialities and the problems of this new device, starting from the basics. After having presented in detail the topic, an analysis on the hardware components needed to build this system is performed. Then, it is conducted a study on the concepts needed to know how to build a controller having the purpose of dealing with this system. After that, the various types of motion are studied and executed and, later on, some experiments on the real kit are carried out. These studies start from the diagnostic and involve other analyses that are used to test the limits of this transport system. In performing these analyses, it is noticed how the kit presents some problems in reaching the limits of the dynamics. Finally, two different types of station cycle are implemented, which are useful to get a rough idea on the potentialities of this new advanced transport system.