Characterization of integrated Bragg gratings in silicon-on-insulator

Silicon-on-insulator (SOI) is rapidly emerging as a very promising material platform for integrated photonics. As it combines the potential for optoelectronic integration with the low-cost and large volume manufacturing capabilities and they are already accumulate a huge amount of applications in areas like sensing, quantum optics, optical telecommunications and metrology. One of the main limitations of current technology is that waveguide propagation losses are still much higher than in standard glass-based platform because of many reasons such as bends, surface roughness and the very strong optical confinement provided by SOI. Such high loss prevents the fabrication of efficient optical resonators and complex devices severely limiting the current potential of the SOI platform. The project in the first part deals with the simple waveguides loss problem and trying to link that with the polarization problem and the loss based on Fabry-Perot Technique. The second part of the thesis deals with the Bragg Grating characterization from again the point of view of the polarization effect which leads to a better stop-band use filters. To a better comprehension a brief review on the basics of the SOI and the integrated Bragg grating ends up with the fabrication techniques and some of its applications will be presented in both parts, until the end of both the third and the fourth chapters to some results which hopefully make its precedent explanations easier to deal with.

Development of Software Tools for the Test of Ultra Wide Band Receivers

In the last years, the importance of locating people and objects and communicating with them in real time has become a common occurrence in every day life. Nowadays, the state of the art of location systems for indoor environments has not a dominant technology as instead occurs in location systems for outdoor environments, where GPS is the dominant technology. In fact, each location technology for indoor environments presents a set of features that do not allow their use in the overall application scenarios, but due its characteristics, it can well coexist with other similar technologies, without being dominant and more adopted than the others indoor location systems. In this context, the European project SELECT studies the opportunity of collecting all these different features in an innovative system which can be used in a large number of application scenarios. The goal of this project is to realize a wireless system, where a network of fixed readers able to query one or more tags attached to objects to be located. The SELECT consortium is composed of European institutions and companies, including Datalogic S.p.A. and CNIT, which deal with software and firmware development of the baseband receiving section of the readers, whose function is to acquire and process the information received from generic tagged objects. Since the SELECT project has an highly innovative content, one of the key stages of the system design is represented by the debug phase. This work aims to study and develop tools and techniques that allow to perform the debug phase of the firmware of the baseband receiving section of the readers.

Synthesis, characterization and catalytic performances of ruthenium-based catalysts for the acceptorless dehydrogenative coupling of butanol

A growing interest towards new sources of energy has led in recent years to the development of a new generation of catalysts for alcohol dehydrogenative coupling (ADC). This green, atom-efficient reaction is capable of turning alcohol derivatives into higher value and chemically more attractive ester molecules, and it finds interesting applications in the transformation of the large variety of products deriving from biomass. In the present work, a new series of ruthenium-PNP pincer complexes are investigated for the transformation of 1-butanol, one of the most challenging substrates for this type of reactions, into butyl butyrate, a short-chain symmetrical ester widely used in flavor industries. Since the reaction kinetics depends on hydrogen diffusion, the study aimed at identifying proper reactor type and right catalyst concentration to avoid mass transfer interferences and to get dependable data. A comparison between catalytic activities and productivities has been made to establish the role of the different ligands bonded both to the PNP binder and to the ruthenium metal center, and hence to find the best catalyst for this type of reaction.

Analytical model for the prediction of wrinkling of rear pressure bulkheads

In Airbus GmbH (Hamburg) has been developed a new design of Rear Pressure Bulkhead (RPB) for the A320-family. The new model has been formed with vacuum forming technology. During this process the wrinkling phenomenon occurs. In this thesis is described an analytical model for prediction of wrinkling based on the energetic method of Timoshenko. Large deflection theory has been used for analyze two cases of study: a simply supported circular thin plate stamped by a spherical punch and a simply supported circular thin plate formed with vacuum forming technique. If the edges are free to displace radially, thin plates will develop radial wrinkles near the edge at a central deflection approximately equal to four plate thicknesses w0/ℎ≈4 if they’re stamped by a spherical punch and w0/ℎ≈3 if they’re formed with vacuum forming technique. Initially, there are four symmetrical wrinkles, but the number increases if the central deflection is increased. By using experimental results, the “Snaptrhough” phenomenon is described.

L'influenza della preferenza manuale nell'interpretazione di conferenza: un contributo sperimentale

This study is based on a former student’s work, aimed at examining the influence of handedness on conference interpreting. In simultaneous interpreting (IS) both cerebral hemispheres participate in the decoding of the incoming message and in the activation of the motor functions for the production of the output signal. In right-handers language functions are mainly located in the left hemisphere, while left-handers have a more symmetrical representation of language functions. Given that with the development of interpreting skills and a long work experience the interpreters’ brain becomes less lateralized for language functions, in an initial phase left-handers may be «neurobiologically better suited for interpreting tasks» (Gran and Fabbro 1988: 37). To test this hypothesis, 9 students (5 right-handers and 4 left-handers) participated in a dual test of simultaneous and consecutive interpretation (CI) from English into Italian. The subjects were asked to interpret one text with their preferred ear and the other with the non-preferred one, since according neuropsychology aural symmetry reflects cerebral symmetry. The aim of this study was to analyze:1) the differences between the number of errors in consecutive and simultaneous interpretation with the preferred and non-preferred ear; 2) the differences in performance (in terms of number of errors) between right-handed and left-handed, both with the preferred and non-preferred ear; 3) the most frequent types of errors in right and left-handers; 4) the influence of the degree of handedness on interpreting quality. The students’ performances were analyzed in terms of errors of meaning, errors of numbers, omissions of text, omissions of numbers, inaccuracies, errors of nexus, and unfinished sentences. The results showed that: 1) in SI subjects committed fewer errors interpreting with the preferred ear, whereas in CI a slight advantage of the non-preferred ear was observed. Moreover, in CI, right-handers committed fewer mistakes with the non-preferred ear than with the preferred one. 2) The total performance of left-handers proved to be better than that of right-handers. 3) In SI left-handers committed fewer errors of meaning and fewer errors of number than right-handers, whereas in CI left-handers committed fewer errors of meaning and more errors of number than right-handers 4) As the degree of left-handedness increases, the number of errors committed also increases. Moreover, there is a statistically significant left-ear advantage for right-handers and a right-ear one for left-handers. Finally, those who interpreted with their right ear committed fewer errors of number than those who have used their left ear or both ears.

Algoritmi di Compressione secondo Lempel Ziv

Molti metodi di compressione lossless si basano sulle idee che nel 1977 i ricercatori israeliani Abraham Lempel e Jacob Ziv hanno presentato nell’articolo “A universal Algorithm for sequential Data Compression”. In questa tesi viene descritto il metodo di fattorizzazione LZ77, illustrato appunto da Lempel e Ziv, e vengono esposte le strutture dati fondamentali per la sua realizzazione. Sono inoltre descritti due algoritmi CPS1 e CPS2 che realizzano LZ77. Infine, sfruttando i dati raccolti sperimentalmente da Al-Haffedh et al. in “A Comparison of Index-Based Lempel-Ziv LZ77 Factorization Algorithms” [2012], gli algoritmi descritti vengono confrontati in termini di spazio e tempo.