Finite element modeling of the cement-bone interface beneath the tibial tray of a total knee arthroplasty: Study of the stress shielding effect (modellazione agli elementi finiti dell'interfaccia cemento-osso sotto il piatto tibiale di protesi totale di ginocchio: Analisi dello stress shielding)

The goal of this thesis was the study of the cement-bone interface in the tibial component of a cemented total knee prosthesis. One of the things you can see in specimens after in vivo service is that resorption of bone occurs in the interdigitated region between bone and cement. A stress shielding effect was investigated as a cause to explain bone resorption. Stress shielding occurs when bone is loaded less than physiological and therefore it starts remodeling according to the new loading conditions. µCT images were used to obtain 3D models of the bone and cement structure and a Finite Element Analysis was used to simulate different kind of loads. Resorption was also simulated by performing erosion operations in the interdigitated bone region. Finally, 4 models were simulated: bone (trabecular), bone with cement, and two models of bone with cement after progressive erosions of the bone. Compression, tension and shear test were simulated for each model in displacement-control until 2% of strain. The results show how the principal strain and Von Mises stress decrease after adding the cement on the structure and after the erosion operations. These results show that a stress shielding effect does occur and rises after resorption starts.

Eye-trauma: Event driven control software for gesture recognition in medical simulation

Il progetto Eye-Trauma si colloca all'interno dello sviluppo di un simulatore chirurgico per traumi alla zona oculare, sviluppato in collaborazione con Simulation Group in Boston, Harvard Medical School e Massachusetts General Hospital. Il simulatore presenta un busto in silicone fornito di moduli intercambiabili della zona oculare, per simulare diversi tipi di trauma. L'utilizzatore è chiamato ad eseguire la procedura medica di saturazione tramite degli strumenti chirurgici su cui sono installati dei sensori di forza e di apertura. I dati collezionati vengono utilizzati all'interno del software per il riconoscimento dei gesti e il controllo real-time della performance. L'algoritmo di gesture recognition, da me sviluppato, si basa sul concetto di macchine a stati; la transizione tra gli stati avviene in base agli eventi rilevati dal simulatore.

Trauma e Letteratura: tradurre l'11 settembre. "A First Kiss" di Darren Aronofsky e "Baby Lust" di Janice Eidus

Proposta di traduzione dei brani "A First Kiss" di Darren Aronofsky e "Baby Lust" di Janice Eidus, tratti dalla raccolta 110 Stories. New York Writes After September 11 a cura di Ulrich Baer.

The Trauma Towers: Dimensions of Trauma in 9/11 Literature

The topic of this dissertation is the aspects of trauma and reaction to the traumatic experience that can be found in 9/11 literature. The research engages in a comparative analysis of five books that can be categorised as 9/11 literature, which means that the events of 9/11 are central in the novels and are a recurrent theme. The books have been written by authors of different nationalities: "Extremely Loud & Incredibily Close" by J. S. Foer, "Falling Man" by D. DeLillo, "Windows on the World" by F. Beigbeder, "Saturday" by I. McEwan and "The Reluctant Fundamentalist" by M. Hamid. The characters have either experienced the attacks personally or their lives have been largely influenced by the event. In either case, the protagonist has been traumatised by the tragedy. Therefore, in this study two different fields are fused together – the field of comparative literature and that of trauma studies.

Experimental characterization and modelling of a servo-pneumatic system for a knee loading apparatus

The new knee test rig developed in University of Bologna used pneumatic cylinder as actuator system. Specific characterization and modelling about the pneumatic cylinder and the related devices are needed in better controlling the test rig. In this thesis, an experimental environment for the related device is set up with data acquisition system using Real-time Windows Target, Simulink, MatLab. Based on the experimental data, a fitted model for the pneumatic cylinder friction is found.

Interpretare per il Tribunale penale internazionale per il Ruanda. Il trauma vicario e le sue conseguenze sul lavoro degli interpreti.

This dissertation discusses the professional figure of interpreters working for the International Criminal Tribunal for Rwanda (ICTR). The objective is to investigate specific job-related stress factors, particularly the psychological consequences interpreters may have to face, the so-called vicarious trauma. People working for the ICTR are exposed to genocide victims’ violent and shocking testimonies, a situation that could have negative psychological impacts. Online interviews with some interpreters working for the ICTR were carried out in order to arrive at a more thorough understanding of this topic. The study is divided into four chapters. Chapter I outlines the historical aspects of the simultaneous interpreting service in the legal field at the International Military Tribunal, in the trials of the Nazi leaders, and then it analyses a modern international criminal jurisdiction, the ICTR. Chapter II firstly discusses the differences between conference interpreting and court interpreting and in the second part it investigates job-related stress factors for interpreters, focusing on the legal field. Chapter III contains a detailed analysis of vicarious trauma: the main goal is to understand what psychological consequences interpreters have to cope with as a result of translating abused people’s accounts. Chapter IV examines the answers given by ICTR interpreters to the online interviews. The data collected from the interview was compared with the literature survey and the information derived from their comparison was used to put forward some suggestions for studies to be carried out in the future.

Development of an instrumented customizable total knee prosthesis for experimental tests.

Total knee arthroplasty (TKA) has revolutionized the life of millions of patients and it is the most efficient treatment in cases of osteoarthritis. The increase in life expectancy has lowered the average age of the patient, which requires a more enduring and performing prosthesis. To improve the design of implants and satisfying the patient's needs, a deep understanding of the knee Biomechanics is needed. To overcome the uncertainties of numerical models, recently instrumented knee prostheses are spreading. The aim of the thesis was to design and manifacture a new prototype of instrumented implant, able to measure kinetics and kinematics (in terms of medial and lateral forces and patellofemoral forces) of different interchangeable designs of prosthesis during experiments tests within a research laboratory, on robotic knee simulator. Unlike previous prototypes it was not aimed for industrial applications, but purely focusing on research. After a careful study of the literature, and a preliminary analytic study, the device was created modifying the structure of a commercial prosthesis and transforming it in a load cell. For monitoring the kinematics of the femoral component a three-layers, piezoelettric position sensor was manifactured using a Velostat foil. This sensor has responded well to pilot test. Once completed, such device can be used to validate existing numerical models of the knee and of TKA and create new ones, more accurate.It can lead to refinement of surgical techniques, to enhancement of prosthetic designs and, once validated, and if properly modified, it can be used also intraoperatively.