Mitigazione sequestro e stoccaggio di diossido di carbonio

The main objective of my thesis was the technical-economic feasibility of a system of electricity generation integrated with CCS. The policy framework for development processing is part of the recent attention that at the political level has been directed towards the use of CCS technologies with the aim of addressing the problems of actual climate change. Several technological options have been proposed to stabilize and reduce the atmospheric concentrations of carbon dioxide (CO2) among which, the most promising for IPPC (Intergovernmental Panel on Climate Change)are the CCS technologies (Carbon Capture and Storage & Carbon Capture and Sequestration). The remedy proposed for large stationary CO2 sources as thermoelectric power plants is to separate the flue gas capturing CO2 and to store it into deep subsurface geological formations (more than 800 meters of depth). In order to support the identification of potential CO2 storage reservoirs in Italy and in Europe by Geo Capacity(an European database) new studies are developing. From the various literature data analyzed shows that most of the CO2 emitted from large stationary sources comes from the processes of electricity generation (78% of total emissions) and from (about 60%) those using coal especially. The CCS have the objective of return "to the sender" , the ground, the carbon in oxidized form (CO2) after it has been burned by man starting from its reduced form (CH4, oil and coal), then the carbon dioxide is not a "pollutant" if injected into the subsurface, CO2 is an acid reagent that interacts with the rock, with underground fluid and the characteristics of the host rock. The results showed that the CCS technology are very urgent, because unfortunately there are too many industrial sources of CO2 in assets (power plants, refineries, cement plants, steel mills) in the world who are carrying too quickly the CO2 atmospheric concentration levels to values that aren't acceptable for our dear planet.

Mocku for change: an explorative study on the use of “mockumentary” as a new language for climate change education

In the ‘society of acceleration and uncertainty’ (Rosa, 2013), the young are struggling to interpret our complex and fast-changing world. The entity and the velocity of changes are so enormous that we need new narratives or languages to conceptualise them. Among those changes “Climate Change” is placed in a particular difficult position. As the writer A. Ghosh said: “The current climate crisis is also a crisis of culture, and thus of the imagination”. In fact, in today’s literature and cinema a strong dichotomy exists between fictional and non-fictional works, but none of those extremities seems suitable to picture an “adequate representation” of climate change issues, particularly those that are related to future. The main goal of my study, carried out within FEDORA EU project, was to understand to what extent the hybrid film form called “mockumentary” (a language that adopts the aesthetics of factual production to give an illusion of truth to invented stories) could inspire and help students in overcoming the mentioned dichotomy, working as a tool to foster the development of argumentative and imaginative skills needed to picture “immaginary yet realistic” climate change scenarios.

Laboratory verification of predicted permanent deformation in asphalt materials following climate change.

In the past a change in temperature of 5°C most often occurred over intervals of thousands of years. According to estimates by the IPCC, in the XXI century is expected an increase in average temperatures in Europe between 1.8 and 4.0°C in the best case caused by emissions of carbon dioxide and other GHG from human activities. As well as on the environment and economic context, global warming will have effects even on road safety. Several studies have already shown how increasing temperature may cause a worsening of some types of road surface damages, especially rutting, a permanent deformation of the road structures consisting in the formation of a longitudinal depression in the wheelpath, mostly due to the rheological behavior of bitumen. This deformation evolves during the hot season because of the heating capacity of the asphalt layers, in fact, the road surface temperature is up to 24°C higher than air. In this thesis, through the use of Wheeltrack test, it was studied the behavior of some types of asphalt concrete mixtures subjected to fatigue testing at different temperatures. The objectives of this study are: to determine the strain variation of different bituminous mixture subjected to fatigue testing at different temperature conditions; to investigate the effect of aggregates, bitumen and mixtures’ characteristics on rutting. Samples were made in the laboratory mostly using an already prepared mixtures, the others preparing the asphalt concrete from the grading curve and bitumen content. The same procedure was performed for each specimen: preparation, compaction using the roller compactor, cooling and heating before the test. The tests were carried out at 40 - 50 - 60°C in order to obtain the evolution of deformation with temperature variation, except some mixtures for which the tests were carried out only at 50°C. In the elaboration of the results were considered testing parameters, component properties and the characteristics of the mixture. Among the testing parameters, temperature was varied for each sample. The mixtures responded to this variation with a different behavior (linear logarithmic and exponential) not directly correlated with the asphalt characteristics; the others parameters as load, passage frequency and test condition were kept constant. According to the results obtained, the main contribution to deformation is due to the type of binder used, it was found that the modified bitumen have a better response than the same mixtures containing traditional bitumen; to the porosity which affects negatively the behavior of the samples and to the homogeneity ceteris paribus. The granulometric composition did not seem to have interfered with the results. Overall has emerged at working temperature, a decisive importance of bitumen composition, than the other characteristics of the mixture, that tends to disappear with heating in favor of increased dependence of rutting resistance from the granulometric composition of the sample considered. In particular it is essential, rather than the mechanical characteristics of the binder, its chemical properties given by the polymeric modification. To confirm some considered results, the maximum bulk density and the air voids content were determined. Tests have been conducted in the laboratories of the Civil Engineering Department at NTNU in Trondheim according to European Standards.