Protocolli per gestione di informazioni di traffico in reti veicolari ad hoc

Sviluppo ed implementazione di protocolli per il monitoraggio di traffico stradale sulla piattaforma di simulazione iTETRIS per la raccolta di informazioni da utilizzare in applicazioni di Intelligent Transport System.

Internet dei veicoli, un nuovo paradigma per una mobilità intelligente e autonoma

Grazie al continuo affinamento dell'elettronica di consumo e delle tecnologie di telecomunicazione, ad oggi sempre più "cose" sono dotate di capacità sensoriali, computazionali e comunicative, si parla così di Internet delle cose e di oggetti "smart". Lo scopo di questo elaborato è quello di approfondire e illustrare questo nuovo paradigma nell'ambito dell'automotive, evidenziandone caratteristiche, potenzialità e limiti. Ci riferiremo quindi più specificatamente al concetto di Internet dei veicoli per una gestione ottimale della mobilità su strada. Parleremo di questa tecnologia non solo per il supporto che può dare alla guida manuale, ma anche in funzione del concetto di guida autonoma, di come quest'ultima beneficerà di un'interconnessione capillare di tutti gli utenti, i veicoli e le infrastrutture presenti sulla strada, il tutto in un'ottica cooperativa. Illustreremo quali sono le principali sfide per raggiungere uno scenario del genere e quali potrebbero essere le implicazioni più rilevanti.

la fabbrica automatica e i sistemi di controllo integrati

Lo scopo della presente tesi è quello di illustrare alcuni dei principali strumenti messi a disposizione dai controlli automatici a servizio dell’ingegneria, in particolare analizzando la struttura generale di una fabbrica automatica e descrivendone i principali sistemi di controllo. L’elaborato è suddiviso in tre macro parti: la prima ha l’obiettivo di inquadrare quella che è la fabbrica automatica, partendo dal precedente concetto di fabbrica tradizionale fino ad arrivare alla fabbrica moderna, caratterizzata da una spinta flessibilità produttiva determinata da una politica di produzione per lotti con elevati livelli di caratterizzazione. Della fabbrica automatica viene poi approfondita l’integrazione con i calcolatori attraverso il sistema concettuale del CIM, Computer Integrated Manufacturing, e l’impiego di celle di fabbricazione flessibili, ovvero le FMS, Flexible Manufacturing System. La seconda parte è incentrata sull’analisi delle logiche di controllo impiegate all’interno di tutto il processo di progettazione e di produzione, suddivise in tre gruppi: il primo focalizzato sui sistemi per la produzione automatica, NC e DNC; il secondo sui sistemi di simulazione e testing del prodotto, CAD, CAM e CAT; il terzo sui sistemi di controllo e sviluppo dati, SCADA, MES e DCS. La terza ed ultima parte è circoscritta all’approfondimento di un particolare sistema di controllo per la gestione dei processi, ovvero sull’uso del PLC, il Controllore Logico Programmabile. Vengono analizzate le componenti fisiche che lo costituiscono, il funzionamento base, i tempi di esecuzione delle istruzioni, i criteri di scelta e di dimensionamento ed altri aspetti rilevanti. Infine è presente un esempio applicativo di alcuni aspetti sovra citati con il caso dell’azienda bolognese G.D, leader del settore delle macchine automatiche a controllo numerico per la fabbricazione e l’impacchettamento delle sigarette.

Performance of LTE-V2V for Cooperative Awareness

The large scale development of an Intelligent Transportation System is very close. The main component of such a smart environment is the network that provides connectivity for all vehicles. Public safety is the most demanding application because requires a fast, reliable and secure communication. Although IEEE 802.11p is presently the only full wireless standard for vehicular communications, recent advancements in 3GPP LTE provide support to direct communications and the ongoing activities are also addressing the vehicle to vehicle case. This thesis focuses on the resource allocation procedures and performance of LTE-V2V. To this aim, a MATLAB simulator has been implemented and results have been obtained adopting different mobility models for both in-coverage and out-of-coverage scenarios.

Vibro-acoustic analysis of additively manufactured acoustic metamaterials

In the last decade it emerged the interest in new types of acoustic insulating materials, called acoustic metamaterials. These materials are composed by a host and inclusions and are arranged periodically or non-periodically in sub-wavelength elements called meta-atoms. Their inclusions and internal geometries can be manipulated to tailor the acoustic properties, reducing weight, and increasing at the same time their efficiency. Thanks to the high absorbing characteristics that they can achieve, their usage is of particularly interest as material of the core in sandwich panels of aerospace structures to reduce vibrations and noise inside passengers aircraft’s cabin. In addition, since the low frequency signals are difficult to be damped with conventional materials, their usage can guarantee a high transmission loss at low frequencies, obtaining a positive benefit on passengers’ comfort. The performances and efficiency of these materials are enhanced thanks to the new additive manufacturing techniques opposed to the conventional ones uncapable to pro- duce such complex internal geometries. The aim of this work is to study, produce and redesign micro-perforated sandwich panels of a literature case study to achieve high performances in the low frequency range, e.g., below 2000 Hz. Some geometrical parameters, such as perforation ratio and diameter of holes, were considered to realize different models and see the differences in the sound transmission loss. The models were produced by means of Fused Deposition Modelling using an Acrylonitrile Butadiene Styrene (ABS Plus p430) material on a commercial additive manufacturing system. Finally, the frequency response analysis was carried out with Mul2 software, based on the Carrera’s Unified Formulation (CUF) to understand the acoustic and structural properties of the material employed, analyzing the plates’ displacements and the TL results.

Applicazione di un modello bi-obiettivo per la progettazione sostenibile di sistemi produttivi riconfigurabili

Negli ultimi anni la competitività nei mercati è notevolmente cresciuta, la complessità dei prodotti industriali è considerevolmente aumentata e quest’ultimi devono ora essere accuratamente ottimizzati sotto ogni aspetto. I prodotti, oltre ad avere dei cicli di vita più brevi, sono soggetti a un’alta personalizzazione e a una domanda variabile. Per rimanere competitive, le aziende manifatturiere devono possedere nuovi tipi di sistemi di produzione che siano convenienti e molto reattivi a tutti questi cambiamenti del mercato, quali i Sistemi di produzione riconfigurabili (Reconfigurable Manufacturing System - RMS). La particolarità di tali sistemi risiede nella capacità di cambiare rapidamente le loro strutture hardware e software, aspetto che li renda idonei a soddisfare la produzione moderna. Oltre agli aspetti produttivi, l’attenzione odierna è incentrata anche sulle tematiche ambientali legate al risparmio energetico durante i processi produttivi, alla riduzione delle quantità di CO2 emesse e alla sostenibilità ambientale. L’obiettivo di questa tesi è quello di proporre un modello di ottimizzazione multi-obiettivo che tenga conto sia della minimizzazione del tempo complessivo necessario alla movimentazione dei prodotti e alla riconfigurazione delle macchine, e sia della minimizzazione del consumo energetico. Tale modello è stato applicato ad un caso studio realistico che ha permesso di individuare un trade-off tecnico-ambientale individuando la frontiera di Pareto con punto di ottimo (134.6 min; 9346.3 kWh) che si discosta del 57% dal valore trovato ottimizzando la funzione tempo, e dello 0.76% dal valore ottenuto ottimizzando la funzione energia.

Traffic Signal Optimization of Urban Arterial Network by Vehicle-to-Infrastructure

Urbanization has occasionally been linked to negative consequences. Traffic light system in urban arterial networks plays an essential role to the operation of transport systems. The availability of new Intelligent Transportation System innovations paved the way for connecting vehicles and road infrastructure. GLOSA, or the Green Light Optimal Speed Advisory, is a recent integration of vehicle-to-everything (v2x) technology. This thesis emphasized GLOSA system's potential as a tool for addressing traffic signal optimization. GLOSA serves as an advisory to drivers, informing them of the speed they must maintain to reduce waiting time. The considered study area in this thesis is the Via Aurelio Saffi – Via Emilia Ponente corridor in the Metropolitan City of Bologna which has several signalized intersections. Several simulation runs were performed in SUMOPy software on each peak-hour period (morning and afternoon) using recent actual traffic count data. GLOSA devices were placed on a 300m GLOSA distance. Considering the morning peak-hour, GLOSA outperformed the actuated traffic signal control, which is the baseline scenario, in terms of average waiting time, average speed, average fuel consumption per vehicle and average CO2 emissions. A remarkable 97% reduction on both fuel consumption and CO2 emissions were obtained. The average speed of vehicles running through the simulation was increased as well by 7% and a time saved of 25%. Same results were obtained for the afternoon peak hour with a decrease of 98% on both fuel consumption and CO2 emissions, 20% decrease on average waiting time, and an increase of 2% in average speed. In addition to previously mentioned benefits of GLOSA, a 15% and 13% decrease in time loss were obtained during morning and afternoon peak-hour, respectively. Towards the goal of sustainability, GLOSA shows a promising result of significantly lowering fuel consumption and CO2 emissions per vehicle.

Development of a Robotic Wires Storage System for Switchgear Manufacturing Automation

Considering the great development of robotics in industrial automation, the Remodel project aims to reproduce, through the use of Cobots, the wiring activity typical of a human operator and to realize an autonomous storage work. My researches focused on this second topic. In this paper, we will see how to realize a gripper compatible with an Omron TM5X-900, able to perform a pick and place of different types of cables, but also how to compute possible trajectories. In particular, what I needed, was a trajectory going from the Komax, the cables production machine, to a Warehouse taking into account the possible entangles of cables with the robot during its motion. The last part has been dedicated to the synchronization between robot and main machine work.

Fault diagnosis of an automotive suspension system

With the development of the embedded application and driving assistance systems, it becomes relevant to develop parallel mechanisms in order to check and to diagnose these new systems. In this thesis we focus our research on one of this type of parallel mechanisms and analytical redundancy for fault diagnosis of an automotive suspension system. We have considered a quarter model car passive suspension model and used a parameter estimation, ARX model, method to detect the fault happening in the damper and spring of system. Moreover, afterward we have deployed a neural network classifier to isolate the faults and identifies where the fault is happening. Then in this regard, the safety measurements and redundancies can take into the effect to prevent failure in the system. It is shown that The ARX estimator could quickly detect the fault online using the vertical acceleration and displacement sensor data which are common sensors in nowadays vehicles. Hence, the clear divergence is the ARX response make it easy to deploy a threshold to give alarm to the intelligent system of vehicle and the neural classifier can quickly show the place of fault occurrence.

Computer vision in aseptic pharmaceutical manufacturing: a deep learning-based approach to vial inspection and pack formation during a lyophilizer loading cycle

Vision systems are powerful tools playing an increasingly important role in modern industry, to detect errors and maintain product standards. With the enlarged availability of affordable industrial cameras, computer vision algorithms have been increasingly applied in industrial manufacturing processes monitoring. Until a few years ago, industrial computer vision applications relied only on ad-hoc algorithms designed for the specific object and acquisition setup being monitored, with a strong focus on co-designing the acquisition and processing pipeline. Deep learning has overcome these limits providing greater flexibility and faster re-configuration. In this work, the process to be inspected consists in vials’ pack formation entering a freeze-dryer, which is a common scenario in pharmaceutical active ingredient packaging lines. To ensure that the machine produces proper packs, a vision system is installed at the entrance of the freeze-dryer to detect eventual anomalies with execution times compatible with the production specifications. Other constraints come from sterility and safety standards required in pharmaceutical manufacturing. This work presents an overview about the production line, with particular focus on the vision system designed, and about all trials conducted to obtain the final performance. Transfer learning, alleviating the requirement for a large number of training data, combined with data augmentation methods, consisting in the generation of synthetic images, were used to effectively increase the performances while reducing the cost of data acquisition and annotation. The proposed vision algorithm is composed by two main subtasks, designed respectively to vials counting and discrepancy detection. The first one was trained on more than 23k vials (about 300 images) and tested on 5k more (about 75 images), whereas 60 training images and 52 testing images were used for the second one.

Development of a robotic system for switchgear cabling

Industrial robots are an inalienable part of modern automated production. Typical applications of robots include welding, painting, (dis)assembly, packaging, labeling, palletizing, pick and place and others. Many of that applications includes object manipulation. If the shape and position of the object are known in advance, it is possible to design the trajectory of the robot’s end-effector to take and place. Such a strategy is applicable for rigid objects and widely used in the manufacturing field. But flexible (deformable) objects can change their shape and position upon contact with the robot’s end-effector or environment. That is the reason why the general approach is unacceptable. It means that the robot can fail to grasp such an object and can’t place it in the desired position. This thesis has addressed the problem of cable manipulation by bilateral robotic setup for the industrial manufacturing of electrical switchgear. The considered solution is based on the idea of tensioned cable. If the cable was grasped by the ends and tensioned, it has a line shape. Since the position of the robot’s end-effectors known, the position of the cable is known as well. Such an approach is capable to place cable in cable ducts of switchgear. The considered solution has been tested experimentally on a real bilateral robotic setup.

Design and Implementation of Single phase 230V to Three Phase Inverter Based on the Embedded System STM-32 Applied to motor control

In the field of Power Electronics, several types of motor control systems have been developed using STM microcontroller and power boards. In both industrial power applications and domestic appliances, power electronic inverters are widely used. Inverters are used to control the torque, speed, and position of the rotor in AC motor drives. An inverter delivers constant-voltage and constant-frequency power in uninterruptible power sources. Because inverter power supplies have a high-power consumption and low transfer efficiency rate, a three-phase sine wave AC power supply was created using the embedded system STM32, which has low power consumption and efficient speed. It has the capacity of output frequency of 50 Hz and the RMS of line voltage. STM32 embedded based Inverter is a power supply that integrates, reduced, and optimized the power electronics application that require hardware system, software, and application solution, including power architecture, techniques, and tools, approaches capable of performance on devices and equipment. Power inverters are currently used and implemented in green energy power system with low energy system such as sensors or microcontroller to perform the operating function of motors and pumps. STM based power inverter is efficient, less cost and reliable. My thesis work was based on STM motor drives and control system which can be implemented in a gas analyser for operating the pumps and motors. It has been widely applied in various engineering sectors due to its ability to respond to adverse structural changes and improved structural reliability. The present research was designed to use STM Inverter board on low power MCU such as NUCLEO with some practical examples such as Blinking LED, and PWM. Then we have implemented a three phase Inverter model with Steval-IPM08B board, which converter single phase 230V AC input to three phase 380 V AC output, the output will be useful for operating the induction motor.

Characterization Of Single Use Reactor Used For The Manufacturing Of Formulated Products Within The Pharmaceutical Industry

Mixing is a fundamental unit operation in the pharmaceutical industry to ensure consistent product quality across different batches. It is usually carried out in mechanically stirred tanks, with a large variety of designs according to the process requirements. A key aspect of pharmaceutical manufacturing is the extensive and meticulous cleaning of the vessels between runs to prevent the risk of contamination. Single-use reactors represent an increasing trend in the industry since they do not require cleaning and sterilization, reducing the need for utilities such as steam to sterilize equipment and the time between production batches. In contrast to traditional stainless steel vessels, single-use reactors consist of a plastic bag used as a vessel and disposed of after use. This thesis aims to characterize the fluid dynamics features and the mixing performance of a commercially available single-use reactor. The characterization employs a combination of various experimental techniques. The analysis starts with the visual observation of the liquid behavior inside the vessel, focusing on the vortex shape evolution at different impeller speeds. The power consumption is then measured using a torque meter to quantify the power number. Particle Image Velocimetry (PIV) is employed to investigate local fluid dynamics properties such as mean flow field and mean and rms velocity profiles. The same experimental setup of PIV is exploited for another optical measurement technique, the Planar Laser-Induced Fluorescence (PLIF). The PLIF measurements complete the characterization of the reactor with the qualitative visualization of the turbulent flow and the quantitative assessment of the system performance through the mixing time. The results confirm good mixing performances for the single-use reactor over the investigated impeller speeds and reveal that the filling volume plays a significant role in the fluid dynamics of the system.