Design of alternative energy storage systems for hybrid vehicles based on statistical processing of driving cycles information

Hybrid vehicles represent the future for automakers, since they allow to improve the fuel economy and to reduce the pollutant emissions. A key component of the hybrid powertrain is the Energy Storage System, that determines the ability of the vehicle to store and reuse energy. Though electrified Energy Storage Systems (ESS), based on batteries and ultracapacitors, are a proven technology, Alternative Energy Storage Systems (AESS), based on mechanical, hydraulic and pneumatic devices, are gaining interest because they give the possibility of realizing low-cost mild-hybrid vehicles. Currently, most literature of design methodologies focuses on electric ESS, which are not suitable for AESS design. In this contest, The Ohio State University has developed an Alternative Energy Storage System design methodology. This work focuses on the development of driving cycle analysis methodology that is a key component of Alternative Energy Storage System design procedure. The proposed methodology is based on a statistical approach to analyzing driving schedules that represent the vehicle typical use. Driving data are broken up into power events sequence, namely traction and braking events, and for each of them, energy-related and dynamic metrics are calculated. By means of a clustering process and statistical synthesis methods, statistically-relevant metrics are determined. These metrics define cycle representative braking events. By using these events as inputs for the Alternative Energy Storage System design methodology, different system designs are obtained. Each of them is characterized by attributes, namely system volume and weight. In the last part the work, the designs are evaluated in simulation by introducing and calculating a metric related to the energy conversion efficiency. Finally, the designs are compared accounting for attributes and efficiency values. In order to automate the driving data extraction and synthesis process, a specific script Matlab based has been developed. Results show that the driving cycle analysis methodology, based on the statistical approach, allows to extract and synthesize cycle representative data. The designs based on cycle statistically-relevant metrics are properly sized and have satisfying efficiency values with respect to the expectations. An exception is the design based on the cycle worst-case scenario, corresponding to same approach adopted by the conventional electric ESS design methodologies. In this case, a heavy system with poor efficiency is produced. The proposed new methodology seems to be a valid and consistent support for Alternative Energy Storage System design.

Autonomous Vehicle and Internet on Vehicles

In questa tesi mi occupo di spiegare come si comportano i veicoli autonomi per prendere tutte le decisioni e come i dati dei sensori di ogni auto vengono condivisi con la flotta di veicoli

Development of an instrumented customizable total knee prosthesis for experimental tests.

Total knee arthroplasty (TKA) has revolutionized the life of millions of patients and it is the most efficient treatment in cases of osteoarthritis. The increase in life expectancy has lowered the average age of the patient, which requires a more enduring and performing prosthesis. To improve the design of implants and satisfying the patient's needs, a deep understanding of the knee Biomechanics is needed. To overcome the uncertainties of numerical models, recently instrumented knee prostheses are spreading. The aim of the thesis was to design and manifacture a new prototype of instrumented implant, able to measure kinetics and kinematics (in terms of medial and lateral forces and patellofemoral forces) of different interchangeable designs of prosthesis during experiments tests within a research laboratory, on robotic knee simulator. Unlike previous prototypes it was not aimed for industrial applications, but purely focusing on research. After a careful study of the literature, and a preliminary analytic study, the device was created modifying the structure of a commercial prosthesis and transforming it in a load cell. For monitoring the kinematics of the femoral component a three-layers, piezoelettric position sensor was manifactured using a Velostat foil. This sensor has responded well to pilot test. Once completed, such device can be used to validate existing numerical models of the knee and of TKA and create new ones, more accurate.It can lead to refinement of surgical techniques, to enhancement of prosthetic designs and, once validated, and if properly modified, it can be used also intraoperatively.

Osservatore e controllore sensorless ad elevate prestazioni per propulsione elettrica di Unmanned Aerial Vehicles

Negli ultimi anni, tra le varie tecnologie che hanno acquisito una sempre maggiore popolarità e diffusione, una di particolare rilevanza è quella degli Unmanned Aerial Vehicles. Di questi velivoli, quelli che stanno riscuotendo maggiore successo sono i multirotori, alimentati esclusivamente da azionamenti elettrici disposti in opportune posizioni della struttura. Particolari sforzi sono stati recentemente dedicati al miglioramento di questa tecnologia in termini di efficienza e precisione, tuttavia quasi sempre si trascura la vitale importanza dello sfruttamento efficiente dei motori elettrici. La tecnica di pilotaggio adottata nella quasi totalità dei casi per questi componenti è il BLDC sensorless, anche se la struttura si dimostra spesso essere PMSM, dunque inadatta all’uso di questa strategia. Il controllo ideale per i PMSM risulterebbe essere FOC, tuttavia per l'implementazione sensorless molti aspetti scontati nel BLDC devono essere affrontati, in particolare bisogna risolvere problemi di osservazione e identificazione. Durante la procedura di avviamento, efficienti strategie di self-commissioning vengono adottate per l’identificazione dei parametri elettrici. Per la fase di funzionamento nominale viene proposto un osservatore composto da diversi componenti interfacciati tra loro tramite un filtro complementare, il tutto al fine di ottenere una stima di posizione e velocità depurata dai disturbi. In merito al funzionamento in catena chiusa, vengono esposte valutazioni preliminari sulla stabilità e sulla qualità del controllo. Infine, per provare la validità degli algoritmi proposti, vengono mostrati i risultati delle prove sperimentali condotte su un tipico azionamento per UAV, pilotato da una scheda elettronica progettata appositamente per l’applicazione in questione. Vengono fornite inoltre indicazioni sull’implementazione degli algoritmi studiati, in particolare considerazioni sull’uso delle operazioni a virgola fissa per velocizzare l'esecuzione.